AD9174BBCZ - 16-Bit 12.6 GSPS RF DAC | Analog Devices
부품 번호: AD9174BBCZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
AD9174BBCZ 개요
An RF DAC is a data converter that directly synthesizes analog RF signals from digital baseband or IF data, removing multiple analog upconversion stages. In the signal chain hierarchy, the AD9174BBCZ functions as a digital-to-analog converter within the broader data converter IC family, and it is often paired with RF transceivers, FPGAs, and clock generators. The 16-bit resolution combined with 12.6 GSPS update rate enables wide instantaneous bandwidth for modern communication and radar waveforms.
Key features include dual independent DAC channels, 16-bit resolution, maximum DAC sample rate of 12.6 GSPS, JESD204B input interface supporting 8 lanes at 15.4 Gbps, and a high-performance on-chip clock multiplier. The integrated DSP provides flexible interpolation, NCO, and digital upconversion functions that allow direct RF signal generation from L-band through C-band and above, depending on the clocking configuration.
From an architecture perspective, the AD9174BBCZ integrates a programmable interpolator, digital upconverter, and numerically controlled oscillator (NCO) with the high-speed DAC core. This reduces the amount of external logic and programmable fabric required in the transmit path. The device is designed for dense multi-band deployments where low power, high output bandwidth, and excellent spectral performance are critical.
Typical applications include 5G/6G wireless infrastructure, radar and electronic warfare systems, satellite communications, and high-performance test and measurement instrumentation. The combination of 12.6 GSPS sampling and 15.4 Gbps JESD204B lanes allows a single device to serve both single-band and multiband direct-to-RF architectures.
When designing with this device, pay close attention to the reference clock quality, JESD204B link configuration, and PCB layout for the high-speed serial lines. The on-chip DAC clock multiplier reduces external clock component count but requires a clean low-jitter reference to achieve rated SFDR and phase noise performance.
드롭인 대체품: AD9174BBCZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AD9174BBCZ (동일 폼 팩터 및 풋프린트) — 차이점: Number of DACs, Package, Data Interface, Digital Signal Processing, Operating Temperature Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AD9174BBPZ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AD9173BBCZ
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$120 / 개
데이터시트 보기 →AD9172BBCZ
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$59.7 / 개
데이터시트 보기 →AD9176BBCZ
⚡ 동일 패키지 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD9175BBCZ
⚡ 동일 패키지 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD9174BBCZ 최대 정격 & 전기적 특성
| 분해능 | 16-bit |
| Number of DACs | 2 (dual) |
| Maximum DAC Sample Rate | 12.6 GSPS |
| Input Data Interface | 8-lane JESD204B, up to 15.4 Gbps per lane |
| On-Chip DAC Clock Multiplier | Yes |
| Digital Signal Processing | Single-band and multiband direct-to-RF |
| Direct Digital Synthesizer | Yes |
| 패키지 | 144-BGA-ED (10x10) |
| 실장 유형 | Surface Mount |
| Datasheet Pages | 165 |
| Datasheet Revision | Rev. B |
| 수명 주기 상태 | Active (in production per distributor listings) |
AD9174BBCZ 144-bga-ed (10x10) 핀 구성 가이드
AD9174BBCZ(144-bga-ed (10x10) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD9174BBCZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD9174BBCZ 적합 용도: 6 애플리케이션s: 5G/6G Wireless Infrastructure, Radar and Electronic Warfare, Direct RF Test and Measurement, Satellite Communications, Software Defined Radio, Broadband Communication Systems.
5G/6G Wireless Infrastructure
The AD9174BBCZ is ideal for 5G/6G base station transmitters where wide instantaneous bandwidth and direct-to-RF operation reduce analog upconversion complexity. Its 12.6 GSPS sample rate supports multi-carrier and multiband radio configurations while the 8-lane JESD204B interface at 15.4 Gbps connects directly to baseband FPGAs. The on-chip DDS and digital upconversion enable flexible frequency planning, and the dual DAC channels support MIMO or carrier aggregation transmit paths.
