A42MX16-PQG208A - 24K Gate FPGA, 140 I/O, 208-PQFP | Microchip
부품 번호: A42MX16-PQG208A ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $208.73 | $208.73 |
| 10 | $198.29 | $1,982.90 |
| 25 | $188.06 | $4,701.50 |
| 100 | $178.44 | $17,844.00 |
| 500 | $169.3 | $84,650.00 |
| 1,000 | $160.7 | $160,700.00 |
A42MX16-PQG208A 개요
A Field Programmable Gate Array (FPGA) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that designers configure in the field, offering an alternative to ASICs and a consolidation path for legacy PLDs, PALs, and GALs. Within the programmable logic hierarchy, the MX family sits as a high-volume, low-cost, single-chip ASIC replacement platform.
Key features include a flexible 5.0V-tolerant architecture, JTAG boundary scan testing per IEEE 1149.1 on higher-density family members, an operating temperature range of -40C to +125C (TA) for industrial environments, and surface-mount assembly compatible with standard PQFP reflow processes. The A42MX16 die supports a maximum toggle rate in the ~100 MHz class depending on speed grade and routing.
Architecturally, the device combines combinatorial and sequential logic modules with distributed routing resources, providing predictable delays suitable for glue logic integration, bus interfacing, state machines, and control-plane functions. The combinatorial delay of the base family is in the low-nanosecond range, enabling multi-megahertz system clocking.
Typical applications include industrial control, legacy PLD consolidation, military/industrial upgrade programs, communications interface bridging, and high-volume products seeking an ASIC alternative without NRE cost.
Design consideration: the dual-rail supply (3.3V core, 5V I/O) requires independent regulated rails and correct power sequencing per the 40MX/42MX datasheet; verify speed grade and temperature suffix before production ordering.
드롭인 대체품: A42MX16-PQG208A — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A42MX16-PQG208A (동일 폼 팩터 및 풋프린트) — 차이점: Package, System Gates, Logic Cells, RoHS Status, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A42MX16-1PQG208I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$299.95 / 개
데이터시트 보기 →A42MX24-1PQG208I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →A42MX24-1PQG208M
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$43.2 / 개
데이터시트 보기 →A42MX36-1PQG208
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$45.3 / 개
데이터시트 보기 →A42MX36-PQG208I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$55 / 개
데이터시트 보기 →A42MX24-3PQG208I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1 / 개
데이터시트 보기 →A42MX16-PQG208A 최대 정격 & 전기적 특성
| Family | MX FPGA (42MX) |
| System Gates | 24000 |
| Logic Cells | 1232 |
| CLBs | 608 |
| Number of I/O | 140 |
| Supply Voltage (Core) | 3 V to 3.6 V |
| Supply Voltage (I/O) | 4.5 V to 5.5 V |
| 동작 온도 | -40C to +125C (TA) |
| 패키지 | 208-BFQFP (PQFP, 28x28 mm) |
| 실장 유형 | Surface Mount |
| Process Technology | 0.45 um CMOS |
| Packaging | Tray |
| RoHS 상태 | ROHS3 Compliant |
| Manufacturer Lead Time | 12 weeks |
| Product Status | Active |
| JTAG Boundary Scan | IEEE 1149.1 (see datasheet for device applicability) |
A42MX16-PQG208A 208-bfqfp (pqfp, 28x28 mm) 핀 구성 가이드
A42MX16-PQG208A(208-bfqfp (pqfp, 28x28 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A42MX16-PQG208A.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A42MX16-PQG208A 적합 용도: 6 애플리케이션s: Legacy PLD Consolidation, Industrial Control and Automation, ASIC Prototyping and Low-Volume ASIC Replacement, Communications Interface Bridging, Military and Aerospace Upgrade Programs, Test and Measurement Equipment.
Legacy PLD Consolidation
The MX family was explicitly designed by Microchip (Microsemi) to consolidate legacy PLDs, PALs, and GALs into a single low-cost device. With 24K gates and 140 I/O, the A42MX16-PQG208A can absorb dozens of 22V10-class parts, cutting BOM count, board area, and assembly cost. Its 5.0V-tolerant I/O rail (4.5V to 5.5V supply) connects directly to legacy TTL/5V CMOS logic without level shifting, a key advantage over modern 3.3V-only FPGAs. The 0.45um process yields a stable, proven platform for long-lifecycle industrial builds.
추천
Industrial Control and Automation
In factory automation and industrial control, the A42MX16-PQG208A implements state machines, sensor interface glue logic, and bus arbitration with an operating range of -40C to +125C, covering harsh cabinet environments. The 140 user I/O handle parallel sensor arrays, relay drivers, and 5V PLC backplane signals directly, since the I/O rail operates at 4.5V to 5.5V. Designers place it between a microcontroller and field wiring to offload timing-critical sequencing; its deterministic CLB fabric avoids software latency. ROHS3 compliance keeps it valid in current industrial builds.
