10CL040YU484A7G - Cyclone 10 LP FPGA 39.6K LE | Intel
부품 번호: 10CL040YU484A7G ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $74.2 | $742.00 |
| 100 | $68.9 | $6,890.00 |
| 500 | $62.4 | $31,200.00 |
| 1,000 | $56.8 | $56,800.00 |
10CL040YU484A7G 개요
An FPGA (field-programmable gate array) is a programmable logic device that lets engineers implement arbitrary digital logic — from glue logic and state machines to full processor subsystems — by configuring an array of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable interconnect. Within the broader semiconductor taxonomy, an FPGA sits between a hard-wired ASIC and a microcontroller: more flexible than an ASIC, more deterministic and parallel than an MCU. The Cyclone 10 LP family targets applications that need real DSP and parallel processing without the cost or power of mid-range FPGAs.
Key features of the 10CL040YU484A7G include 4 PLLs for clock synthesis, 1.11 Mbit of embedded RAM organized into M9K blocks, 4 Mb of flash configuration memory, support for LVDS, LVCMOS, SSTL, and PCI Express at 1 A core supply. The 484-FBGA package exposes 325 user I/Os, providing generous connectivity for parallel buses, memory interfaces, and high-speed serial links. Compared with the previous-generation Cyclone IV E family, Cyclone 10 LP delivers up to 2× higher core performance and 50% lower power at the same logic capacity.
The device uses a 60 nm low-power process and integrates transceivers, multipliers, and a hard PCI Express Gen1 controller on selected package variants. Designers use Intel Quartus Prime Lite edition to synthesize and place-and-route the device. The 10CL040YU484A7G supports configuration via serial flash, parallel flash, or JTAG, and is compatible with the Nios II soft-core processor for embedded applications.
Typical applications include industrial machine vision, motor control, video processing, LED signage controllers, and low-cost software-defined radio front ends. The wide I/O count and embedded memory make it suitable for digital signal processing pipelines that exceed microcontroller capabilities but do not justify a high-cost FPGA.
When designing with the 10CL040YU484A7G, ensure the PCB exposes at least one configuration mode header (JTAG, AS, or PS) for factory programming. The 484-FBGA package requires 1.0 mm ball pitch and 4-layer PCB with controlled-impedance routing for high-speed interfaces; signal-integrity simulation is recommended for DDR3 or LVDS channels. Decoupling follows the reference design: bulk 100 µF, 10 µF, 1 µF, and 0.1 µF ceramic capacitors placed close to each power pin pair.
This page synthesizes distributor pricing, same-family Cyclone 10 LP drop-in alternatives, and practical PCB design notes not assembled in the manufacturer datasheet alone, helping engineers evaluate supply options and accelerate board bring-up.
드롭인 대체품: 10CL040YU484A7G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 10CL040YU484A7G (동일 폼 팩터 및 풋프린트) — 차이점: Package, Maximum User I/O, Process Technology, Speed Grade, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
10CL040YU484C6G
✅ 드롭인✓ 재고 있음
$24.1 / 개
데이터시트 보기 →10CL040YU484C8G
✅ 드롭인✓ 재고 있음
$32.4 / 개
데이터시트 보기 →10CL040YU484I7G
✅ 드롭인✓ 재고 있음
$48.75 / 개
데이터시트 보기 →10CL040YU484I8G
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
10CL040YU484A7G 최대 정격 & 전기적 특성
| Family | Cyclone 10 LP |
| Logic Elements | 39,600 LE |
| Adaptive Logic Modules (ALMs) | 15,800 |
| Embedded Memory | 1,161,216 bits (1.11 Mbit) |
| Number of I/Os | 325 user I/O |
| Number of PLLs | 4 |
| Embedded Multipliers (18x18) | 116 |
| Configuration Memory | On-chip flash supported |
| 패키지 | 484-pin FineLine BGA (UBGA), 1.0 mm pitch |
| Operating Supply Voltage (Core) | 1.0 V / 1.2 V |
| 동작 온도 | -40 °C to +125 °C (automotive grade) |
| 실장 유형 | Surface Mount (BGA) |
| Process Node | 60 nm low-power |
| MSL 레벨 | MSL3 (per JEDEC J-STD-020) |
| RoHS 상태 | Compliant |
10CL040YU484A7G 484-pin fineline bga (ubga), 1.0 mm pitch 핀 구성 가이드
10CL040YU484A7G(484-pin fineline bga (ubga), 1.0 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 10CL040YU484A7G.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
10CL040YU484A7G 적합 용도: 6 애플리케이션s: Industrial Machine Vision, Motor Control and Servo Drives, Video Processing and Display Controllers, LED Signage and Pixel Mapping, Low-Cost Software-Defined Radio, Industrial IoT Gateways.
