A3P030-1VQ100 - 30K Gate ProASIC3 FPGA | Microchip
부품 번호: A3P030-1VQ100 ✓ 활성A3P030-1VQ100 개요
An FPGA is a programmable logic device that allows a digital system to be configured after manufacture. Within the semiconductor hierarchy, the A3P030 belongs to the FPGA and CPLD category, combining configurable logic blocks, programmable interconnect, and user I/O in one integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can support protocol bridging, control logic, signal conditioning, and system supervision in the same design.
The ProASIC3 family emphasizes low total cost of ownership, in-system reprogrammability, small-footprint packages, and a broad selection of configuration and interface options. The A3P030 provides 231 MHz device performance, 30,000 equivalent gates, 768 configurable logic blocks, and 77 I/O in a compact 100-pin package. Its single-chip implementation reduces external component count in moderate-complexity embedded control systems.
This speed-grade-1 device is suitable for designs that require deterministic programmable logic without the cost and power of a high-end FPGA. The 1.5 V core architecture supports low-voltage digital systems, while the 77 available I/O provide connections for control signals, serial interfaces, status indication, and external data buses. Configuration storage is handled by dedicated on-chip resources within the ProASIC3 architecture.
Typical uses include industrial control and factory automation, embedded data acquisition, networking and communications equipment, instrumentation, and consumer or commercial control logic. The A3P030 is particularly suitable when a design requires flexible field updates, moderate I/O density, and compact packaging without moving to a large, expensive programmable-logic device.
Designers should verify the 1.5 V supply tolerance, confirm that all 77 I/O assignments match the target board, and validate signal levels against the selected I/O standard. Use the manufacturer pin-description table and package drawing when assigning PCB tracks, and follow the recommended power, ground, and decoupling arrangements to limit noise on this low-voltage device.
This page consolidates device specifications, package and temperature information, verified drop-in alternatives, comparison data, and practical PCB guidance into a design-focused reference for engineers evaluating the A3P030-1VQ100.
드롭인 대체품: A3P030-1VQ100 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A3P030-1VQ100 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Logic Elements, RoHS Status, Mounting Type, Configuration Memory.
A3P030-1VQG100
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3P030-VQ100
✅ 드롭인가격 문의
데이터시트 보기 →A3P030-VQG100
✅ 드롭인가격 문의
데이터시트 보기 →A3P030-VQ100I
✅ 드롭인가격 문의
데이터시트 보기 →A3P030-VQG100I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3P030-1VQ100 최대 정격 & 전기적 특성
| Device Type | Field-Programmable Gate Array (FPGA) |
| Product Family | ProASIC3 |
| Equivalent Gates | 30,000 gates |
| Logic Elements | 330 logic elements |
| Configurable Logic Blocks | 768 CLBs |
| User I/O | 77 I/O |
| Maximum Device Performance | 231 MHz |
| Core Supply Voltage | 1.5 V |
| Operating Supply Voltage Range | 1.425 V to 1.575 V |
| Speed Grade | 1 |
| 동작 온도 범위 | 0 °C to +85 °C |
| 패키지 | 100-lead VQFP, 14 x 14 mm |
| 실장 유형 | Surface Mount |
| Programmable Technology | CMOS FPGA |
| Programming Support | In-system reprogrammable ProASIC3 architecture |
| RoHS 상태 | Compliant |
| Device Pin Count | 100 pins |
A3P030-1VQ100 100-lead vqfp, 14 x 14 mm 핀 구성 가이드
A3P030-1VQ100(100-lead vqfp, 14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A3P030-1VQ100.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A3P030-1VQ100 적합 용도: 6 애플리케이션s: Industrial Automation and Factory Control, Embedded Data Acquisition Front Ends, Communication and Protocol Bridging, Programmable Instrumentation and Test Equipment, Network Interface and Packet Filtering, Low-Power Embedded Control Logic.
Industrial Automation and Factory Control
The A3P030-1VQ100 fits factory-control modules that combine deterministic logic, machine-state monitoring, and communication offload. Its 30,000 equivalent gates and 330 logic elements provide room for interlocks, sequencing, and data-path logic, while 77 I/O support encoders, limit switches, digital buses, and status outputs. The 231 MHz device performance supports clocked control logic, and the 1.5 V core supply fits compact embedded controller boards. Because the part is specified from 0 °C to +85 °C, the enclosure and thermal design must keep the device inside that range.
추천
Embedded Data Acquisition Front Ends
A3P030-1VQ100 can implement channel multiplexing, trigger conditioning, timestamp capture, and interface isolation between sensors and a host processor. The 77 I/O provide adequate connections for digital sensor channels, capture-complete signals, and peripheral buses, while the 768 configurable logic blocks accommodate moderately complex acquisition pipelines. Its 1.5 V core operation reduces supply requirements compared with many older FPGA families. Designers should assign supported I/O standards to external signals and keep high-speed data routes short and properly terminated on the PCB.
추천
Communication and Protocol Bridging
The A3P030-1VQ100 is appropriate for protocol conversion, framing, filtering, and message-routing logic between legacy and modern serial interfaces. Its programmable interconnect supports designs that need parallel-to-serial conversion, clock-domain isolation, FIFOs, or test-point insertion without implementing these functions in discrete logic. The 30K-gate capacity and 231 MHz performance provide useful headroom for multi-lane bridging. The 77 I/O can accommodate interface data, control, and ready signals, although each external interface must be mapped against the manufacturer pin table before release.
추천
Programmable Instrumentation and Test Equipment
A3P030-1VQ100 can serve as the timing, sequencing, and pattern-control engine in programmable test and measurement equipment. Its 330 logic elements and 77 I/O are well suited to generating stimulus sequences, coordinating measurement instruments, and implementing status machines. A 231 MHz device rate supports demanding clocked logic, while in-system programmability allows product behavior to be updated without a board respin. Designers should keep configuration and debug functions accessible during production test and separate sensitive analog routing from high-speed digital paths.
추천
Network Interface and Packet Filtering
The A3P030-1VQ100 can implement packet filtering, header inspection, traffic classification, and low-rate line-interface functions. Its programmable logic allows protocol-specific fields to be changed in the field, while 77 I/O offer access to packet buses, status flags, and management signals. The device is most appropriate for moderate throughput designs that do not require the resources of a large network FPGA. Care should be taken to constrain clock domains, use supported I/O standards, and verify timing closure for every packet-processing path after synthesis.
추천
Low-Power Embedded Control Logic
A3P030-1VQ100 works well as an auxiliary logic engine beside a microcontroller in energy-conscious embedded products. It can handle state-machine sequencing, display control, power sequencing, and peripheral arbitration while its 1.5 V core supply operates from a 1.425 V to 1.575 V range. The 100-lead VQFP is practical for boards that already use fine-pitch leaded packages, and 77 I/O leaves room for mixed control and data signals. Because the target is a commercial 0 °C to +85 °C variant, applications with wider environmental requirements should review the industrial suffix.
추천
추천 제품 요약
엔지니어링 참조 데이터: A3P030-1VQ100 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A3P030-1VQG100 | A3P030-VQ100 | A3P030-VQG100 | A3P030-VQ100I | A3P030-VQG100I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-lead VQFP, 14 x 14 mm | 100-lead VQFP, 14 x 14 mm | 100-lead VQFP, 14 x 14 mm | 100-lead VQFP, 14 x 14 mm | 100-lead VQFP, 14 x 14 mm | 100-lead VQFP, 14 x 14 mm |
주요 차별점
- Documented speed-grade-1 commercial ordering option (vs A3P030-VQ100)
- Compact 100-lead VQFP implementation (vs A3P030-VQG100)
- Industrial-grade family alternative available (vs A3P030-VQ100I)
설계 노트
Route the 1.5 V core supply through a low-impedance plane with the shortest practical connection to the FPGA power pins. Place the required bulk and high-frequency decoupling capacitors at the associated supply and ground pins, using the values and placement shown in the manufacturer hardware guidance. Keep unrelated analog and switching-converter return currents from flowing through the digital ground path under the FPGA.
Assign every VQFP lead from the manufacturer pin-description table, including power, configuration, clock, and programming functions. Preserve access to configuration and programming signals for production programming and field updates. Use a fine-pitch assembly process capable of handling the 100-lead VQFP footprint, and inspect solder joints under magnification because short bridges between closely spaced leads are difficult to correct after board fabrication.
Constrain high-speed clock and data paths, provide a continuous return path beneath each routed signal, and avoid crossings between unrelated clock domains. Apply the supported I/O standard and drive strength only after reviewing the external device voltage levels. For external interfaces, keep connector and protection-device stubs short, and validate the final timing and signal-integrity behavior with the actual board layout.
Do not treat the closely related VQ, VQG, I, and 1 ordering codes as automatically equivalent. Speed grade, temperature grade, and packaging details can change between suffixes even when the device family and land pattern remain the same. Check the pin table, core-voltage requirement, operating-temperature range, configuration method, and timing targets for every proposed substitution before releasing a PCB order.
규정 준수 정보
RoHS compliance is identified for A3P030-1VQ100. The commercial A3P030-1VQ100 is not presented as an automotive-qualified ordering option; use the manufacturer ordering guide to confirm the exact environmental and qualification requirements.