SP490ES-L vs SN75176BD 비교
다음의 상세 나란히 비교: SP490ES-L 제조: MaxLinear 및 SN75176BD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SP490ES-L | SN75176BD |
|---|---|---|
| 브랜드 | MaxLinear | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $0.15 |
| Product Type | Full-duplex differential line transceiver | Differential bus transceiver |
| Supported Standards | RS-485 and RS-422 | TIA/EIA-422-B and TIA/EIA-485-A |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Maximum Signaling Rate | 5 Mbps | — |
| 공급 전압 | 5 V | 5 V |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Common-Mode Range | Wide common-mode range | — |
| Architecture | Full duplex | — |
| Driver/Receiver Organization | 1 driver and 1 receiver | — |
| 패키지 | 8-pin plastic DIP | SOIC (D), 8 pins |
| Package Designation | 8-PDIP | — |
| Package Lead Pitch | 7.62 mm | — |
| 실장 유형 | Through-hole | Surface mount |
| Packaging | Tube | — |
| Compliance Status | [DATA_NEEDED: RoHS compliance] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| 동작 온도 범위 | — | 0 °C to 70 °C |
| 핀 수 | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |