THS1041CPW vs THS1040CPW 비교
다음의 상세 나란히 비교: THS1041CPW 제조: Texas Instruments 및 THS1040CPW 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | THS1041CPW | THS1040CPW |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 분해능 | 10 bit | 10 bit |
| 샘플링 속도 | 40 MSPS | 40 MSPS |
| Input Channels | 1 channel | — |
| Architecture | Pipelined ADC | — |
| Analog Input Configuration | Differential and single-ended | — |
| Programmable Gain Amplifier | Integrated PGA | — |
| Internal Clamp | Internal precision clamp | — |
| Analog Supply Voltage | 3.0 V to 3.6 V | — |
| Digital Supply Voltage | 3.0 V to 3.6 V | — |
| 패키지 | 28-pin TSSOP | 28-TSSOP (0.173 inch, 4.40 mm width) |
| 실장 유형 | Surface mount | Surface mount |
| Sample-and-Hold | Integrated sample-and-hold circuit | — |
| Output Resolution Code Count | 1,024 codes | — |
| Conversion Architecture | Single-input pipeline converter | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 입력 전압 범위 | [DATA_NEEDED: analog input voltage range] | — |
| Power Consumption | [DATA_NEEDED: power consumption] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Input Bandwidth | [DATA_NEEDED: input bandwidth] | — |
| Digital Interface | [DATA_NEEDED: digital interface] | — |
| 기준 전압 | [DATA_NEEDED: reference voltage] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Converter Type | — | Pipelined analog-to-digital converter |
| Number of Channels | — | 1 channel |
| 공급 전압 | — | 3 V |
| Input Type | — | Single-ended or differential |
| Technology | — | CMOS |
| Power Class | — | Low-power ADC |
| Output Interface | — | Parallel |
| Reference Selection | — | Multiple voltage-reference options |
| Analog Input Count | — | 1 input |
| Number of Output Codes | — | 1,024 codes |
| Maximum Sample Rate | — | 40 million samples per second |
| Analog Input Bandwidth | — | [DATA_NEEDED: analog input bandwidth] |
| Conversion Latency | — | [DATA_NEEDED: conversion latency] |
| Typical Power Consumption | — | [DATA_NEEDED: typical power consumption] |
| Output Coding | — | [DATA_NEEDED: output coding] |