ADA4895-2ARZ - Dual 1nV/√Hz High Speed Op Amp | Analog Devices
부품 번호: ADA4895-2ARZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.42 | $3.42 |
| 10 | $3.08 | $30.80 |
| 100 | $2.74 | $274.00 |
| 500 | $2.47 | $1,235.00 |
| 1,000 | $2.19 | $2,190.00 |
ADA4895-2ARZ 개요
A high speed operational amplifier (op amp) is a voltage amplifier with a gain-bandwidth product typically exceeding 10 MHz, designed to amplify signals with fast slew rates and wide bandwidths. It is a fundamental building block in analog signal processing, used in applications such as active filters, buffers, and instrumentation. The ADA4895-2 belongs to the category of voltage feedback amplifiers, which offer high input impedance and ease of use in feedback configurations. Within the hierarchy of amplifiers, it sits as a high speed op amp, a subset of operational amplifiers, which are essential components in analog and mixed-signal systems.
Key features of the ADA4895-2 include a low quiescent current of 3 mA per amplifier, rail-to-rail output, and a spurious-free dynamic range (SFDR) of -72 dBc at 2 MHz. The low input noise and high SFDR make it suitable for ultrasound, low noise preamplifiers, and other sensitive applications. The amplifier also features a wide supply range, allowing flexibility in system design. The rail-to-rail output enables maximum output swing, which is critical for single-supply operation and maximizing dynamic range.
Technically, the ADA4895-2 uses a voltage feedback architecture with a complementary input stage, providing low offset voltage and high common-mode rejection. The device is fabricated using a high-speed complementary bipolar process, ensuring excellent AC performance. The amplifier is stable at gains of 10 or higher, which is specified for applications requiring high closed-loop gain. The 146 MHz bandwidth at gain +10 and 943 V/μs slew rate enable fast signal processing, while the 22 ns settling time to 0.1% ensures accurate response in pulsed applications.
Typical applications include ultrasound imaging systems, low noise preamplifiers, and high speed data acquisition. In ultrasound, the low noise and high bandwidth allow for precise signal amplification from transducers. In preamplifiers, the low 1/f noise is critical for maintaining signal integrity at low frequencies. The wide supply range and rail-to-rail output make it suitable for battery-powered and single-supply systems.
When designing with the ADA4895-2, ensure proper power supply decoupling with 0.1 μF and 10 μF capacitors close to the supply pins. The gain-setting resistors should be placed close to the inverting input to minimize parasitic capacitance. For optimal noise performance, use low-value resistors and keep the feedback network impedance low.
드롭인 대체품: ADA4895-2ARZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADA4895-2ARZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Slew Rate, Spurious-Free Dynamic Range.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ADA4895-2ARMZ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADA4895-2ARMZ-RL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADA4897-2ARMZ
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.18 / 개
데이터시트 보기 →ADA4895-2ARZ 최대 정격 & 전기적 특성
| Number of Channels | 2 |
| Amplifier Type | Voltage Feedback |
| Gain Bandwidth Product | 146 MHz (at G=+10) |
| Slew Rate | 943 V/μs |
| Input Voltage Noise (1/f) | 2 nV/√Hz at 10 Hz |
| Spurious-Free Dynamic Range | -72 dBc at 2 MHz |
| Quiescent Current per Amplifier | 3 mA |
| Supply Voltage Range | 3 V to 10 V |
| 출력 유형 | Rail-to-Rail |
| Settling Time (0.1%) | 22 ns |
| Minimum Stable Gain | 10 |
| 동작 온도 범위 | -40°C to +125°C |
| 패키지 | 10-Lead MSOP |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
ADA4895-2ARZ 핀 구성
| 핀 1 | OUT A — Output of amplifier A |
| 핀 2 | -IN A — Inverting input of amplifier A |
| 핀 3 | +IN A — Non-inverting input of amplifier A |
| 핀 4 | V- — Negative supply voltage |
| 핀 5 | +IN B — Non-inverting input of amplifier B |
| 핀 6 | -IN B — Inverting input of amplifier B |
| 핀 7 | OUT B — Output of amplifier B |
| 핀 8 | V+ — Positive supply voltage |
| 핀 9 | NC — No connect |
| 핀 10 | NC — No connect |
일반적인 애플리케이션
ADA4895-2ARZ 적합 용도: 6 애플리케이션s: Ultrasound Imaging, Low Noise Preamplifiers, High Speed Data Acquisition, Active Filters, Portable Instrumentation, Communications Receivers.
Ultrasound Imaging
The ADA4895-2's low input noise of 2 nV/√Hz at 10 Hz and high SFDR of -72 dBc at 2 MHz make it ideal for ultrasound signal conditioning. In an ultrasound receiver, the amplifier boosts the tiny echo signals from the transducer while maintaining signal integrity. The high bandwidth of 146 MHz ensures that the fast-rising pulses are accurately amplified, and the rail-to-rail output maximizes dynamic range. The low quiescent current of 3 mA per amplifier is beneficial for portable ultrasound devices where power consumption is critical. The wide supply range of 3 V to 10 V allows operation from a single lithium-ion battery or a regulated 5 V rail.
