Microchip Technology

A3P400-1FG144 - 400K-Gate ProASIC3 FPGA | Microchip

부품 번호: A3P400-1FG144 ✓ 활성
144-FPBGA, 13 mm x 13 mm Package Grade 1 Speed Flash, nonvolatile Memory
MOQ: 1 |

A3P400-1FG144 개요

Microchip Technology A3P400-1FG144 is a ProASIC3 flash-based field-programmable gate array with 400,000 system gates, 5,120 logic elements, 97 user I/Os, and 54 Kb of block RAM in a 144-ball FBGA package. The device uses a 130 nm flash-based CMOS process and supports live configuration at power-up, allowing the FPGA to operate without an external configuration controller after programming.

An FPGA is a programmable semiconductor whose logic, routing, memory, and I/O resources can be configured after manufacture to implement digital systems. Within the product hierarchy, the A3P400 is a low-density FPGA, a programmable-logic device within the broader semiconductor category. Its nonvolatile flash configuration retains the programmed design when power is removed, making it suitable for control, interface, data acquisition, and embedded system functions.

The ProASIC3 family combines reprogrammability with dedicated block RAM and configurable I/O. The A3P400-1FG144 provides 300 user I/Os at the family level, up to 144 Kbits of true dual-port SRAM, and up to 1 M system gates across the ProASIC3 family. Device-specific features include four I/O banks, allowing compatible voltage standards to be assigned within the appropriate supply domains. Speed grade 1 and commercial temperature options support cost-sensitive designs requiring broad operating conditions.

Its 130 nm, seven-layer-metal flash-based CMOS process provides nonvolatile configuration and live-at-power-up operation. The architecture supports 54 Kb of block RAM for buffering, packet handling, control state, and general-purpose storage. Four I/O banks provide dedicated supply structures, so assignments must respect the voltage capabilities of each bank when planning board-level interfaces.

Typical uses include industrial control, communications gateways, instrumentation, security and access systems, embedded processors, and compact data-acquisition equipment. The 144-ball FBGA package minimizes board area but requires careful escape routing, multilayer PCB construction, controlled impedance, and thermal-aware placement. The FPGA should be paired with correctly rated clock, configuration, memory, and power-supply components appropriate to the selected design.

For layout, reserve the manufacturer-specified configuration pins and program the correct I/O standards before signal routing is frozen. Decoupling should follow the device power and ground recommendations, while high-speed clock and serial interfaces require short return paths. Before production, verify timing, pin assignments, power sequencing, and junction-temperature margins in the final board environment.

This product guide combines the device architecture, commercial sourcing information, same-package alternatives, and practical FPGA design guidance. It helps engineers identify the correct ProASIC3 option and plan a robust PCB, power architecture, and configuration flow before releasing a design to manufacturing.

드롭인 대체품: A3P400-1FG144 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: A3P400-1FG144 (동일 폼 팩터 및 풋프린트) — 차이점: Configuration Memory, Package, Device Type, Process Technology, Mounting Type.

Microchip Technology
Configuration Memory: Reprogrammable flash
Package: 144-LBGA (144-FPBGA)
Device Type: ProASIC3 Flash FPGA
비교 대상: A3P400-1FG144 →
Microchip Technology
Configuration Memory: On-chip non-volatile flash, single-chip solution
Package: FG144, 144-ball plastic BGA (FBGA), 17 x 17 mm, 1.0 mm pitch
Device Type: ProASIC3 Flash Field-Programmable Gate Array (FPGA)
비교 대상: A3P400-1FG144 →
Microchip Technology
Configuration Memory: Embedded nonvolatile flash
Package: 144-LBGA, 13 mm x 13 mm
Mounting Type: Surface mount
비교 대상: A3P400-1FG144 →

A3P400-FG144

✅ 드롭인
Microchip Technology
📦 144-FPBGA
ProASIC3 Flash Field-Programmable Gate Array (FPGA) · 55,296 · 1 M · 144 kbits · 300 · 97 · FG144, 144-ball plastic BGA (FBGA), 17 x 17 mm, 1.0 mm pitch · 144

가격 문의

데이터시트 보기 →

A3P400-1FG144I

✅ 드롭인
📦 144-FPBGA
Same A3P400 device, grade 1 speed, and 144-ball package; temperature ordering differs, with the I variant specified at 0°C to 70°C junction rather than 0°C to 85°C.

