AD843SQ/883B - 34MHz CBFET Fast Settling Op Amp | Analog Devices
부품 번호: AD843SQ/883B ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $25.43 | $25.43 |
| 10 | $23.12 | $231.20 |
| 100 | $20.81 | $2,081.00 |
| 500 | $18.5 | $9,250.00 |
| 1,000 | $16.19 | $16,190.00 |
AD843SQ/883B 개요
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output, used to perform mathematical operations like addition, subtraction, integration, and differentiation in analog circuits. Op amps are fundamental building blocks in analog electronics, forming the basis of filters, buffers, comparators, and instrumentation amplifiers. They are part of the broader category of linear integrated circuits, which also includes voltage regulators, comparators, and timers.
Key features of the AD843SQ/883B include a 34 MHz unity-gain bandwidth, 135 ns settling time to 0.01%, and a slew rate of 250 V/µs (typical). The input offset voltage is 1 mV maximum for the K and B grades, and the input bias current is 0.6 nA typical. The device operates from a supply voltage range of ±4.5 V to ±18 V, and it is stable at gains of 1 or greater. The full power bandwidth is 3.9 MHz, and the device features ground pins between signal pins to reduce crosstalk, achieving -85 dB crosstalk at 5 MHz.
The AD843 uses a CBFET (Complementary Bipolar FET) architecture, combining the low bias current of FET inputs with the high speed of bipolar transistors. This architecture provides excellent DC precision and AC performance, making it suitable for applications such as high-speed data acquisition, active filters, and video amplifiers. The device is specified over the military temperature range of -55°C to +125°C, and the /883B suffix indicates compliance with MIL-STD-883 Class B screening.
Typical applications include high-speed instrumentation, pulse amplifiers, and video processing circuits. The fast settling time and low bias current make it ideal for sample-and-hold circuits and high-speed ADC drivers. The device's high slew rate and bandwidth also make it suitable for use in communication systems and radar signal processing.
When designing with the AD843SQ/883B, ensure proper power supply decoupling with 0.1 µF ceramic capacitors close to the supply pins. The device's high bandwidth requires careful PCB layout to minimize parasitic capacitance and inductance. Also, note that the input common-mode range extends to within 2 V of the supply rails, so input signals should be kept within this range to avoid distortion.
드롭인 대체품: AD843SQ/883B — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AD843SH/883B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD843SQ/883B 최대 정격 & 전기적 특성
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Unity Gain Bandwidth | 34 MHz |
| Settling Time | 135 ns (to 0.01%) |
| Slew Rate | 250 V/µs (typ) |
| Input Bias Current | 0.6 nA (typ) |
| Input Offset Voltage | 1 mV max (K/B grades) |
| Full Power Bandwidth | 3.9 MHz |
| Supply Voltage Range | ±4.5 V to ±18 V |
| 동작 온도 범위 | -55°C to +125°C |
| 패키지 | 8-CERDIP |
| 실장 유형 | Through Hole |
| Crosstalk | -85 dB at 5 MHz |
| MIL-STD-883 | Class B compliant |
| RoHS 상태 | Non-compliant (hermetic package) |
AD843SQ/883B 핀 구성
| 핀 1 | NULL — Offset null |
| 핀 2 | -IN — Inverting input |
| 핀 3 | +IN — Non-inverting input |
| 핀 4 | V- — Negative supply |
| 핀 5 | NULL — Offset null |
| 핀 6 | OUT — Output |
| 핀 7 | V+ — Positive supply |
| 핀 8 | NC — No connection |
일반적인 애플리케이션
AD843SQ/883B 적합 용도: 6 애플리케이션s: High-Speed Data Acquisition, Video Signal Processing, Pulse Amplification, Active Filters, Instrumentation Amplifiers, Communication Systems.
High-Speed Data Acquisition
The AD843SQ/883B's 135 ns settling time to 0.01% and 34 MHz bandwidth make it ideal for driving high-speed ADCs and sample-and-hold circuits. Its low input bias current (0.6 nA) minimizes errors when interfacing with high-impedance sensors. In a data acquisition system, the op amp buffers the sensor signal and provides the necessary drive capability for the ADC input, ensuring accurate conversion of fast transients. The fast settling ensures that the ADC sees a stable voltage within its acquisition window, critical for maintaining system throughput.
추천
Video Signal Processing
With a 34 MHz unity-gain bandwidth and 250 V/µs slew rate, the AD843SQ/883B is well-suited for video amplification and buffering. It can handle composite video signals with minimal distortion, preserving edge sharpness and color accuracy. The high slew rate ensures that large voltage swings, such as sync pulses, are reproduced without slew-induced distortion. In video distribution amplifiers, the op amp provides the necessary drive current for multiple loads while maintaining signal integrity over long cable runs.
추천
Pulse Amplification
The AD843SQ/883B's fast settling and high slew rate make it excellent for amplifying narrow pulses in nuclear instrumentation, LIDAR, and radar systems. Its low input bias current reduces baseline drift in charge-sensitive preamplifiers. The 135 ns settling time ensures that the output accurately represents the pulse amplitude without overshoot or ringing, which is critical for pulse height analysis. The wide bandwidth preserves the pulse shape, allowing precise timing measurements.
추천
Active Filters
The 34 MHz bandwidth of the AD843SQ/883B allows the implementation of high-frequency active filters, such as Butterworth or Chebyshev low-pass filters, with cutoff frequencies in the megahertz range. Its high slew rate ensures that large amplitude signals do not cause distortion, maintaining filter accuracy. The low input bias current is beneficial in filter designs using high-value resistors, as it reduces DC offset errors. The op amp's stability at gains of 1 or greater simplifies filter design.
추천
Instrumentation Amplifiers
The AD843SQ/883B can be used as a building block in discrete instrumentation amplifiers, providing high speed and precision. Its low input bias current and offset voltage contribute to accurate measurement of small differential signals. The high common-mode rejection ratio, combined with the op amp's wide bandwidth, allows the instrumentation amplifier to reject interference while amplifying fast transients. This makes it suitable for medical instrumentation, industrial process control, and test equipment.
추천
Communication Systems
In communication systems, the AD843SQ/883B is used in IF (intermediate frequency) amplification, AGC (automatic gain control) circuits, and active filters. Its 34 MHz bandwidth covers common IF frequencies, and its fast settling time is beneficial in time-division multiplexing systems. The low distortion and high slew rate ensure signal fidelity in QAM and other modulation schemes. The device's military temperature range makes it suitable for aerospace and defense communication equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD843SQ/883B — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD843SH/883B | AD843SE/883B | AD843JNZ | AD843JRZ-REEL | OPA627BP |
|---|---|---|---|---|---|---|
| Package | 8-CERDIP | 8-CERDIP (same) | 20-LCC | 8-PDIP | 8-SOIC | 8-PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Unity Gain Bandwidth | 34 MHz | 34 MHz | 34 MHz | 34 MHz | 34 MHz | 16 MHz |
| Slew Rate | 250 V/µs | 250 V/µs | 250 V/µs | 250 V/µs | 250 V/µs | 55 V/µs |
| Input Bias Current | 0.6 nA | 0.6 nA | 0.6 nA | 0.6 nA | 0.6 nA | 5 pA |
| Supply Voltage Range | ±4.5 V to ±18 V | ±4.5 V to ±18 V | ±4.5 V to ±18 V | ±4.5 V to ±18 V | ±4.5 V to ±18 V | ±4.5 V to ±18 V |
| Operating Temperature Range | -55°C to +125°C | -55°C to +125°C | -55°C to +125°C | 0°C to +70°C | 0°C to +70°C | -25°C to +85°C |
| MIL-STD-883 | Class B | Class B | Class B | No | No | No |
주요 차별점
- MIL-STD-883 Class B screening (vs AD843JNZ)
- Hermetic CERDIP package (vs AD843JRZ-REEL)
- Higher slew rate and bandwidth (vs OPA627BP)
설계 노트
For optimal high-frequency performance, place 0.1 µF ceramic capacitors as close as possible to the V+ and V- pins (pins 7 and 4). Additionally, use a 10 µF tantalum capacitor in parallel for bulk decoupling. Keep the feedback network components close to the inverting input to minimize parasitic capacitance, which can cause peaking in the frequency response.
The AD843SQ/883B in a CERDIP package has a thermal resistance (θJA) of approximately 100°C/W. For high-power applications, ensure adequate airflow or heatsinking. The maximum junction temperature is 175°C, so calculate power dissipation (PD = (V+ - V-) * I_Q + (V+ - VOUT) * I_OUT) and ensure the junction temperature stays within limits.
Do not exceed the absolute maximum supply voltage of ±18 V. Also, avoid driving capacitive loads greater than 100 pF directly, as this can cause instability. If driving larger capacitive loads, use a series resistor (e.g., 50 Ω) at the output. Additionally, the input common-mode range is limited to within 2 V of the supply rails; ensure input signals stay within this range to avoid distortion.
규정 준수 정보
Hermetic CERDIP package contains lead-based solder, so not RoHS compliant. MIL-STD-883 Class B compliant.