추천
Low Noise Preamplifiers
The ADA4895-2 is an excellent choice for low noise preamplifiers in applications such as audio, instrumentation, and sensor interfaces. Its 1/f noise of 2 nV/√Hz at 10 Hz ensures minimal noise contribution at low frequencies, which is critical for accurate signal amplification. The high slew rate of 943 V/μs allows the amplifier to handle large transient signals without distortion. The rail-to-rail output enables maximum output swing, which is useful when driving ADCs or other loads. The low quiescent current of 3 mA per amplifier makes it suitable for battery-powered preamplifiers. The gain ≥10 stability is ideal for preamplifier stages that require high closed-loop gain.
추천
High Speed Data Acquisition
In high speed data acquisition systems, the ADA4895-2 provides the necessary bandwidth and settling time to accurately capture fast signals. With a large signal bandwidth of 146 MHz and a settling time of 22 ns to 0.1%, it can drive high-speed ADCs without introducing significant errors. The low noise and high SFDR ensure that the signal-to-noise ratio is maintained, which is essential for high-resolution conversion. The wide supply range allows the amplifier to be powered from the same rail as the ADC, simplifying power supply design. The dual-channel configuration is useful for simultaneous sampling of multiple channels, reducing component count and board space.
추천
Active Filters
The ADA4895-2 is well-suited for active filter designs that require high frequency operation and low noise. Its high bandwidth of 146 MHz allows the implementation of filters with cutoff frequencies in the tens of megahertz, which is useful in communication and signal processing systems. The low input noise ensures that the filter does not degrade the signal-to-noise ratio. The rail-to-rail output allows the filter to drive loads with maximum voltage swing. The gain ≥10 stability is compatible with multiple feedback and Sallen-Key topologies that typically have high Q factors. The low quiescent current makes it efficient for multi-stage filters.
추천
Portable Instrumentation
The ADA4895-2 is ideal for portable instrumentation due to its low power consumption and wide supply range. With a quiescent current of only 3 mA per amplifier, it extends battery life in handheld devices. The 3 V to 10 V supply range allows operation from a single lithium-ion cell or two alkaline batteries. The rail-to-rail output maximizes the dynamic range in battery-powered systems where the supply voltage is limited. The small 10-lead MSOP package saves board space, which is critical in compact designs. The low noise and high bandwidth make it suitable for precision measurements in portable test equipment.
추천
Communications Receivers
In communications receivers, the ADA4895-2 provides high dynamic range and low distortion, which are essential for processing weak signals in the presence of strong interferers. The SFDR of -72 dBc at 2 MHz ensures that the amplifier does not introduce significant intermodulation products. The high bandwidth of 146 MHz supports IF frequencies in the tens of megahertz. The low noise figure helps maintain the receiver's sensitivity. The dual-channel configuration is useful for I/Q demodulation, where two matched amplifiers are required. The wide supply range allows operation from a 5 V or 3.3 V rail commonly used in communication systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADA4895-2ARZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADA4895-2ARMZ | ADA4895-2ARMZ-RL | ADA4897-2ARMZ |
|---|---|---|---|---|
| Package | 10-Lead MSOP | 10-Lead MSOP | 10-Lead MSOP | 10-Lead MSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 | 2 | 2 | 2 |
| Gain Bandwidth Product | 146 MHz (at G=+10) | 146 MHz (at G=+10) | 146 MHz (at G=+10) | 230 MHz (at G=+1) |
| Slew Rate | 943 V/μs | 943 V/μs | 943 V/μs | 120 V/μs |
| Input Voltage Noise (1/f) | 2 nV/√Hz at 10 Hz | 2 nV/√Hz at 10 Hz | 2 nV/√Hz at 10 Hz | 1 nV/√Hz at 10 Hz |
| Quiescent Current per Amplifier | 3 mA | 3 mA | 3 mA | 3 mA |
| Minimum Stable Gain | 10 | 10 | 10 | 1 |
주요 차별점
- Low input noise of 2 nV/√Hz at 10 Hz (vs ADA4897-2ARMZ)
- High slew rate of 943 V/μs (vs ADA4897-2ARMZ)
- Gain ≥10 stability (vs ADA4897-2ARMZ)
설계 노트
The ADA4895-2 operates over a supply range of 3 V to 10 V. Use low-ESR ceramic capacitors (0.1 μF and 10 μF) placed close to the V+ and V- pins to ensure stable operation and minimize power supply noise. For dual-supply operation, ensure both supplies are properly decoupled to ground.
For optimal high frequency performance, place the feedback resistors and input resistors close to the amplifier pins to minimize parasitic capacitance and inductance. Use a ground plane under the amplifier and keep signal traces short. The exposed pad (if present) should be soldered to the PCB ground for improved thermal performance.
The ADA4895-2 is stable at gains of 10 or higher. Do not use it in unity-gain configurations as it may oscillate. Also, avoid driving capacitive loads directly without a series resistor, as this can cause instability. For capacitive loads, use a small resistor (e.g., 50 Ω) in series with the output.
규정 준수 정보
RoHS compliant per Analog Devices product page. No AEC-Q100 qualification indicated.