Industrial Machine Vision
The 10CL040YU484A7G is well-suited for industrial machine vision pipelines that ingest MIPI or parallel LVDS image sensor data, perform Bayer demosaicing and edge detection in real time, and output processed frames over GigE Vision. Its 116 18x18 multipliers and 1.11 Mbit embedded memory allow two-dimensional convolution kernels (5x5 Sobel, Gaussian) at 60 fps for 720p streams without external memory. The 325 user I/Os expose up to 12 LVDS pairs, sufficient for direct MIPI-CSI-2 sensor interfacing. The automotive-grade temperature range supports factory floor and outdoor deployments.
추천
Motor Control and Servo Drives
Field-oriented control (FOC) of three-phase PMSM or BLDC motors demands deterministic PWM generation, fast ADC sampling, and encoder feedback processing — all of which the 10CL040YU484A7G handles in a single chip. Its 116 embedded multipliers execute Clarke/Park transforms and PID loops at 100 kHz control rates without processor offload. The 4 PLLs generate jitter-free PWM carriers and quadrature encoder clocks. Designers typically pair this FPGA with external gate drivers and current-sense ADCs, leveraging the 325 I/Os for parallel interface expansion.
추천
Video Processing and Display Controllers
The 10CL040YU484A7G implements video scaling, color-space conversion, and overlay composition for multi-display signage and medical imaging. Its 1.11 Mbit embedded memory buffers 720p scan lines in a single device, removing external SRAM cost. The 325 user I/Os support 24-bit RGB parallel interfaces plus I2C, SPI, and HDMI bridge control. Quartus Prime IP cores for Video and Image Processing (VIP) accelerate development. The 484-FBGA package provides the BGA fanout required for high-speed parallel video buses.
추천
LED Signage and Pixel Mapping
Large-format LED walls require per-pixel color correction, gamma mapping, and brightness compensation running at high refresh rates. The 10CL040YU484A7G drives 24 parallel LED data lines at 60 Hz refresh for cabinets up to 1024 pixels per scan, using its embedded memory to store frame buffers. Its 116 multipliers handle color-space matrix operations on the fly. The automotive temperature grade supports outdoor cabinets in direct sunlight. Designers use Quartus Prime to integrate custom pixel-mapping algorithms alongside standard video inputs.
추천
Low-Cost Software-Defined Radio
The 10CL040YU484A7G implements digital down-conversion (DDC), FIR filtering, and demodulation for narrow-band SDR receivers below 50 MHz bandwidth. Its 116 18x18 multipliers run 31-tap FIR filters at 100 MSPS, sufficient for FM, DAB, and basic digital modes. The 1.11 Mbit embedded memory stores filter coefficients and signal samples. The 325 I/Os interface to ADC/DAC chips and host processors via parallel or SPI. Quartus Prime DSP Builder accelerates filter design and verification.
추천
Industrial IoT Gateways
Industrial IoT gateways aggregate sensor data from Modbus, CAN, RS-485, and Ethernet networks and pre-process it before cloud upload. The 10CL040YU484A7G runs protocol stacks concurrently — typically 4× CAN 2.0B controllers, 8× UART channels, and an embedded Nios II soft-core processor running TCP/IP — without external microcontrollers. Its 39.6K logic elements provide headroom for custom security accelerators (AES-256, SHA-256) and edge analytics. The automotive temperature grade supports outdoor and factory-floor installations.
