STM32F071CBT7 vs STM32F071CBT6 비교
다음의 상세 나란히 비교: STM32F071CBT7 제조: STMicroelectronics 및 STM32F071CBT6 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
STM32F071CBT7 - 48MHz Cortex-M0 MCU, 128KB Flash | STMicroelectronics
STM32F071CBT7 ✓ 활성사양 비교
| 파라미터 | STM32F071CBT7 | STM32F071CBT6 |
|---|---|---|
| 브랜드 | STMicroelectronics | STMicroelectronics |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| Core | ARM Cortex-M0 32-bit | — |
| 최대 클록 주파수 | 48 MHz | — |
| Flash Memory Size | 128 KB | — |
| SRAM Size | 16 KB (with hardware parity) | — |
| Supply Voltage (VDD) | 2.0 V to 3.6 V | — |
| I/O Supply (VDDIO2) | 1.65 V to 3.6 V | — |
| 패키지 | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) |
| 동작 온도 범위 | -40 C to +85 C (industrial grade) | — |
| Number of I/Os | Up to 37 fast GPIOs, 5 V-tolerant | — |
| ADC | 12-bit, 1 MSPS, up to 16 channels | 12-bit |
| DAC | 12-bit, 1 MSPS, 2 channels | 12-bit, 2 channels |
| Timers | 12 timers (1x 16-bit advanced, 5x 16-bit general, 2x 16-bit basic, 2x watchdog, 2x SysTick) | — |
| Communication Interfaces | USB FS (Device), 2x I2C, 2x SPI, 4x USART, HDMI CEC, CAN | [DATA_NEEDED: complete communication interface list] |
| CRC Calculation Unit | Yes, 32-bit hardware CRC | — |
| RTC | Yes, with 20 backup registers | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 32-bit microcontroller |
| Processor Core | — | Arm 32-bit Cortex-M0 |
| Maximum Core Frequency | — | 48 MHz |
| Flash Memory | — | 128 KB (128K x 8) |
| SRAM | — | 16 KB with hardware parity |
| Digital and I/O Supply | — | 2.0 V to 3.6 V |
| Timer Count | — | 12 timers |
| General-Purpose Timers | — | 7 x 16-bit |
| Additional Timer | — | 1 x 32-bit |
| Advanced-Control Timer | — | 1 |
| CRC Engine | — | Yes |
| 실장 유형 | — | Surface Mount |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| GPIO Count | — | [DATA_NEEDED: GPIO count] |