Analog Devices

ADF4169WCCPZ - 13.5GHz Fractional-N PLL | Analog Devices

부품 번호: ADF4169WCCPZ ✓ 활성
24-lead LFCSP-WQ, 4 mm × 4 mm Package 13.5 GHz Speed
MOQ: 1 |

ADF4169WCCPZ 개요

The Analog Devices ADF4169WCCPZ is a 13.5 GHz fractional-N frequency synthesizer with direct modulation and fast and slow waveform generation in a 24-lead LFCSP package measuring 4 mm by 4 mm. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and a 25-bit fixed-modulus fractional interpolator. The device provides one synthesizer output and supports sub-hertz frequency resolution.

A fractional-N frequency synthesizer is a phase-locked-loop timing IC that multiplies or divides a stable reference frequency while using a fractional divider to achieve fine frequency resolution. Its functional hierarchy is fractional-N synthesizer → frequency synthesizer → phase-locked loop → clock and timing IC → integrated circuit. This architecture is useful when a system needs programmable RF or microwave frequencies, direct modulation, or controlled frequency ramps without requiring multiple independent clock-generation blocks.

The ADF4169's headline capabilities include operation to 13.5 GHz, a 25-bit fixed modulus, sub-hertz frequency resolution, direct modulation, and both fast and slow waveform generation. These features make it suitable for frequency-agile RF systems, phase-controlled modulation, sweep generation, communications equipment, test instruments, and FMCW radar signal chains. The 24-lead LFCSP-WQ package provides a compact surface-mount implementation for high-speed RF boards.

The internal phase-frequency detector compares the divided feedback signal with the divided reference. The precision charge pump drives the loop filter, while the fractional interpolator controls the effective division ratio. A 25-bit fixed modulus allows very fine frequency increments, and the programmable reference divider accommodates different reference-clock arrangements. Exact phase noise, lock-time, reference-input, supply-voltage, temperature-range, and current-consumption limits must be confirmed in the Analog Devices ADF4169 datasheet before final circuit design.

Typical uses include direct-modulated microwave transmitters, FMCW radar local-oscillator generation, fast sweep or chirp generation, and precision test-equipment signal sources. In an RF design, the synthesizer can establish an LO or reference tone while its modulation and waveform functions support controlled phase or frequency changes. The compact package helps minimize board area, although RF layout, grounding, loop-filter selection, and output-chain matching remain central to achieving predictable performance.

A critical design consideration is loop-filter design because its bandwidth, damping, charge-pump current, and reference settings determine lock behavior and phase noise. Preserve the recommended reference, charge-pump, and power-supply routing shown in the manufacturer application guidance, and keep the loop-filter components close to the synthesizer pins. Confirm the required reference frequency and maximum operating rate for the intended modulation scheme before committing the schematic.

This product page combines the manufacturer's core functional information, package identification, sourcing guidance, engineering-oriented application analysis, and a strictly filtered replacement assessment. It also distinguishes confirmed direct alternatives from devices that may offer similar synthesis performance but are not documented as pin-compatible drop-in replacements.

드롭인 대체품: ADF4169WCCPZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADF4169WCCPZ (동일 폼 팩터 및 풋프린트) — 차이점: Frequency Resolution, Modulation Capability, Package.

Analog Devices
Frequency Resolution: Subhertz
Modulation Capability: Fast and slow waveform generation
Package: 24-lead LFCSP-WQ, 4 mm x 4 mm
비교 대상: ADF4169WCCPZ →

ADF4169CCPZ

✅ 드롭인
Analog Devices
📦 24-lead LFCSP-WQ, 4 mm × 4 mm
Fractional-N frequency synthesizer · 13.5 GHz · 25-bit fixed modulus · Subhertz · Low-noise digital phase-frequency detector · Precision charge pump · Programmable · Fast and slow waveform generation

가격 문의

데이터시트 보기 →

ADF4169WCCPZ 사양

Maximum Synthesizer Frequency 13.5 GHz
Fixed Modulus 25 bit
Frequency Resolution Sub-hertz
Output Count 1 output
PLL Architecture Fractional-N
Modulation Capability Direct modulation
Waveform Generation Fast and slow waveform generation
Phase-Frequency Detector Low-noise digital PFD
Charge Pump Precision charge pump
Reference Divider Programmable
Fractional Interpolator 25-bit fixed-modulus architecture
패키지 24-lead LFCSP-WQ, 4 mm × 4 mm
실장 유형 Surface mount
Process Technology CMOS

