SN75176BD vs SP3232EP-L 비교
다음의 상세 나란히 비교: SN75176BD 제조: Texas Instruments 및 SP3232EP-L 제조: Sipex. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SN75176BD | SP3232EP-L |
|---|---|---|
| 브랜드 | Texas Instruments | Sipex |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Differential bus transceiver | RS-232 transceiver |
| 공급 전압 | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | — |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | — |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 동작 온도 범위 | 0 °C to 70 °C | — |
| 패키지 | SOIC (D), 8 pins | 16-pin SSOP |
| 실장 유형 | Surface mount | Surface mount |
| 핀 수 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Supply Voltage Range | — | +3.0 V to +5.5 V |
| Minimum Data Rate Under Full Load | — | 120 kbps |
| RS-232 Interoperability | — | Down to +2.7 V power source |
| Enhanced ESD Protection | — | ±15 kV |
| Compliance | — | True EIA/TIA-232-F standards from +3.0V to +5.5V power supply |
| Low-Power Shutdown | — | 1 µA with receivers active (SP3222) |
| 핀 수 | — | 16 |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Levels | — | [DATA_NEEDED: driver output voltage levels] |
| Receiver Input Levels | — | [DATA_NEEDED: receiver input voltage thresholds] |
| Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |