Analog Devices

AD521JDZ - Programmable Instrumentation Amplifier | Analog Devices

부품 번호: AD521JDZ ✗ 단종
14-lead ceramic DIP (14-CDIP) Package
MOQ: 1 |

AD521JDZ 개요

The Analog Devices AD521JDZ is a single-circuit, programmable instrumentation amplifier packaged in a 14-lead ceramic DIP and specified for the commercial 0°C to +70°C temperature range. It accepts differential inputs and provides programmable signal gain for precision measurement and signal-conditioning systems. The AD521JDZ belongs to the instrumentation-amplifier hierarchy, combining input amplification, differential rejection, and gain control in one analog integrated circuit.

An instrumentation amplifier is a specialized amplifier optimized for measuring small differential signals while rejecting common-mode voltage. The AD521 family uses a gain-setting resistor to establish its amplification factor, allowing one circuit to support multiple input ranges. This makes it useful where sensors, transducers, strain gauges, and bridge outputs require adjustable gain before conversion or further processing.

The AD521JDZ is identified by the manufacturer as the economical J grade. Analog Devices specifies the J grade from 0°C to +70°C, while the same family includes K, L, and S grades for different drift, linearity, and temperature requirements. Its through-hole ceramic-DIP construction also supports applications that favor a conventional insertion package rather than a surface-mount land pattern.

The AD521 is a second-generation, low-cost monolithic instrumentation amplifier developed by Analog Devices. Its differential input architecture and accurately programmable gain make it appropriate for instrumentation chains where signal amplitude varies or where a single amplifier must accommodate multiple sensor sensitivities. Because a true instrumentation amplifier is intended to preserve signal integrity in the presence of substantial common-mode voltage, the complete amplifier specification remains important when confirming suitability for a particular bridge or sensor.

Typical uses include bridge-based pressure and force measurement, industrial sensor conditioning, biomedical instrumentation, and laboratory measurement systems. In each case, the AD521JDZ can amplify a weak differential sensor output while limiting the effect of common-mode signals. The 0°C to +70°C operating range makes it most appropriate for commercial equipment rather than extended-temperature industrial or automotive environments.

Designers should use the manufacturer's pin-description and gain-setting guidance when assigning PCB connections. The gain resistor must be selected for the required voltage gain, while input and output grounding should preserve the differential signal path. Because the ceramic-DIP package occupies more board area than a surface-mount package, enclosure size and connector spacing should be checked during mechanical planning.

This product page combines the manufacturer's AD521 family information, exact AD521JDZ package and grade details, sourcing guidance, pinout limitations, and practical comparison notes. It also distinguishes true same-package drop-in options from functionally similar amplifiers that require different packages, circuitry, or programming interfaces.

드롭인 대체품: AD521JDZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD521JDZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Temperature Grade, Mounting Type, Gain Control.

Analog Devices
Package: 14-pin ceramic DIP
Product Type: Precision instrumentation amplifier
Temperature Grade: 0°C to +70°C for K grade
비교 대상: AD521JDZ →
Analog Devices
Package: 14-CDIP
Product Type: Monolithic instrumentation amplifier
Temperature Grade: K grade, low drift
비교 대상: AD521JDZ →
Analog Devices
Package: 14-lead ceramic DIP
Product Type: Monolithic precision instrumentation amplifier
Mounting Type: Through-hole
비교 대상: AD521JDZ →
Analog Devices
Package: 14-CDIP, 0.300 in (7.62 mm) pitch
Temperature Grade: L grade
Mounting Type: Through-hole
비교 대상: AD521JDZ →

AD521BDZ

✅ 드롭인 ⚠️ 사양 미검증
📦 14-CDIP
Same AD521 family and 14-CDIP footprint; grade-specific temperature, drift, and linearity ratings differ from AD521JDZ.

📋 참조 대체품 (카탈로그에 없음)

AD521KDZ

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 14-CDIP
Monolithic instrumentation amplifier · 1 circuit · 14-CDIP · 14 pins · 40 MHz · External resistor · Differential input · Built in

가격 문의

데이터시트 보기 →

AD521LDZ

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 14-CDIP
Monolithic instrumentation amplifier · 1 circuit · Up to 1000:1 · 110 dB minimum · 2 pV/°C maximum · 10 V/µs · L grade · 0°C to +70°C

가격 문의

데이터시트 보기 →

AD521SDZ

✅ 드롭인 ⚠️ 사양 미검증
📦 14-CDIP
Same AD521 family and 14-CDIP footprint; S grade extends operation to −55°C to +125°C versus 0°C to +70°C for J grade.

📋 참조 대체품 (카탈로그에 없음)

AD521JDZ 최대 정격 & 전기적 특성

Product Type Instrumentation amplifier
Number of Circuits 1 circuit
Number of Terminals 14 terminals
Package Type 14-lead ceramic DIP (14-CDIP)
Terminal Form Through-hole
Package Shape Rectangular
Temperature Grade Commercial
동작 온도 범위 0°C to +70°C
Input Type Differential
Gain Programming Programmable gain

AD521JDZ rectangular 핀 구성 가이드

AD521JDZ(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD521JDZ의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD521JDZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD521JDZ 적합 용도: 6 애플리케이션s: Strain-Gauge Bridge Conditioning, Industrial Pressure Transducer Interface, Biomedical Instrument Signal Conditioning, Laboratory Data-Acquisition Front End, Portable Sensor Measurement, Balanced Audio and Communication Inputs.

🏭

Strain-Gauge Bridge Conditioning

The AD521JDZ fits strain-gauge and resistive-bridge measurement because it combines differential inputs with programmable gain in one monolithic instrumentation amplifier. A full bridge can produce a small differential output while carrying a larger common-mode voltage, and the amplifier is intended to amplify that difference accurately. The J grade's 0°C to +70°C range suits commercial laboratory and indoor equipment. Select the external gain resistor according to the manufacturer guidance, keep excitation and signal grounds within the device's common-mode limits, and verify offset, drift, and common-mode rejection against the required measurement accuracy.

⚡

Industrial Pressure Transducer Interface

The AD521JDZ is suitable for conditioning the low-level differential output of a bridge-based pressure or force transducer. Its programmable gain allows the interface to accommodate different sensor sensitivities while the differential architecture rejects common-mode voltage present at the bridge outputs. The commercial 0°C to +70°C specification is appropriate for temperature-controlled manufacturing equipment. Designers should calculate the maximum gain against sensor full-scale output and amplifier output swing, then confirm that the selected supply and gain-resistor arrangement satisfy the AD521 family's electrical limits.

💊

Biomedical Instrument Signal Conditioning

The AD521JDZ can condition weak differential signals in biomedical instruments when the selected AD521 grade meets the required accuracy and environmental limits. Differential inputs are useful for physiological electrodes and other small-signal sources where common-mode content can be much larger than the wanted signal. Because the J grade operates from 0°C to +70°C, it is best considered for room-temperature commercial equipment. Input protection, patient isolation, gain selection, and grounding require separate system-level design; confirm those functions are not assigned implicitly to the instrumentation amplifier.

🖥️

Laboratory Data-Acquisition Front End

The AD521JDZ provides a practical analog front end for laboratory data-acquisition systems that accept adjustable-range differential sensor inputs. Programmable gain reduces the need for multiple fixed-gain amplifier boards, while the 14-CDIP package is convenient for prototyping and through-hole assembly. The 0°C to +70°C commercial range covers typical indoor instrumentation. For each input range, verify the required gain, output swing, input common-mode range, and settling behavior against the manufacturer specifications before selecting the gain resistor and downstream converter.

📱

Portable Sensor Measurement

The AD521JDZ can amplify differential sensor outputs in portable measurement equipment when the system remains within the J grade's 0°C to +70°C range. Analog Devices describes the AD521 as a low-cost monolithic instrumentation amplifier, making it appropriate for compact instrument front ends that need differential input handling and programmable gain without a large discrete amplifier network. Power dissipation, gain-induced output range, and input common-mode limits must be checked across battery and temperature conditions. The through-hole package also requires sufficient board area for portable-product mechanical planning.

🌐

Balanced Audio and Communication Inputs

The AD521JDZ can serve as a balanced-input conditioning stage when the source produces a differential signal and adjustable gain is useful. Its differential architecture is better suited to rejecting common-mode pickup than a single-ended amplifier stage, particularly in cable-connected laboratory or communications equipment. The 0°C to +70°C range supports indoor commercial use. Confirm input bandwidth, output swing, noise, and common-mode limits in the AD521 datasheet, and terminate the source according to the application rather than assuming the AD521 input is a general-purpose audio input.