ADF4169WCCPZ 24-lead lfcsp-wq, 4 mm × 4 mm 핀 구성 가이드

ADF4169WCCPZ(24-lead lfcsp-wq, 4 mm × 4 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADF4169WCCPZ의 24-lead lfcsp-wq, 4 mm × 4 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADF4169WCCPZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADF4169WCCPZ 적합 용도: 6 애플리케이션s: FMCW Radar Local Oscillator, Direct-Modulated Microwave Transmitter, Fast Frequency Sweep Generator, Communications RF Signal Source, RF Test and Measurement Instrument, Precision RF Frequency Synthesizer.

📡

FMCW Radar Local Oscillator

ADF4169WCCPZ fits an FMCW radar local-oscillator or reference-generation stage because it combines a 13.5 GHz fractional-N synthesizer with direct modulation plus fast and slow waveform generation. The 25-bit fixed modulus permits sub-hertz frequency resolution, which is valuable when translating a fine radar frequency command into an accurate synthesized output. The one-output device can drive an RF signal chain after the required filtering, amplification, and matching. System designers should select the loop-filter bandwidth around the intended sweep and modulation behavior, then validate reference spurs, phase noise, lock time, and temperature-dependent performance in the complete radar front end.

🌐

Direct-Modulated Microwave Transmitter

ADF4169WCCPZ is suitable for a direct-modulated microwave transmitter requiring a compact programmable frequency source. Its 13.5 GHz ceiling supports high-frequency RF generation, while direct modulation provides a path for embedding modulation information at the synthesizer. Fast waveform generation can simplify sweep or stepped-frequency control, and the 25-bit fixed modulus supports fine command resolution. The synthesizer is used ahead of amplification, filtering, and power amplification because its output is not itself the transmitter's final RF power stage. Loop-filter design and reference routing remain critical to phase noise, spurious performance, and repeatability.

📈

Fast Frequency Sweep Generator

ADF4169WCCPZ can form the core of a fast frequency sweep generator for RF test, radar simulation, or instrumentation. Fast and slow waveform generation allow the device to support different controlled ramp profiles, while fractional-N resolution supports precise endpoint and step placement. The synthesizer produces a coherent programmable output that can be filtered, amplified, and routed to the test path. For reliable sweeps, tune the loop-filter components and charge-pump settings for the required settling behavior, provide a clean reference, and verify that modulation limits and lock performance cover the intended sweep rate.

📶

Communications RF Signal Source

ADF4169WCCPZ can support programmable RF signal-source blocks in communications equipment where a compact fractional-N synthesizer is needed. Its 13.5 GHz operating range, direct-modulation capability, and sub-hertz resolution provide flexible frequency generation from a stable reference. A practical implementation places the device in a phase-locked loop, filters the charge-pump output, and routes the synthesized signal through matching and gain stages before modulation or transmission. Designers must evaluate phase noise, reference spur levels, output drive, supply sensitivity, and register-level control against the communication standard rather than relying only on maximum-frequency ratings.

🖥️

RF Test and Measurement Instrument

ADF4169WCCPZ is appropriate for compact laboratory or embedded test equipment requiring programmable microwave-frequency generation. One synthesizer output can serve as a tunable source for filters, amplifiers, receivers, or frequency-conversion structures, while direct modulation adds flexibility for stimulus modulation. Fast waveform generation supports stepped or swept measurements, and the 25-bit fixed modulus allows finely commanded frequencies. Instrument designers should budget PCB area for the 24-lead LFCSP-WQ device, use a low-noise reference, preserve the recommended ground topology, and calibrate output power and frequency accuracy after the external RF chain.

🔧

Precision RF Frequency Synthesizer

ADF4169WCCPZ is well matched to precision RF frequency-synthesis blocks that require fine command granularity. The 25-bit fixed modulus enables sub-hertz frequency resolution, while the low-noise digital phase-frequency detector and precision charge pump support a phase-locked-loop implementation. The 13.5 GHz capability permits synthesis of high-frequency test tones or conversion references without relying on a large discrete divider chain. For best results, select a low-phase-noise reference, calculate the loop filter for the target bandwidth, keep the loop-filter layout compact, and verify fractional spur behavior under the required output frequency and modulation conditions.

