AD8676ARZ - Ultra Precision Dual Op Amp | Analog Devices
부품 번호: AD8676ARZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.59 | $3.59 |
| 10 | $3.25 | $32.50 |
| 100 | $2.85 | $285.00 |
| 500 | $2.5 | $1,250.00 |
| 1,000 | $2.25 | $2,250.00 |
AD8676ARZ 개요
An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, and mathematical operations. The AD8676 belongs to the precision op amp category, which prioritizes low offset voltage, low drift, and low noise over raw bandwidth. In the hierarchy of amplifiers, it sits above general-purpose op amps and below specialized instrumentation amplifiers, offering a balance of performance and cost.
Key features of the AD8676ARZ include a 2.8 nV/√Hz voltage noise density, rail-to-rail output swing, and a wide supply range of ±2.5 V to ±18 V (or 5 V to 36 V single supply). The device operates over the extended industrial temperature range of -40°C to +125°C, making it suitable for harsh environments. Its low input bias current and high DC precision make it ideal for precision data acquisition and sensor interfaces.
Technically, the AD8676 uses a proprietary precision trimming technique to achieve its low offset and drift. The dual-channel configuration allows for compact designs in multi-channel systems. The rail-to-rail output stage maximizes dynamic range, which is essential for single-supply applications. The device also features excellent PSRR and CMRR, ensuring accurate performance in noisy environments.
Typical applications include precision instrumentation, medical devices such as ECG and EEG monitors, industrial process control, and high-resolution ADC drivers. The low noise and low drift make it particularly suited for thermocouple and strain gauge signal conditioning, where small signals must be amplified without introducing errors.
When designing with the AD8676ARZ, ensure proper decoupling of the power supply pins with 0.1 µF ceramic capacitors placed close to the device. For best noise performance, use a low-noise power supply and consider a guard ring around the input pins on the PCB to minimize leakage currents.
드롭인 대체품: AD8676ARZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD8676ARZ (동일 폼 팩터 및 풋프린트) — 차이점: Amplifier Type, Operating Temperature Range, Gain Bandwidth Product, Slew Rate, Supply Voltage Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
OPA2188
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD8628ARZ-REEL7
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.24 / 개
데이터시트 보기 →ADA4610-2ARZ
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.19 / 개
데이터시트 보기 →OPA1612
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD8676ARZ 최대 정격 & 전기적 특성
| Number of Channels | 2 |
| Supply Voltage Range | 5 V to 36 V (single), ±2.5 V to ±18 V (dual) |
| Voltage Noise Density | 2.8 nV/√Hz |
| Input Offset Voltage | 10 µV (max) |
| Input Offset Drift | 0.1 µV/°C |
| Input Bias Current | 0.5 nA (max) |
| Gain Bandwidth Product | 10 MHz |
| Slew Rate | 2.5 V/µs |
| Rail-to-Rail Output | Yes |
| 동작 온도 범위 | -40°C to +125°C |
| 패키지 | 8-SOIC (0.154", 3.90mm Width) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| MSL 레벨 | 1 |
| Amplifier Type | Standard (General Purpose) |
AD8676ARZ 핀 구성
| 핀 1 | OUT A — Output of amplifier A |
| 핀 2 | -IN A — Inverting input of amplifier A |
| 핀 3 | +IN A — Non-inverting input of amplifier A |
| 핀 4 | V- — Negative supply voltage |
| 핀 5 | +IN B — Non-inverting input of amplifier B |
| 핀 6 | -IN B — Inverting input of amplifier B |
| 핀 7 | OUT B — Output of amplifier B |
| 핀 8 | V+ — Positive supply voltage |
일반적인 애플리케이션
AD8676ARZ 적합 용도: 6 애플리케이션s: Precision Instrumentation, Medical Devices, Industrial Process Control, Audio Signal Processing, Data Acquisition Systems, Sensor Signal Conditioning.
Precision Instrumentation
The AD8676ARZ's ultralow offset voltage (10 µV max) and low drift (0.1 µV/°C) make it ideal for precision instrumentation such as data acquisition systems and sensor signal conditioning. Its dual-channel configuration allows compact multi-channel designs, and the rail-to-rail output maximizes dynamic range in single-supply systems. The low noise (2.8 nV/√Hz) ensures accurate measurement of small signals, while the wide supply range (5 V to 36 V) accommodates various power rails. In a typical thermocouple amplifier circuit, the AD8676ARZ provides stable gain with minimal error, ensuring high measurement accuracy over temperature.
