A54SX08-PLG84 - 8K Gate SX FPGA, 84-PLCC | Microsemi
부품 번호: A54SX08-PLG84 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
A54SX08-PLG84 개요
An FPGA (field programmable gate array) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable fabric, allowing designers to implement custom digital circuits after manufacturing. Within the programmable logic hierarchy, the A54SX08 belongs to the Actel/Microsemi SX family of antifuse FPGAs - one-time-programmable (OTP) devices positioned below flash-based and SRAM-based FPGAs in system architecture. Antifuse programming gives the SX family inherent resistance to configuration bitstream readback, a key security and reliability trait in defense and industrial designs.
Key features include 8K equivalent system gates, 512 programmable cells organized into Cluster and FastConnect routing structures, 240 MHz maximum toggle performance on a 0.35 um CMOS process, and dual 3.3V/5V tolerant I/O operation. The 84-lead PLCC package uses a 1.27 mm pin pitch with J-bend terminations, offering a robust, reworkable surface-mount footprint popular in legacy board designs and space-constrained industrial assemblies.
Technically, the SX architecture combines C-cell (combinational) and R-cell (register) modules with dedicated flip-flops, delivering fast pin-to-pin timing that simplifies system interface design and supports parallel board-level development. The antifuse interconnect adds less parasitic capacitance than SRAM switches, contributing to the family's speed and low dynamic power.
Typical applications include glue logic consolidation, industrial control, military/aerospace subsystems, communications line cards, and legacy board sparing - anywhere a small, secure, one-time-programmable FPGA in a through-hole-rework-friendly PLCC is required.
Design consideration: because antifuse FPGAs are OTP, verify your netlist thoroughly in simulation and via the Libero/Designer tools flow before programming; there is no in-system reconfiguration as with SRAM FPGAs.
This page synthesizes distributor pricing availability, drop-in speed-grade alternatives, and practical sourcing guidance not found in the manufacturer datasheet.
드롭인 대체품: A54SX08-PLG84 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A54SX08-PLG84 (동일 폼 팩터 및 풋프린트) — 차이점: Process Technology, Logic Cells, Package / Case, Supplier Device Package, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A54SX08-PLG84I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX08-2PLG84
✅ 드롭인✓ 재고 있음
$20.4 / 개
데이터시트 보기 →A54SX08-2PLG84I
✅ 드롭인✓ 재고 있음
$17.1 / 개
데이터시트 보기 →A54SX08-P2PLG84I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A54SX08-1PLG84I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A54SX08-PLG84 최대 정격 & 전기적 특성
| Family | SX (Actel/Microsemi antifuse FPGA) |
| Equivalent System Gates | 8000 gates |
| Logic Cells | 512 cells |
| Number of I/O | 69 |
| Maximum Frequency | 240 MHz |
| Process Technology | 0.35 um CMOS |
| 공급 전압 | 3.3 V / 5 V |
| Programming Technology | Antifuse (one-time programmable) |
| 패키지 | 84-LCC (J-Lead) PLCC |
| Pin Pitch | 1.27 mm |
| 실장 유형 | Surface Mount |
| Total Gates of CLBs | 768 CLBs (per A54SX08 series data) |
A54SX08-PLG84 84-lcc (j-lead) plcc 핀 구성 가이드
A54SX08-PLG84(84-lcc (j-lead) plcc 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A54SX08-PLG84.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A54SX08-PLG84 적합 용도: 6 애플리케이션s: Glue Logic Consolidation, Industrial Control Systems, Military and Defense Subsystems, Communications Line Cards, Legacy Board Spares and Obsolescence Management, Test and Measurement Equipment.
Glue Logic Consolidation
The A54SX08-PLG84 excels at replacing dozens of 74-series TTL/CMOS chips with a single 8K-gate antifuse FPGA. Its 69 user I/O and fast, deterministic pin-to-pin timing (240 MHz class) let designers merge address decoders, bus transceivers, state machines, and interrupt controllers into one device, cutting board area and BOM count. Because the antifuse fabric is programmed once, the consolidated logic behaves like an ASIC on power-up with no configuration controller or boot flash required - a decisive advantage over SRAM FPGAs in cost-sensitive legacy boards. The 84-PLCC package also suits older two-sided PCB layouts that cannot accommodate fine-pitch BGAs.
추천
Industrial Control Systems
In PLC I/O modules, motor-control interfaces, and factory automation backplanes, the A54SX08-PLG84 provides deterministic, instantly-ready logic at 3.3V/5V levels - directly compatible with legacy 5V industrial buses without level shifters. The industrial-grade A54SX08-PLG84I variant covers extended temperature, and the one-time-programmable antifuse configuration survives power cycles and ESD events with no configuration reload, improving uptime. The robust 84-PLCC J-lead package withstands rework and vibration better than fine-pitch alternatives, and its 1.27 mm pitch is compatible with standard wave-and-reflow mixed-technology assembly used in industrial hardware.
