THS4021ID vs THS4021CD 비교
다음의 상세 나란히 비교: THS4021ID 제조: Texas Instruments 및 THS4021CD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | THS4021ID | THS4021CD |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Single-channel voltage-feedback amplifier | Voltage-feedback amplifier |
| Gain-Bandwidth Product | 2 GHz | [DATA_NEEDED: gain-bandwidth product] |
| Closed-Loop Bandwidth | 290 MHz | — |
| Slew Rate | 470 V/µs | 470 V/us |
| Settling Time | 30 ns to 0.1% | — |
| Input Noise Type | Ultra-low voltage noise | — |
| Number of Channels | 1 channel | — |
| Supply Voltage Range | [DATA_NEEDED: Supply Voltage Range] | plus or minus 16 V, or 32 V total |
| Output Current | [DATA_NEEDED: Output Current] | [DATA_NEEDED: output current] |
| Input Offset Voltage | [DATA_NEEDED: Input Offset Voltage] | [DATA_NEEDED: input offset voltage] |
| Voltage Noise Density | [DATA_NEEDED: Voltage Noise Density] | — |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: Common-Mode Rejection Ratio] | — |
| Open-Loop Gain | [DATA_NEEDED: Open-Loop Gain] | [DATA_NEEDED: open-loop gain] |
| 동작 온도 범위 | [DATA_NEEDED: Operating Temperature Range] | [DATA_NEEDED: operating temperature range] |
| 패키지 | 8-pin SOIC, 3.90 mm width | 8-pin SOIC, 0.154 inch body width, 3.90 mm |
| 실장 유형 | Surface mount | Surface mount |
| RoHS 상태 | [DATA_NEEDED: RoHS Status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH Status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 Qualification] | — |
| Channel Count | — | 1 channel |
| Small-Signal Bandwidth | — | 350 MHz |
| Input Noise | — | [DATA_NEEDED: input-referred voltage noise density] |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Operating Supply Range | — | plus or minus 16 V |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |