SP3232EET-L vs SP485ECN-L 비교
다음의 상세 나란히 비교: SP3232EET-L 제조: MaxLinear 및 SP485ECN-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ 활성사양 비교
| 파라미터 | SP3232EET-L | SP485ECN-L |
|---|---|---|
| 브랜드 | MaxLinear | MaxLinear |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | Unknown | 활성 |
| Product Type | RS-232 transceiver | RS-422/RS-485 half-duplex line transceiver |
| Transceiver Configuration | 2 transmit / 2 receive channels | — |
| Supply Voltage Range | +3.0 V to +5.5 V | — |
| 데이터 속도 | 120 kbps | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps |
| 공급 전류 | 1 mA | [DATA_NEEDED: typical and maximum supply current] |
| 동작 온도 | -40 C to +85 C | — |
| 패키지 | 16-SOIC | 8-pin SOIC |
| Interface Standard | RS-232 / EIA/TIA-232-F | — |
| Charge-Pump Capacitor Requirement | 0.1 uF in 3.3 V operation | — |
| Shutdown Supply Current | 1 uA with receivers active | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| 실장 유형 | Surface mount | Surface mount |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | Lead-free product marking is stated in the verified search data |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| 공급 전압 | — | 5 V |
| Protocol Support | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Technology | — | BiCMOS |
| Package Width | — | 0.154 in (3.90 mm) |
| Packaging | — | Tape and reel |
| Human Body Model ESD Tolerance | — | Over ±15 kV |
| IEC 61000-4-2 Air Discharge ESD Tolerance | — | Over ±15 kV |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Voltage | — | [DATA_NEEDED: receiver input voltage range] |
| Output Current | — | [DATA_NEEDED: driver output current] |
| Shutdown Support | — | Not stated for SP485ECN-L in the verified data |