SN74LVC1T45DCKR vs SN74AUP1T34-Q1 비교
다음의 상세 나란히 비교: SN74LVC1T45DCKR 제조: Texas Instruments 및 SN74AUP1T34-Q1 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
SN74LVC1T45DCKR - 420Mbps Single-Bit Dual-Supply Level Shifter | TI
SN74LVC1T45DCKR ✓ 활성Texas Instruments
SN74AUP1T34-Q1 - 1-Bit Dual-Supply Level Translator | Texas Instruments
SN74AUP1T34-Q1 ✓ 활성사양 비교
| 파라미터 | SN74LVC1T45DCKR | SN74AUP1T34-Q1 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Logic ICs | Logic ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.14 | $0.18 |
| 기능 | Single-bit dual-supply bus transceiver / voltage level translator | 1-bit noninverting voltage-level translator |
| 채널 수 | 1 channel, bidirectional | 1 |
| 데이터 속도 | 420 Mbps | — |
| Direction Control | DIR pin (high = A->B, low = B->A) | — |
| Output Enable | OE pin, tri-states outputs when high | — |
| VCCA Supply Range | 1.65 V to 5.5 V | — |
| VCCB Supply Range | 1.65 V to 5.5 V | — |
| Logic Family | LVC (Low-Voltage CMOS) | — |
| Technology | CMOS | — |
| Propagation Delay (typ @ 3.3 V) | 3.3 ns | — |
| Quiescent Current (max) | 10 uA | — |
| Output Drive (at 3.3 V) | ±24 mA | — |
| ESD Protection | 2000 V HBM per JESD 22 A114-A | — |
| Input Tolerance | 5.5 V tolerant on both ports | — |
| VCC Isolation (Ioff) | Yes - both ports Hi-Z if either VCC at GND | — |
| 동작 온도 | -40C to +85C | -40C to +125C |
| 패키지 | SC-70-6 (DCK) | SC-70-5 (DCK) |
| 실장 유형 | Surface Mount | Surface Mount |
| RoHS 상태 | Compliant | Compliant |
| Lead-Free | Yes | — |
| Translation Direction | — | Unidirectional (A to B) |
| Supply Rails | — | Dual (VCCA and VCCB), configurable |
| VCCA Range | — | [DATA_NEEDED: VCCA range] |
| VCCB Range | — | [DATA_NEEDED: VCCB range] |
| 출력 유형 | — | Push-Pull |
| Bits per Element | — | 1 |
| Polarity | — | Non-Inverting |
| Qualification | — | AEC-Q100 qualified (automotive) |
| Family | — | AUP (Advanced Ultra-low Power) |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |