STM32G474RBT6 vs STM32G473RBT6 비교
다음의 상세 나란히 비교: STM32G474RBT6 제조: STMicroelectronics 및 STM32G473RBT6 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
STM32G474RBT6 - 170MHz Cortex-M4F MCU 128KB LQFP-64 | STMicroelectronics
STM32G474RBT6 ✓ 활성
사양 비교
| 파라미터 | STM32G474RBT6 | STM32G473RBT6 |
|---|---|---|
| 브랜드 | STMicroelectronics | STMicroelectronics |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 단가 (USD) | $3.77 | — |
| Core | Arm Cortex-M4F with FPU + DSP | — |
| Maximum CPU Frequency | 170 MHz | — |
| DMIPS | 213 | — |
| Flash Memory | 128 KB (dual-bank) | 128 KB |
| SRAM | 32 KB (data) | — |
| Backup SRAM | 4 KB | — |
| Supply Voltage (VDD/VDDA) | 1.71 V to 3.6 V | — |
| 패키지 | 64-pin LQFP (10x10 mm) | 64-pin LQFP, 10 mm x 10 mm |
| 동작 온도 | -40 C to +85 C (grade 6) | — |
| GPIO Count | 52 (on 64-pin package) | — |
| 12-bit ADC | 5x ADC, up to 4 MSPS | — |
| 12-bit DAC | 4x DAC (3 buffered + 1 unbuffered) | — |
| Comparators | 7x ultra-high-speed | — |
| Operational Amplifiers | 4x on-chip op-amps | — |
| Math Accelerator | CORDIC + FMAC + filter engine | Yes |
| Advanced timers | 2x 16-bit (10 ch each) | — |
| General-purpose timers | 5x 16-bit + 2x 32-bit | — |
| CAN FD | 1x FDCAN | — |
| USB Type-C / USB PD | Yes (USB 2.0 FS + UCPD) | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 32-bit Arm Cortex-M4 microcontroller |
| 최대 클록 주파수 | — | 170 MHz |
| Program Memory Organization | — | 128K x 8 |
| Processor Architecture | — | Arm Cortex-M4 32-bit RISC |
| Supply Options | — | 1.8 V, 2.5 V, 3.3 V |
| Analog Integration | — | High level |
| Product Series | — | STM32G4 mainstream series |
| 실장 유형 | — | Surface mount |
| RAM Capacity | — | [DATA_NEEDED: RAM capacity] |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| ADC Resolution | — | [DATA_NEEDED: ADC resolution] |
| Communication Interfaces | — | [DATA_NEEDED: communication interfaces] |
| Timer Configuration | — | [DATA_NEEDED: timer configuration] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |