AD8629ARZ - Zero-Drift Dual Op Amp | Analog Devices
부품 번호: AD8629ARZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.38 | $2.38 |
| 10 | $2.14 | $21.40 |
| 100 | $1.92 | $192.00 |
| 500 | $1.72 | $860.00 |
| 1,000 | $1.55 | $1,550.00 |
AD8629ARZ 개요
A zero-drift amplifier is an operational amplifier that continuously corrects its input offset voltage using auto-zeroing or chopping techniques, resulting in microvolt-level offset and near-zero drift over temperature and time. In the amplifier hierarchy, a zero-drift amplifier is a type of precision operational amplifier, which is a subset of linear integrated circuits used for signal conditioning in measurement systems. Engineers select zero-drift amplifiers for sensors, bridges, and data acquisition where DC accuracy is essential.
The AD8629ARZ offers a maximum input offset voltage of 1µV, input offset drift of 0.002µV/°C, and maximum input bias current of 100pA. Its gain, CMRR, and PSRR are all 130dB, providing strong rejection of common-mode and power-supply disturbances. Rail-to-rail input/output swing maximizes dynamic range in single-supply applications, while the dual-channel configuration supports differential or multi-stage designs.
Internally, the AD8629ARZ uses Analog Devices auto-zero topology, which does not require external capacitors and reduces digital switching noise compared with conventional chopper-stabilized amplifiers. The architecture maintains low noise and wide bandwidth while preserving the DC precision of an auto-zero part. The 8-SOIC package is industry standard, straightforward for PCB layout, and compatible with automated assembly.
Typical applications include precision instrumentation, thermocouple and RTD conditioning, medical monitoring, battery-powered portable instruments, IoT sensor nodes, and bridge/strain-gauge signal conditioning. The low offset and drift let systems maintain accuracy for long periods without calibration.
When designing with the AD8629ARZ, place 0.1µF ceramic decoupling capacitors close to the supply pins, avoid driving inputs beyond the rails to prevent latch-up, and use low-value feedback resistors to reduce noise. If a higher supply rail is needed, consider the ADA4522-2ARZ.
드롭인 대체품: AD8629ARZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD8629ARZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Slew Rate, Gain Bandwidth Product, Number of Channels, Operating Temperature Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AD8629ARZ-REEL7
✅ 드롭인✓ 재고 있음
$1.48 / 개
데이터시트 보기 →AD8628ARZ
⚡ 동일 패키지 ⚠️ 사양 미검증✓ 재고 있음
$1.49 / 개
데이터시트 보기 →ADA4522-2ARZ
⚡ 동일 패키지 ⚠️ 사양 미검증✓ 재고 있음
$3.9 / 개
데이터시트 보기 →MS8629
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
OP2177ARZ
⚡ 동일 패키지 ⚠️ 사양 미검증✓ 재고 있음
$0.86 / 개
데이터시트 보기 →AD8629ARZ 최대 정격 & 전기적 특성
| Number of Channels | 2 |
| Supply Voltage Range | 2.7 V to 5 V |
| Input Offset Voltage (max) | 1 µV |
| Input Offset Drift | 0.002 µV/°C |
| Input Bias Current (max) | 100 pA |
| Gain | 130 dB |
| CMRR | 130 dB |
| PSRR | 130 dB |
| Rail-to-Rail Input/Output | Yes |
| 패키지 | 8-SOIC |
| 동작 온도 범위 | -40°C to +125°C |
| RoHS 상태 | Compliant |
| 실장 유형 | Surface Mount |
| Amplifier Type | Zero-Drift |
AD8629ARZ 핀 구성
| 핀 1 | OUT A — Output of amplifier A |
| 핀 2 | -IN A — Inverting input of amplifier A |
| 핀 3 | +IN A — Non-inverting input of amplifier A |
| 핀 4 | V- — Negative supply |
| 핀 5 | +IN B — Non-inverting input of amplifier B |
| 핀 6 | -IN B — Inverting input of amplifier B |
| 핀 7 | OUT B — Output of amplifier B |
| 핀 8 | V+ — Positive supply |
일반적인 애플리케이션
AD8629ARZ 적합 용도: 6 애플리케이션s: Precision Instrumentation, Thermocouple and RTD Conditioning, Medical Monitoring, Battery-Powered Portable Instruments, IoT Sensor Nodes, Bridge and Strain-Gauge Signal Conditioning.
Precision Instrumentation
The AD8629ARZ's 1 µV offset and 0.002 µV/°C drift ensure accurate DC measurements in instrumentation. Its rail-to-rail output maximizes dynamic range, and the dual channel supports differential or multi-stage designs. The low bias current of 100 pA minimizes errors in high-impedance sources, making it ideal for data acquisition systems.
추천
Thermocouple and RTD Conditioning
The AD8629ARZ's ultra-low offset and drift are essential for accurate temperature sensing. Its high CMRR of 130 dB rejects common-mode noise in thermocouple leads, while the low bias current prevents self-heating errors in RTDs. The dual channel allows for cold-junction compensation and amplification in a single package.
추천
Medical Monitoring
In medical devices, the AD8629ARZ provides the precision needed for ECG, EEG, and blood glucose monitors. Its low offset and drift ensure stable readings over time, and the 2.7V to 5V supply range is compatible with battery-powered equipment. The small 8-SOIC package saves space in portable designs.
추천
Battery-Powered Portable Instruments
The AD8629ARZ's low supply voltage (2.7V to 5V) and low power consumption make it ideal for portable instruments. Its rail-to-rail output maximizes battery life by allowing the output to swing close to the supply rails. The dual channel reduces component count, saving board space in compact designs.
추천
IoT Sensor Nodes
For IoT sensor nodes, the AD8629ARZ provides accurate signal conditioning with minimal power. Its low offset and drift reduce calibration requirements, and the 2.7V to 5V supply range matches common IoT power rails. The dual channel allows for multiple sensor inputs in a single device, reducing cost and complexity.
추천
Bridge and Strain-Gauge Signal Conditioning
The AD8629ARZ's high CMRR (130 dB) and low offset are critical for bridge measurements. Its rail-to-rail output allows full-scale output for small bridge signals, and the low drift ensures accuracy over temperature. The dual channel supports both excitation and amplification in a single package.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD8629ARZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD8629ARZ-REEL7 | AD8628ARZ | ADA4522-2ARZ | MS8629 |
|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | MS |
| Number of Channels | 2 | 2 | 1 | 2 | 2 |
| Supply Voltage Range | 2.7V to 5V | 2.7V to 5V | 2.7V to 5V | 4.5V to 55V | 2.7V to 5.5V |
| Input Offset Voltage (max) | 1 µV | 1 µV | 1 µV | 2.5 µV | 5 µV |
| Input Offset Drift | 0.002 µV/°C | 0.002 µV/°C | 0.002 µV/°C | 0.002 µV/°C | 0.02 µV/°C |
| Input Bias Current (max) | 100 pA | 100 pA | 100 pA | 50 pA | 100 pA |
| CMRR | 130 dB | 130 dB | 130 dB | 140 dB | 120 dB |
주요 차별점
- Ultra-low offset voltage of 1 µV (vs MS8629)
- Near-zero drift of 0.002 µV/°C (vs MS8629)
- High CMRR of 130 dB (vs MS8629)
설계 노트
Place 0.1µF ceramic decoupling capacitors close to the V+ and V- pins to ensure stable operation. For best performance, use a 10µF tantalum capacitor in parallel for low-frequency decoupling. The AD8629ARZ operates from 2.7V to 5V, so ensure the supply is clean and within this range.
Keep the feedback network components close to the amplifier to minimize parasitic capacitance and inductance. Use a ground plane to reduce noise and provide a low-impedance return path. For high-impedance inputs, guard traces can reduce leakage currents.
Avoid driving inputs beyond the supply rails to prevent latch-up. Use input protection resistors if necessary. Also, ensure the output is not shorted to ground or supply for extended periods, as this can cause thermal stress. For best noise performance, use low-value feedback resistors (e.g., 1kΩ to 10kΩ).
규정 준수 정보
RoHS compliant per Analog Devices product page. AEC-Q100 not applicable for this commercial-grade part.