추천
Military and Defense Subsystems
The SX family is a long-standing choice in defense electronics because the antifuse configuration is non-volatile and cannot be read back as a bitstream, protecting firmware IP and defeating configuration-upset concerns in ground-based military hardware. The 8K-gate A54SX08-PLG84 implements bus interfaces, telemetry formatting, and secure-boot support logic. Its instant-on behavior meets the power-up immediacy requirements of weapon and radar subsystems, and Microchip's proven longevity program supports long program lives. For radiation-exposed flight paths, Microchip's RTAX-S rad-hard family (e.g., RTAX1000SL) provides the migration path.
추천
Communications Line Cards
Telecom and datacom line cards historically used SX FPGAs for framing, error detection, and backplane interface logic. The A54SX08-PLG84's 240 MHz toggle capability and FastConnect routing handle counters, CRC engines, and protocol state machines at legacy T1/E1 and backplane rates. The 3.3V/5V tolerant I/O connects directly to 5V TTL backplane signals common in installed telecom chassis, and the antifuse fabric adds no configuration latency at card slot-in. The 84-PLCC footprint also matches the through-hole-repair practices of telecom field service, simplifying maintenance of deployed racks.
추천
Legacy Board Spares and Obsolescence Management
Boards designed in the late 1990s and 2000s around the A54SX08 in PLCC-84 continue in service across industrial, medical, and defense fleets. The A54SX08-PLG84 serves as the exact-form-fit-function spare for these repairs, and its same-footprint variants (A54SX08-PLG84I, -2PLG84, -2PLG84I) give buyers alternate temperature and speed grades when commercial grade is exhausted. Because antifuse programming is permanent and the design tools (Microchip Libero/Designer) still support the SX family, a spare device can be programmed from archived netlists years after the original build, keeping legacy systems fieldable without board redesign.
추천
Test and Measurement Equipment
Bench instruments, ATE fixtures, and interface adapters benefit from the A54SX08-PLG84's instant-on, one-time-programmed logic for timing generators, trigger logic, and pattern capture. The 240 MHz-class performance covers counter and timing-reference duties, while 69 I/O with 5V tolerance interfaces directly with legacy instrument buses and test points. Deterministic antifuse routing gives repeatable propagation delays fixture-to-fixture - valuable when test correlations depend on consistent timing. The PLCC-84 socket-compatible package even allows socketed programming and swap in bench prototypes, something BGA-based FPGAs cannot offer.
추천
추천 제품 요약
엔지니어링 참조 데이터: A54SX08-PLG84 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A54SX08-PLG84I | A54SX08-2PLG84 | A54SX08-P2PLG84I | A54SX08-1PLG84I |
|---|---|---|---|---|---|
| Package | 84-PLCC (PLG84), 1.27 mm J-lead | 84-PLCC (PLG84) - same | 84-PLCC (PLG84) - same | PQCC84 (PLCC-84) - same footprint | 84-PLCC (PLG84) - same |
| Brand | Microsemi (Microchip Technology) | Microsemi (Microchip Technology) | Microsemi (Microchip Technology) | Microsemi (Microchip Technology) | Microsemi (Microchip Technology) |
| System Gates | 8,000 | 8,000 | 8,000 | 8,000 | 8,000 |
| Logic Cells | 512 | 512 | 512 | 512 | 512 |
| User I/O | 69 | 69 | 69 | 69 | 69 |
| Temperature Grade | Commercial | Industrial (I) | Commercial | Industrial (I) | Industrial (I) |
| Programming Technology | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
| Supply Voltage | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
주요 차별점
- Standard commercial grade availability (vs A54SX08-PLG84I)
- Higher speed headroom at the same footprint (vs A54SX08-2PLG84)
- No configuration device required (vs SRAM FPGAs (functional alternatives only))
- Industrial temperature with identical footprint (vs A54SX08-2PLG84I)
설계 노트
The A54SX08-PLG84 is one-time programmable: after antifuse programming there is no reconfiguration path. Complete functional simulation, timing closure, and design-rule checks in the Microchip Designer (Libero SoC) flow before releasing the programming file to production. Keep archived programming (STAPL/FUSE) files together with your netlist and tool version records, since re-programming a mis-programmed part requires physically replacing the device on the board.
The 84-PLCC package uses a 1.27 mm J-lead pitch on a standard square land pattern; most CAD libraries' PLCC-84 footprints apply directly. Because PLCC parts can be socketed, decide early whether the board uses a socket (eases programming and field replacement but adds contact resistance and reliability risk in vibration) or direct SMD attachment (better electrical integrity). Decouple each VCC pin pair with 0.1 uF ceramics placed within a few millimeters of the package, plus bulk 10 uF near the supply entry.
The SX family operates with 3.3V core/5V-tolerant I/O configurations per the 54SX datasheet; confirm the exact supply scheme for your I/O bank before routing. Estimated: at 240 MHz with a large portion of the 512 cells toggling, dynamic current remains modest on the 0.35 um process, but verify with Designer's power estimator for your netlist rather than assuming. Ensure power-up monotonicity per datasheet requirements - antifuse FPGAs need no configuration device, but they do need clean, in-spec ramps at the pins.
규정 준수 정보
Compliance data was not present in the retrieved web data for this mature Microsemi part; consult the Microchip product page or certificate of conformity for RoHS/REACH status of your specific date code.