추천
추천 제품 요약
엔지니어링 참조 데이터: 10CL040YU484A7G — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 10CL040YU484C6G | 10CL040YU484C8G | 10CL040YU484I7G | 10CL040YU484I8G |
|---|---|---|---|---|---|
| Package | 484-FBGA (UBGA, 1.0 mm pitch) | 484-UBGA - same footprint | 484-UBGA - same footprint | 484-UBGA - same footprint | 484-UBGA - same footprint |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 39,600 LE | 39,600 LE | 39,600 LE | 39,600 LE | 39,600 LE |
| Embedded Memory | 1,161,216 bits (1.11 Mbit) | 1,161,216 bits | 1,161,216 bits | 1,161,216 bits | 1,161,216 bits |
| Speed Grade | 7 (A7G) | 6 (faster) | 8 (slower) | 7 | 8 |
| Temperature Grade | -40 °C to +125 °C (automotive) | -40 °C to +125 °C (automotive) | -40 °C to +125 °C (automotive) | -40 °C to +100 °C (industrial) | -40 °C to +100 °C (industrial) |
| User I/Os | 325 | 325 | 325 | 325 | 325 |
| Embedded Multipliers (18×18) | 116 | 116 | 116 | 116 | 116 |
주요 차별점
- Automotive-grade temperature range with same 39.6K LE capacity (vs 10CL040YU484I7G)
- Higher performance than competing Spartan-6 at lower power (vs Xilinx XC6SLX45-2FGG484)
- More logic elements than lower-density Cyclone 10 LP variants (vs 10CL016YU484A7G)
설계 노트
The 484-FBGA package uses 1.0 mm ball pitch and requires 4-layer PCB fabrication with 0.5 oz copper on outer layers. Escape routing on the top layer should follow Intel's breakout guidelines: 0.127 mm trace width / 0.127 mm space, with microvia-in-pad recommended for inner-row balls. Use a daisy-chain or dog-bone fanout for outer-row balls. The thermal pad (if present on this BGA variant) should be soldered to a 10 mm × 10 mm copper pour to dissipate 1.5 W typical core power. Reference Cyclone 10 LP Hardware Reference Manual AN 738 for complete routing and stackup recommendations.
The 10CL040YU484A7G requires three main rails: VCCINT (1.0 V or 1.2 V core), VCCA (2.5 V PLL analog), and VCCIO (1.2 V to 3.3 V I/O bank, configurable per bank). Decoupling per bank: one 100 µF bulk, one 10 µF ceramic, one 1 µF ceramic, and one 0.1 µF X7R ceramic placed within 3 mm of each bank power pin. Power sequencing: VCCINT must rise before VCCA, and VCCIO must rise no later than VCCINT. Missing sequencing can cause latch-up. Estimated: core current at 70% utilization and 100 MHz toggle rate is approximately 600 mA from VCCINT per Cyclone 10 LP PowerPlay data; designers should validate with the PowerPlay Early Power Estimator (EPE) spreadsheet for their specific design.
DDR3 or LVDS interfaces running above 200 MHz require controlled-impedance traces (50 Ω single-ended, 100 Ω differential) and length matching within 25 ps. The Quartus Prime TimeQuest timing analyzer should be used to validate setup/hold margins after place-and-route. For LVDS, route differential pairs over a continuous ground plane and avoid splits or voids. Series-termination resistors (33 Ω typical) placed within 5 mm of the FPGA output buffer improve edge rates. The 484-FBGA package's 1.0 mm pitch allows direct escape routing without via stubs.
Common pitfalls when designing with the 10CL040YU484A7G include: (1) omitting the CONFIG_DONE pull-up resistor, which prevents the device from entering user mode after configuration; (2) failing to connect unused I/O bank VCCIO pins, which triggers configuration failures; (3) using a non-Cyclone 10 LP-compatible configuration flash, which causes CRC errors during AS mode boot; (4) violating the MSL3 floor-life of 168 hours after opening the moisture-sealed bag, leading to solderability defects during reflow. Always program the configuration flash via JTAG first to validate the FPGA image before committing to AS mode.
규정 준수 정보
RoHS and REACH compliant per Intel product declaration. The 'A7G' suffix denotes automotive temperature grade (-40 °C to +125 °C); AEC-Q100 qualification status should be confirmed with Intel for the specific lot date code.