What is the Analog Devices AD521JDZ?
The AD521JDZ is a single-circuit programmable instrumentation amplifier from Analog Devices in a 14-lead ceramic DIP package. According to the manufacturer's AD521 product page, it is a low-cost monolithic instrumentation amplifier with differential inputs and programmable gain. The J-grade version is specified from 0°C to +70°C, making it a commercial-temperature device for precision signal conditioning.
Where can I download the AD521JDZ datasheet PDF?
The official AD521 datasheet and product information are available from Analog Devices through the product page at analog.com/en/products/ad521.html. That page contains the family data sheet, product-selection table, grade definitions, and package information. Use the AD521 family documentation for the AD521JDZ, and confirm the exact 14-CDIP pin configuration against the package drawing before laying out a board.
What is the AD521JDZ pinout?
The AD521JDZ uses a 14-lead through-hole ceramic-DIP pin arrangement, but a verified, numbered pin description is not reproduced on the available product pages. Use the manufacturer datasheet's pin-configuration table and package drawing to assign supply, input, output, gain-resistor, and ground connections. Do not infer the pinout from a different AD521 package or from a surface-mount variant.
Is the AD521JDZ suitable for bridge and strain-gauge measurement?
Yes, the AD521JDZ is appropriate for bridge-based and strain-gauge measurements because it provides differential inputs and programmable gain in one monolithic amplifier. Its commercial operating range is 0°C to +70°C. Final suitability depends on the sensor's excitation voltage, output magnitude, common-mode range, required gain, and permitted offset and drift for the measurement system.
What is the difference between AD521JDZ and AD521KDZ?
AD521JDZ is the economical J grade, while AD521KDZ is the family's low-drift K grade; both retain differential inputs and programmable gain. Analog Devices specifies the J and K grades from 0°C to +70°C. The K grade is the better choice when gain stability is more important than the economical J-grade positioning, while an exact pin-for-pin substitution must be confirmed from the family documentation.
AD521JDZ vs AD521LDZ: which is better for precision measurement?
AD521LDZ is generally the better choice for precision measurement because Analog Devices describes it as the lower-drift, higher-linearity L grade, whereas AD521JDZ is the economical J grade. Both are commercial-temperature family members with differential inputs and programmable gain. Choose the J grade for general cost-sensitive conditioning and the L grade when drift and linearity dominate the error budget.
When should I choose AD521JDZ over AD521SDZ?
Choose AD521JDZ for commercial equipment operating from 0°C to +70°C where economical instrumentation amplification is sufficient. Choose AD521SDZ when the design requires the family's extended-temperature performance from −55°C to +125°C. The S grade adds environmental coverage, so it is generally the safer choice for industrial or outdoor equipment exposed to temperatures outside the J-grade range.
Is AD521JDZ the same as PGA202KP?
No. The AD521JDZ uses an analog resistor-programmed gain interface, while the PGA202KP is a digitally controlled programmable-gain instrumentation amplifier. Their gain-setting methods, control interfaces, packages, and operating characteristics are not interchangeable. PGA202KP can serve a similar measurement role, but it is not a pin-to-pin replacement for AD521JDZ.
What can replace AD521JDZ as a drop-in part?
The closest same-footprint replacements are the AD521 family's J, K, L, and S grade variants when they use the identical package and pin configuration, subject to the manufacturer's ordering information. No cross-manufacturer drop-in replacement was established. Use the Request a Quote form on this page to ask about the exact AD521JDZ grade, package, and sourcing requirements for a production redesign.
What is the best cross-brand equivalent for AD521JDZ?
No verified cross-brand drop-in equivalent for AD521JDZ was established. The AD521JDZ is a through-hole 14-CDIP part with analog resistor-programmed gain, so an amplifier offered only in a surface-mount package, with digital control, or with a different pin count is not a drop-in replacement. A functional redesign may require different gain-setting components, supply arrangements, and PCB layout.
Where can I buy AD521JDZ online?
Use the Request a Quote form on this page to request AD521JDZ availability, volume pricing, and lead time for the exact 14-CDIP commercial-grade part. The form avoids confusion with other AD521 package and temperature-grade variants. Confirm the requested MPN, package marking, quantity, and delivery requirement before releasing a purchase order.
What is the price of AD521JDZ?
Current AD521JDZ pricing is not stated on this page because commercial terms can change with quantity and sourcing conditions. Use the Request a Quote form on this page to obtain the current unit price and any quantity-break structure for the exact MPN. Include the required order quantity, package form, and target delivery date when requesting a quotation.
What is the lead time for AD521JDZ?
Lead time should be confirmed through the Request a Quote form on this page because it depends on order quantity, package form, and current manufacturing availability. When requesting a quotation, identify AD521JDZ explicitly and provide the required annual and prototype quantities. Also state whether any date-sensitive production schedule must be accommodated.
Is AD521JDZ in stock?
Current stock for the exact AD521JDZ should be checked through the Request a Quote form on this page. A valid stock response must match the complete ordering code, including the commercial J grade and 14-CDIP package. Do not treat a listing for another AD521 grade, package, or termination style as confirmation of AD521JDZ inventory.
What are the key specifications of AD521JDZ that engineers should know?
The AD521JDZ is a one-circuit instrumentation amplifier in a 14-CDIP through-hole package, with differential inputs, programmable gain, and a 0°C to +70°C commercial operating range. Analog Devices identifies it as a second-generation, low-cost monolithic device. Supply voltage, gain range, gain accuracy, offset, bandwidth, and common-mode rejection figures must be taken from the manufacturer datasheet for design calculations.

엔지니어링 참조 데이터: AD521JDZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD521JDZ for cost-sensitive, commercial-temperature differential signal conditioning when the required measurement accuracy can be met by the economical J grade. Its differential inputs and programmable gain are well suited to bridge sensors and other small-signal sources, while the 14-CDIP package supports conventional through-hole assembly. Select AD521KDZ when low drift is the principal concern, or AD521LDZ when lower drift and higher linearity justify the additional precision. Use AD521SDZ when the equipment must operate across the extended −55°C to +125°C range. No cross-brand part was confirmed as a true drop-in replacement, so a different manufacturer's instrumentation amplifier should be treated as a redesign unless its package, pinout, gain equation, supply requirements, and electrical limits are independently proven equivalent.

대체품과의 비교

파라미터 이 제품 AD521BDZ AD521KDZ AD521LDZ AD521SDZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 14-CDIP 14-CDIP 14-CDIP 14-CDIP 14-CDIP
Product Type Programmable instrumentation amplifier Programmable instrumentation amplifier Programmable instrumentation amplifier Programmable instrumentation amplifier Programmable instrumentation amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Number of Terminals 14 terminals 14 terminals 14 terminals 14 terminals 14 terminals
Gain Control Analog resistor-programmed gain Analog resistor-programmed gain Analog resistor-programmed gain Analog resistor-programmed gain Analog resistor-programmed gain
Input Architecture Differential input Differential input Differential input Differential input Differential input

주요 차별점

  • Economical commercial-grade option in the AD521 family (vs AD521LDZ)
  • Broader environmental operating range in the S-grade option (vs AD521SDZ)
  • Low-drift option for gain-sensitive measurements (vs AD521KDZ)

설계 노트

Do not replace AD521JDZ with an AD521 grade solely because the family name matches. Confirm the complete ordering code, 14-CDIP package, pin numbering, gain-setting method, temperature grade, supply limits, and gain accuracy. The K, L, and S grades can offer different drift, linearity, and temperature behavior, so even a physically identical footprint does not guarantee equivalent measurement performance.

Route the differential input pair as a compact, balanced pair and keep the gain-setting resistor close to the device's designated gain pin. Place the power-supply bypass capacitor adjacent to the supply pins and maintain a low-impedance ground return for the output reference. Use the manufacturer pinout and recommended layout because the available product pages do not provide a complete numbered pin table.

Check the sensor output against the AD521 family's input common-mode range, maximum differential signal, supply voltage, and output swing before selecting the gain. Estimated gain from the external resistor must leave enough output headroom for worst-case sensor tolerance, excitation drift, and amplifier offset. These calculations use the application's sensor full-scale output and selected gain resistor; consult the datasheet limits before finalizing the circuit.

The 14-CDIP package requires adequate spacing and airflow because its thermal performance depends on the PCB and enclosure rather than a large exposed heat-spreader area. Estimated dissipation equals the supply-to-output voltage difference multiplied by output current, plus internal quiescent dissipation. Check that the resulting junction-temperature estimate remains below the grade's rating under the highest ambient and output-current conditions.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact AD521JDZ ordering code. The product is a commercial-grade IC rather than an AEC-Q100-qualified automotive device.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD521JDZ datasheet AD521JDZ pinout AD521JDZ datasheet pdf AD521JDZ 14-CDIP AD521JDZ instrumentation amplifier AD521JDZ equivalent AD521JDZ replacement AD521JDZ vs AD521KDZ AD521JDZ vs AD521LDZ AD521JDZ price AD521JDZ stock Analog Devices AD521JDZ AD521JDZ strain gauge amplifier AD521JDZ bridge measurement

관련 부품 & 용어

Analog Devices AD521JDZ AD521BDZ AD521KDZ AD521LDZ AD521SDZ PGA202KP instrumentation amplifier programmable-gain amplifier signal-conditioning IC analog integrated circuit differential input common-mode rejection gain drift gain accuracy gain-setting resistor 14-CDIP ceramic DIP through-hole package surface mount strain gauge bridge transducer industrial sensor conditioning 0°C to +70°C
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기