📋 참조 대체품 (카탈로그에 없음)

A3P400-2FG144

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 144-FPBGA
ProASIC3 Flash FPGA · 55,296 cells · 97 I/O · 54 Kb · 1.5 V · -2 · 130 nm CMOS · 7 layers with 6 copper layers

가격 문의

데이터시트 보기 →

A3P400-2FG144I

✅ 드롭인 ⚠️ 사양 미검증
📦 144-FPBGA
Same A3P400 core and 144-ball footprint; speed designation changes from grade 1 to grade 2 and the I suffix denotes the industrial-temperature ordering option.

📋 참조 대체품 (카탈로그에 없음)

A3P400-1FG144

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 144-FPBGA
ProASIC3 flash-based FPGA · 400,000 gates · 5,120 logic elements · 97 I/Os · 54 Kb · 1 M system gates · 144 Kbits · 300 I/Os

가격 문의

데이터시트 보기 →

A3P400-1FG144 최대 정격 & 전기적 특성

Device Type ProASIC3 flash-based FPGA
System Gates 400,000 gates
Logic Elements 5,120 logic elements
User I/O 97 I/Os
Block RAM 54 Kb
Family Maximum System Gates 1 M system gates
Family Maximum True Dual-Port SRAM 144 Kbits
Family Maximum User I/O 300 I/Os
Configuration Memory Flash, nonvolatile
Process Technology 130 nm flash-based CMOS
Metal Layers 7 layers, 6 copper layers
Configuration Feature Live at Power-Up (LAPU)
I/O Banks 4 banks
패키지 144-FPBGA, 13 mm x 13 mm
Ball Pitch 1.0 mm
Speed Grade Grade 1
Temperature Grade Commercial, 0°C to 85°C junction
Single-Chip Configuration Support Supported

A3P400-1FG144 144-fpbga, 13 mm x 13 mm 핀 구성 가이드

A3P400-1FG144(144-fpbga, 13 mm x 13 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

A3P400-1FG144의 144-fpbga, 13 mm x 13 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: A3P400-1FG144.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

A3P400-1FG144 적합 용도: 6 애플리케이션s: Industrial Control Systems, Communications Gateways, Data Acquisition and Instrumentation, Security and Access Systems, Embedded Processor Support, Networking and Storage Controllers.

🏭

Industrial Control Systems

The A3P400-1FG144 suits compact industrial controllers that require nonvolatile logic, configurable I/O, and modest local data buffering. Its 400,000 system gates and 5,120 logic elements can host control functions, state machines, communication interfaces, and supervisory logic, while 54 Kb of block RAM supports packet staging and local data buffers. Live at Power-Up can reduce the need for a separate configuration controller after programming. Four I/O banks allow interfaces to be grouped according to compatible voltage standards, provided each bank receives the supply required by its assigned signals.

🌐

Communications Gateways

A3P400-1FG144 can implement protocol conversion, framing, routing, and status control in compact communications gateways. The 97 user I/Os provide connections for serial links, control signals, indicators, and service interfaces, while 54 Kb of block RAM is useful for buffering frames or maintaining protocol state. Nonvolatile flash configuration preserves the gateway logic through power cycles, and Live at Power-Up supports autonomous startup. Because the device has four I/O banks, engineers should assign each interface voltage standard only to a bank whose supply and signal limits match.

🔧

Data Acquisition and Instrumentation

The A3P400-1FG144 is appropriate for data-acquisition front ends requiring deterministic sampling control, digital filtering, status logging, and interface management. Its programmable logic can coordinate converters and switches, while 54 Kb of block RAM can hold acquisition batches or intermediate results. The 130 nm flash-based architecture retains configuration without volatile SRAM initialization, improving operational repeatability. A practical design should separate sensitive analog functions from the FPGA, use short grounded paths for digital interfaces, and confirm timing margin at the selected clock and I/O standards.

🛡️

Security and Access Systems

A3P400-1FG144 can implement credential parsing, access decisions, event buffering, alarm logic, and communication control in compact access-control terminals. Its 400,000 system gates and 5,120 logic elements support parallel control functions, while 97 I/Os accommodate readers, indicators, relays, and supervisory interfaces. Flash-based configuration ensures the programmed authorization and control logic remains available after power loss. For security-sensitive installations, validate all external interfaces, protect configuration access according to Microchip guidance, and do not treat programmable logic as a substitute for dedicated cryptographic hardware.