추천
ASIC Prototyping and Low-Volume ASIC Replacement
Microchip positions MX FPGAs as a reliable, single-chip ASIC alternative with no NRE cost, ideal for prototyping gate-array designs and for low-to-mid volume production where a mask ASIC cannot be justified. The A42MX16 die with 24,000 gates and 1232 logic cells accommodates mid-size control and datapath designs, while the 208-pin PQFP provides 140 I/O for wide data buses. Unlike SRAM FPGAs, the antifuse-class MX programming approach retains configuration at power-up without an external boot flash, simplifying BOM and improving startup determinism.
추천
Communications Interface Bridging
The device suits legacy communications equipment - protocol converters, backplane bridges, and line-card glue logic - where 5V signaling remains standard. With 140 user I/O and ~100 MHz-class family toggle capability (speed-grade dependent), it implements UART/SPI extensions, parallel bus translation, and framing logic. The dual-rail supply (3.3V core, 5V I/O) lets designers interface modern 3.3V controllers to 5V line interfaces in one device, eliminating discrete level translators. JTAG support on MX family devices aids board-level test per IEEE 1149.1 where applicable.
추천
Military and Aerospace Upgrade Programs
The 42MX family with 'M' suffix variants (e.g., A42MX24-1PQG208M) serves military platform upgrades where long availability and proven 0.45um CMOS matter more than cutting-edge density. The A42MX16-PQG208A footprint is shared across the family, letting maintenance programs scale density from 24K to 36K gates without PCB respin. Its -40C to +125C rating and tray packaging support high-reliability builds. Program managers value the stable, non-EOL-prone legacy roadmap that Microchip maintains for MX FPGA products.
추천
Test and Measurement Equipment
Bench and automated test equipment frequently needs custom timing, muxing, and trigger logic alongside 5V legacy instruments. The A42MX16-PQG208A implements scan controllers, trigger fan-out, and parallel handshaking with its 140 I/O directly compatible with 5V TTL instrument buses (I/O supply 4.5V to 5.5V). Deterministic CLB delays simplify setup/hold analysis against instrument timing budgets. Its active lifecycle status and 12-week lead time make it practical for equipment OEMs running long production programs with periodic reorders.
추천
추천 제품 요약
엔지니어링 참조 데이터: A42MX16-PQG208A — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A42MX16-1PQG208I | A42MX24-1PQG208I | A42MX36-1PQG208 | A42MX36-PQG208I |
|---|---|---|---|---|---|
| Package | 208-BFQFP (PQFP, 28x28 mm) | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 24,000 | 24,000 | 36,000 (42MX24 class) | 54,000 (42MX36 class) | 54,000 (42MX36 class) |
| Supply Voltage | 3-3.6V core / 4.5-5.5V I/O | 3-3.6V / 4.5-5.5V | 3-3.6V / 4.5-5.5V | 3-3.6V / 4.5-5.5V | 3-3.6V / 4.5-5.5V |
| Lifecycle Status | Active | Active | Active | Active | Active |
주요 차별점
- Native 5V I/O operation (vs A42MX16-1PQG208I)
- Lowest density/cost 208-PQFP MX option (vs A42MX24-1PQG208I)
- Headroom for growth without respin (vs A42MX36-1PQG208)
설계 노트
The A42MX16-PQG208A requires two independent rails: 3.0-3.6V core and 4.5-5.5V I/O. Use a 3.3V LDO or buck for the core rail and a clean 5V rail for I/O banks. Add 0.1uF ceramic decoupling at every VCC/VCCI pin pair plus bulk 10uF per rail. Follow power-up guidance in the 40MX/42MX datasheet (DS2316) to avoid latch-up during ramp sequencing.
The 208-PQFP has a 0.5mm pin pitch and 28x28 mm body. Use a standard PQFP-208 land pattern with solder paste on all pads; the exposed center area may carry a grounded thermal relief pad per package drawing. Route 5V I/O traces with adequate spacing from 3.3V core-domain signals, and keep configuration/JTAG pins with series termination near the header.
Do not mix speed grades without re-closing timing: the PQG208A 'A' grade and -1/-3 grades have different delay tables in the datasheet. Also confirm the temperature suffix (commercial vs industrial I vs military M) matches your program requirements, since design sign-off on one grade does not guarantee timing at another. Package is tray, not reel - plan for manual or tray-fed assembly.
규정 준수 정보
ROHS3 Compliant per Microchip USA and DigiKey listings. Lead-free per PCB Electronics listing.