추천
Medical Devices
In medical devices such as ECG and EEG monitors, the AD8676ARZ provides the low noise and high precision required for biopotential signal amplification. Its 2.8 nV/√Hz noise density ensures that small physiological signals are not buried in noise, and the low input bias current (0.5 nA max) minimizes electrode offset errors. The dual-channel design is ideal for multi-lead monitoring, and the extended temperature range (-40°C to +125°C) ensures reliable operation in clinical environments. The rail-to-rail output allows direct interfacing with ADCs, simplifying the signal chain and reducing component count.
추천
Industrial Process Control
The AD8676ARZ is well-suited for industrial process control applications such as PLC analog input modules and temperature controllers. Its wide supply voltage range (up to 36 V) allows direct operation from 24 V industrial buses, and the high CMRR and PSRR reject common-mode noise and power supply variations. The low offset drift ensures accurate measurement over the -40°C to +125°C temperature range, critical for outdoor or harsh factory environments. In a 4-20 mA loop transmitter, the AD8676ARZ can buffer the sensor signal with high accuracy, maintaining loop integrity and minimizing calibration requirements.
추천
Audio Signal Processing
The AD8676ARZ's low voltage noise (2.8 nV/√Hz) and high bandwidth (10 MHz) make it suitable for high-quality audio signal processing, such as active filters and preamplifiers. The rail-to-rail output allows maximum signal swing, and the low distortion ensures faithful reproduction. In a phono preamp, the AD8676ARZ can amplify the low-level signal from a cartridge with minimal added noise, preserving the dynamic range of the recording. Its dual-channel configuration is ideal for stereo applications, reducing board space and cost compared to using two single op amps.
추천
Data Acquisition Systems
In data acquisition systems, the AD8676ARZ serves as a precision buffer or gain stage before an ADC. Its low noise and low offset ensure that the ADC's full resolution is utilized, and the rail-to-rail output allows the signal to span the ADC's input range. The wide bandwidth (10 MHz) supports high-speed sampling, while the low input bias current minimizes errors when driving high-impedance sources. In a multi-channel DAQ, the dual-channel AD8676ARZ can handle two channels per package, reducing component count and PCB area. The device's stability with capacitive loads makes it easy to interface with ADC input capacitors.
추천
Sensor Signal Conditioning
The AD8676ARZ is ideal for conditioning signals from various sensors, including thermocouples, strain gauges, and photodiodes. Its low offset voltage and drift ensure accurate amplification of small DC signals, while the low noise preserves signal integrity. The rail-to-rail output allows direct interfacing with ADCs or microcontrollers, simplifying the design. In a strain gauge bridge amplifier, the AD8676ARZ can provide the necessary gain with high common-mode rejection, rejecting noise from the excitation voltage. The wide supply range and industrial temperature range make it suitable for harsh environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD8676ARZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD8676ARMZ | OPA2188 | AD8628ARZ-REEL7 | ADA4610-2ARZ | OPA1612 |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-MSOP | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Texas Instruments | Analog Devices | Analog Devices | Texas Instruments |
| Voltage Noise Density | 2.8 nV/√Hz | 2.8 nV/√Hz | 8 nV/√Hz | 22 nV/√Hz | 7.3 nV/√Hz | 1.1 nV/√Hz |
| Input Offset Voltage | 10 µV max | 10 µV max | 25 µV max | 5 µV max | 50 µV max | 100 µV max |
| Gain Bandwidth Product | 10 MHz | 10 MHz | 2 MHz | 2.5 MHz | 16.3 MHz | 80 MHz |
| Supply Voltage Range | 5 V to 36 V | 5 V to 36 V | 4.5 V to 36 V | 2.7 V to 5.5 V | ±5 V to ±15 V | ±2.25 V to ±18 V |
| Rail-to-Rail Output | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C |
주요 차별점
- Ultralow voltage noise of 2.8 nV/√Hz (vs OPA2188)
- Higher bandwidth of 10 MHz (vs OPA2188)
- Lower input offset voltage of 10 µV (vs ADA4610-2ARZ)
설계 노트
For optimal performance, use a low-noise power supply and place 0.1 µF ceramic capacitors close to the V+ and V- pins. Additionally, a 10 µF tantalum capacitor in parallel can help filter low-frequency noise. The AD8676ARZ has a wide supply range, but ensure the supply voltage does not exceed the absolute maximum ratings to avoid damage.
To minimize leakage currents and noise pickup, use a guard ring around the input pins (pins 2, 3, 5, 6) on the PCB. Keep the input traces short and shielded from noisy digital signals. A ground plane under the device is recommended to reduce parasitic capacitance and improve stability.
Avoid driving highly capacitive loads directly, as this can cause instability. If a large load capacitor is necessary, add a small series resistor (e.g., 50 Ω) at the output. Also, ensure the input common-mode voltage stays within the specified range to prevent phase reversal or latch-up.
규정 준수 정보
RoHS compliant per distributor listings. No AEC-Q100 qualification indicated for this part.
