SP485REP-L vs SP485R 비교
다음의 상세 나란히 비교: SP485REP-L 제조: Exar Corporation 및 SP485R 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SP485REP-L | SP485R |
|---|---|---|
| 브랜드 | Exar Corporation | MaxLinear |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Receiver Unit Load | 1/10 unit load | — |
| Supported Transceivers per Line | More than 400 transceivers | — |
| Receiver Input Impedance | 150 kOhm typical | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Propagation Delay | 60 ns | — |
| Minimum Operating Temperature | -40 C | — |
| Maximum Operating Temperature | +85 C | — |
| Duplex Configuration | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| 패키지 | 8-pin plastic DIP | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP |
| 실장 유형 | Through-hole | Surface Mount (SOIC) / Through-Hole (PDIP) |
| Driver Configuration | 1/1 differential driver | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: rohs status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| 기능 | — | Transceiver |
| Protocol | — | RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis mV] |
| 데이터 속도 | — | 5 Mbps |
| 공급 전압 | — | 4.75 V to 5.25 V |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range C] |
| Receiver Input Impedance (RIN) | — | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) |
| Bus Loading | — | 1/10 unit load (supports 400+ transceivers on bus) |
| Input Sensitivity | — | +/-200 mV |
| Common-Mode Input Voltage Range | — | -7 V to +12 V |
| Shutdown Mode | — | Yes |
| Pin-to-Pin Equivalent | — | SP485 (with higher RIN) |