🖥️

Embedded Processor Support

The A3P400-1FG144 can act as a programmable logic companion to a microprocessor or microcontroller by handling deterministic peripherals, bus decoding, timers, state machines, or specialized datapaths. Its 54 Kb of block RAM provides local working memory without occupying the host processor’s main memory, and its 97 user I/Os support multiple peripheral buses. Live at Power-Up allows the FPGA section to become operational quickly after power restoration. System partitioning should define clear ownership of buses and interrupts to prevent contention between hard processors and programmable logic.

🖥️

Networking and Storage Controllers

A3P400-1FG144 is well suited to small protocol engines, storage-control front ends, and interface-format converters where programmable logic must operate independently after power-up. The 400,000-gate architecture can implement parallel datapaths, while block RAM supports descriptors, command queues, and packet buffering. The 97 I/Os can connect storage-control signals, status LEDs, and management interfaces. Designers should use short, impedance-controlled routes for high-speed links, observe recommended bank supplies, and include configuration and recovery paths so an FPGA fault does not compromise system integrity.

What is the A3P400-1FG144?
The A3P400-1FG144 is a Microchip ProASIC3 flash-based FPGA with 400,000 system gates, 5,120 logic elements, 97 user I/Os, and 54 Kb of block RAM. According to the Microchip A3P400 product page, ProASIC3 devices provide reprogrammability and live-at-power-up operation in small-footprint packages. This particular ordering code uses the 144-ball FBGA package, grade 1 speed, and commercial temperature range.
What are the key specifications of A3P400-1FG144 that engineers should know?
The A3P400-1FG144 combines 400,000 system gates, 5,120 logic elements, 54 Kb of block RAM, and 97 user I/Os in a 144-ball FBGA package. Its architecture uses a 130 nm flash-based CMOS process with seven metal layers, including six copper layers. The device also provides four I/O banks and supports single-chip configuration and Live at Power-Up, making it useful for compact, nonvolatile programmable-logic designs.
Where can I download the A3P400-1FG144 datasheet PDF?
The official A3P400 product page provides the manufacturer documentation and family-level technical information for the A3P400-1FG144. Use the pin-assignment table and electrical characteristics in the ProASIC3 Flash Family FPGAs datasheet when assigning balls, selecting I/O standards, and defining power rails. The manufacturer product page at https://www.microchip.com/en-us/product/A3P400 is the appropriate starting point for an authoritative PDF and related design documents.
Where can I find the A3P400-1FG144 pinout?
The A3P400-1FG144 pin assignments are published in the package pin-assignment section of the ProASIC3 family datasheet. The device is supplied in a 144-ball FBGA package measuring 13 mm by 13 mm with 1.0 mm ball pitch. Use the package drawing and pin-description tables for board layout, and verify every configuration, supply, clock, and user-I/O ball against the selected device variant before fabrication.
Can the A3P400-1FG144 operate without an external configuration controller?
Yes, the A3P400-1FG144 supports Live at Power-Up, allowing a programmed flash configuration to operate the device without a separate external configuration controller after power is applied. According to the A3P400 family description, its configuration is stored in flash and remains nonvolatile when power is removed. This supports single-chip implementations and simplifies board-level boot behavior for embedded and industrial control systems.
How much block RAM and user I/O does the A3P400-1FG144 provide?
The A3P400-1FG144 provides 54 Kb of block RAM and 97 user I/Os. Its broader ProASIC3 family can reach 144 Kbits of true dual-port SRAM and 300 user I/Os, depending on the selected device and package. The A3P400 also has four I/O banks, so each interface must use a voltage standard compatible with the supply assigned to its bank.
What is the difference between A3P400-1FG144 and A3P400-FG144?
The A3P400-FG144 omits the explicit speed-grade 1 designation used by the A3P400-1FG144, while retaining the A3P400 device and 144-ball FG144 package. Both retain the same core architecture, 400,000 system gates, 5,120 logic elements, 54 Kb of block RAM, and nonvolatile flash configuration. Timing and ordering requirements should be checked against the manufacturer ordering guide before treating either grade as interchangeable.
When should I choose A3P400-1FG144 over A3P400-FG144?
Choose the A3P400-1FG144 when a design specifically calls for the ProASIC3 grade 1 device in the 144-ball FG144 package. Choose A3P400-FG144 only after confirming that its unspecified speed designation still satisfies the design’s timing requirements and procurement specification. Because the suffix encodes a meaningful ordering option, the safest replacement decision compares the complete manufacturer ordering information rather than the package name alone.
What can replace the A3P400-1FG144?
The closest same-package replacements are other A3P400 ordering options in the 144-ball FG144 package, including A3P400-FG144 and A3P400-1FG144I. The unsuffixed A3P400-FG144 changes the speed-grade designation, while the industrial-temperature A3P400-1FG144I expands the junction-temperature range from 0°C to 85°C to 0°C to 70°C according to its published ordering information. Confirm timing, temperature grade, and programming support before substitution.
Is A3P400-1FG144 the same as A3P400-1FG144I?
No, the A3P400-1FG144 and A3P400-1FG144I share the ProASIC3 A3P400 architecture and 144-ball FG144 footprint but carry different ordering suffixes. The A3P400-1FG144 is identified as commercial, with a 0°C to 85°C junction range, while the A3P400-1FG144I is identified as industrial, with a 0°C to 70°C junction range. Their electrical and timing compatibility should be confirmed in the family documentation.
Is there a Microchip equivalent for the A3P400-1FG144?
The nearest Microchip ordering option is the A3P400-FG144, which retains the A3P400 device and 144-ball package while changing the speed-grade field in the MPN. For designs requiring a different temperature grade, the A3P400-1FG144I is another same-family option. No verified cross-manufacturer, pin-compatible alternative was identified for the exact 144-ball ProASIC3 footprint, so use the family ordering table for an authorized migration.
What is the best drop-in replacement for A3P400-1FG144?
A3P400-FG144 is the closest same-package drop-in candidate because it retains the A3P400 device and 144-ball FG144 footprint, with the principal difference being the omitted grade 1 speed designation. A3P400-1FG144I offers the same family and package but changes the temperature ordering option. Verify timing closure, I/O assignments, power requirements, and software-device support before approving either substitution.
Where can I buy A3P400-1FG144 and check the current lead time?
Use the Request a Quote form on this page to request current availability, lead time, and commercial terms for the A3P400-1FG144. The device is listed as a ProASIC3 FPGA in a 144-LBGA package, but inventory and delivery schedules can change independently of the product page. Provide the exact MPN, target quantity, and required shipping destination with the request for the most useful response.
What is the current price of A3P400-1FG144?
The current commercial price for A3P400-1FG144 should be obtained through the Request a Quote form on this page. Quote-based ordering accommodates quantity, delivery schedule, and supply requirements without embedding a potentially stale price in technical content. Submit the exact MPN, package configuration, order quantity, and destination so the commercial team can return current pricing and lead-time information.
Is A3P400-1FG144 in stock?
Current inventory for A3P400-1FG144 should be confirmed through the Request a Quote form on this page. Because FPGA stock varies by package suffix, speed grade, quantity, and date, a distributor listing does not by itself establish a guaranteed stock position. State the required quantity and target delivery date with the request, and the commercial team can confirm the closest available supply.
How should power and I/O banks be planned for A3P400-1FG144?
Plan the A3P400-1FG144 around its four I/O banks and their dedicated supply domains. According to Microchip’s A3P1000-to-A3P400 migration guidance, only I/Os with compatible voltage standards may be assigned to the same bank. Apply the family datasheet’s voltage, decoupling, sequencing, and absolute-maximum requirements, then verify every external interface against the assigned bank supply in the final schematic.

엔지니어링 참조 데이터: A3P400-1FG144 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the A3P400-1FG144 when the procurement specification calls for a grade 1, commercial-temperature ProASIC3 device in the 144-ball FGGA package and the design can use 400,000 system gates, 5,120 logic elements, 54 Kb of block RAM, and 97 user I/Os. A3P400-FG144 is the closest ordering candidate when grade 1 is not explicitly required, although its speed field must be confirmed. Use A3P400-1FG144I only when the industrial ordering designation is acceptable and its 0°C to 70°C junction range covers the design. A3P400-2FG144 and A3P400-2FG144I preserve the footprint and core resources but use grade 2, so timing closure must be reconfirmed. No verified cross-manufacturer pin-compatible replacement was identified; approve a cross-brand migration only after a device-level footprint, timing, power, configuration, and software review.

대체품과의 비교

파라미터 이 제품 A3P400-FG144 A3P400-1FG144I A3P400-2FG144 A3P400-2FG144I
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-FPBGA 144-FPBGA - same package 144-FPBGA - same package 144-FPBGA - same package 144-FPBGA - same package
Device Family ProASIC3 ProASIC3 ProASIC3 ProASIC3 ProASIC3
System Gates 400,000 gates 400,000 gates 400,000 gates 400,000 gates 400,000 gates
Logic Elements 5,120 logic elements 5,120 logic elements 5,120 logic elements 5,120 logic elements 5,120 logic elements
Block RAM 54 Kb 54 Kb 54 Kb 54 Kb 54 Kb
User I/O 97 I/Os 97 I/Os 97 I/Os 97 I/Os 97 I/Os
Speed Grade Grade 1 Not specified by ordering code Grade 1 Grade 2 Grade 2
Configuration Memory Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash Nonvolatile flash

주요 차별점

  • Grade 1 speed designation is explicit (vs A3P400-FG144)
  • Commercial junction-temperature range (vs A3P400-1FG144I)
  • Compact nonvolatile programmable logic (vs A3P400-2FG144)

설계 노트

Plan the 144-FPBGA with the manufacturer’s package drawing and pin-assignment table as the controlling documents. With 1.0 mm ball pitch and a 13 mm by 13 mm body, the device is suitable for dense multilayer routing, but every escape trace, via, and BGA-to-via land must follow the qualified footprint. Keep configuration and dedicated supply pins accessible, preserve clearance around exposed thermal requirements, and validate the complete stack-up with the assembly house.

Assign compatible interface standards within the A3P400’s four I/O banks and provide each bank with the voltage required by its assigned signals. Follow the family datasheet for core, configuration, and I/O supply sequencing, decoupling, and current limits. Separate sensitive input references from switching supplies where possible, and verify power-up, power-down, and brownout behavior in the complete system rather than relying on nominal rail values.

Route clocks and high-speed interfaces over continuous reference planes with short return paths and no plane transitions where avoidable. Apply the pin-sheet input-buffer and output-driver rules when assigning standards, and keep configuration activity away from timing-critical regions. After schematic capture, run static timing analysis at the actual clock target and include board skew, connector loss, and external transceiver delay in the timing budget.

Do not treat a shared package suffix as proof of drop-in equivalence. The speed grade, temperature grade, device identifier, configuration data, and software support all matter for ProASIC3 substitutions. When comparing A3P400-1FG144 with A3P400-FG144 or an I or grade 2 variant, confirm the ordering guide, recreate the bitstream for the exact device, run boundary tests, and confirm that the new part meets timing and temperature requirements.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product information. The A3P400-1FG144 is identified as a commercial-temperature ProASIC3 FPGA; use the ordering and compliance documentation for the exact assembled part.

데이터 검증일: 2026-11-08 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

A3P400-1FG144 A3P400-1FG144 datasheet A3P400-1FG144 datasheet pdf A3P400-1FG144 pinout A3P400-1FG144 equivalent A3P400-1FG144 replacement A3P400-1FG144 cross reference A3P400-1FG144 vs A3P400-FG144 A3P400-1FG144 price A3P400-1FG144 stock Microchip A3P400-1FG144 A3P400 144 FBGA FPGA A3P400-1FG144 application circuit A3P400-1FG144 footprint

관련 부품 & 용어

Microchip Technology A3P400-1FG144 A3P400-FG144 A3P400-1FG144I A3P400-2FG144 A3P400-2FG144I ProASIC3 FPGA field-programmable gate array programmable-logic device semiconductor flash-based CMOS 130 nm process nonvolatile flash configuration Live at Power-Up LAPU single-chip configuration block RAM true dual-port SRAM 400,000 system gates 5,120 logic elements 97 user I/Os four I/O banks 144-FPBGA 1.0 mm ball pitch FPGA Market ProASIC3 Flash Family FPGAs
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기