추천
Radar and Electronic Warfare
In phased-array radar and electronic warfare (EW) systems, the AD9174BBCZ generates complex wideband waveforms directly at RF. The 16-bit resolution and 12.6 GSPS update rate provide excellent spurious performance for high-fidelity arbitrary waveform generation. The integrated DDS and multiband DSP enable fast frequency hopping and simultaneous multi-band emission. Its 144-BGA-ED package is suitable for dense array modules where board area is at a premium.
추천
Direct RF Test and Measurement
The AD9174BBCZ is well suited to arbitrary waveform generators, signal generators, and wideband RF test instruments. Its 12.6 GSPS sampling supports generation of multi-GHz signals with fine frequency resolution, while the JESD204B interface streamlines data transfer from FPGAs or ASICs. Engineers benefit from the on-chip DAC clock multiplier, which reduces external clock generation cost. The device enables both single-tone and modulated wideband test signals with excellent phase noise.
추천
Satellite Communications
For satellite ground terminals and payloads, the AD9174BBCZ enables direct L/Ku/Ka-band synthesis with high spectral purity. The dual-channel architecture supports simultaneous transmission of multiple carriers, while the integrated NCO and interpolation filters simplify digital upconversion for DVB-S2X and wideband modems. The 15.4 Gbps JESD204B interface provides enough bandwidth for high-order modulation schemes, and the on-chip clock multiplier minimizes external component count in space-constrained modem designs.
추천
Software Defined Radio
Software-defined radio (SDR) architectures benefit from the AD9174BBCZ's flexibility to generate any frequency band from DC to several GHz. The device supports both single-band and multiband direct-to-RF modes, allowing a single hardware platform to cover many communication standards. The 16-bit resolution and fast sample rate preserve signal quality for wideband waveforms. Combined with an FPGA and a companion ADC, the AD9174BBCZ forms a complete software-configurable transceiver front end.
추천
Broadband Communication Systems
The AD9174BBCZ is used in microwave backhaul, cable access, and broadband aggregation equipment where high symbol rates and multi-carrier operation demand a high-performance DAC. Its 12.6 GSPS sample rate and multiband DSP allow direct synthesis of complex QAM waveforms, while the dual channels enable concurrent transmit or diversity schemes. The on-chip clock multiplier reduces system cost, and the 8-lane JESD204B input integrates efficiently with modern baseband processors.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD9174BBCZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD9174BBPZ | AD9173BBCZ | AD9172BBCZ | AD9176BBCZ |
|---|---|---|---|---|---|
| Package | 144-BGA-ED (10x10) | 144-BGA-ED (10x10) | 144-BGA-ED (10x10) | 144-BGA-ED (10x10) | 144-BGA-ED (10x10) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
주요 차별점
- 12.6 GSPS dual DAC with 16-bit resolution (vs AD9172BBCZ)
- 8-lane JESD204B at 15.4 Gbps/lane (vs AD9173BBCZ)
- Integrated DDS and digital upconversion (vs AD9176BBCZ)
- Same-package family migration (vs AD9174BBPZ)
설계 노트
The AD9174BBCZ contains both analog and digital supply domains. Use low-noise LDOs or filtered DC-DC converters for analog supplies, and place a 100 nF capacitor plus a 1 µF capacitor close to each power pin. Ferrite beads can isolate analog and digital grounds to prevent digital switching noise from coupling into the DAC output spectrum.
The JESD204B lanes operate up to 15.4 Gbps and must be routed as controlled-impedance differential pairs (typically 100 Ω differential). Match lane lengths within a few mils and minimize vias to reduce skew and impedance discontinuities. Keep high-speed lanes away from the RF output traces and clock distribution to avoid crosstalk.
The 144-BGA-ED package has an exposed die pad for heat transfer. Ensure adequate thermal vias connect the pad to internal ground planes. Verify the junction temperature against the power dissipation and package thermal resistance from the datasheet. For dense multi-channel arrays, forced airflow or a heatsink may be required.
The on-chip DAC clock multiplier relies on a clean external reference clock. A high-jitter reference directly degrades output SFDR and phase noise. Use a low-phase-noise clock source and keep the clock trace short and isolated. Also, configure JESD204B subclass and SYSREF timing correctly during link bring-up to avoid data alignment errors.
규정 준수 정보
Compliance data not included in verified web data. Consult the AD9174 datasheet and manufacturer product page for RoHS/REACH declarations.