Where can I buy ADF4169WCCPZ online?
The ADF4169WCCPZ can be requested through the Request a Quote form on this page for current availability, order confirmation, and delivery scheduling. The device is identified as a 13.5 GHz, one-output fractional-N frequency synthesizer in a 24-lead 4 mm × 4 mm LFCSP-WQ package. Its ordering code should be submitted exactly as ADF4169WCCPZ so the supplier can match the package, qualification suffix, and delivery format.
What is the price of ADF4169WCCPZ?
Use the Request a Quote form on this page to obtain the current commercial terms for ADF4169WCCPZ. The product is a 13.5 GHz fractional-N PLL with one output, direct modulation, fast and slow waveform generation, and a 25-bit fixed modulus. The quote request preserves the exact MPN so that the requested component and package can be reviewed together.
What is the lead time for ADF4169WCCPZ?
Request the current lead time through the Request a Quote form on this page, including the required quantity and delivery destination. Lead time can vary with available inventory, manufacturing status, and order configuration. The confirmed device identity is ADF4169WCCPZ, a 13.5 GHz one-output fractional-N frequency synthesizer supplied in a 24-lead 4 mm × 4 mm LFCSP-WQ package.
Is ADF4169WCCPZ in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a product listing. The qualified component is ADF4169WCCPZ, with a 13.5 GHz maximum synthesizer frequency, one RF output, and a 24-lead LFCSP-WQ package. Include the required quantity, reel or tray preference, and target delivery date in the request.
What is the best drop-in replacement for ADF4169WCCPZ?
ADF4169CCPZ is the closest confirmed same-family candidate because it uses the ADF4169 fractional-N architecture and the same 24-lead LFCSP format. The principal documented distinction is the W qualification suffix on ADF4169WCCPZ. Before substitution, verify that the non-W part meets the required automotive or environmental qualification criteria; a similar package alone does not establish full qualification equivalence.
Can ADF4169CCPZ replace ADF4169WCCPZ?
ADF4169CCPZ can be considered for a pin-level review because it is a member of the same ADF4169 family and is identified as a direct pin-compatible family replacement. However, ADF4169WCCPZ includes the W qualification suffix, so the replacement should only be approved after confirming that the required automotive qualification, temperature grade, and production requirements are satisfied. The 13.5 GHz architecture and 24-lead LFCSP format are retained.
Is ADF4169WCCPZ the same as ADF4159CCPZ?
No. ADF4159CCPZ and ADF4169WCCPZ both use 24-lead LFCSP packages and offer related fractional-N synthesis functions, but they are not documented by Analog Devices as pin-compatible drop-in replacements. ADF4159CCPZ is identified as a 13 GHz fractional-N synthesizer, while ADF4169WCCPZ reaches 13.5 GHz. Their different PLL implementations and features require schematic and firmware-level comparison before substitution.
ADF4169WCCPZ vs ADF4169CCPZ: which is better for automotive use?
ADF4169WCCPZ is the more appropriate starting point when automotive qualification is required because its ordering code contains the W qualification suffix. ADF4169CCPZ belongs to the same ADF4169 family and may share the 24-lead LFCSP footprint, but the omitted W suffix represents a meaningful qualification distinction. Engineers should verify the exact qualification class and operating-temperature requirements in Analog Devices documentation before approving the lower-suffix part.
When should I choose ADF4169WCCPZ over ADF4169CCPZ?
Choose ADF4169WCCPZ when the required procurement specification calls for the W-qualified ADF4169 configuration, particularly in automotive-oriented programs. Both devices provide the same 13.5 GHz fractional-N synthesizer family context and 24-lead LFCSP package, but the ordering suffix matters. Select ADF4169CCPZ only when its qualification, temperature grade, and lifecycle documentation satisfy the complete system requirement.
Is ADF4169WCCPZ suitable for FMCW radar?
Yes, ADF4169WCCPZ is suitable for FMCW radar frequency-generation stages because it combines a 13.5 GHz fractional-N synthesizer, direct modulation, and fast and slow waveform generation. These functions support programmable local-oscillator or reference-signal generation with rapid controlled frequency movement. RF band compatibility, loop-filter design, reference requirements, and output-chain integration must still be verified against the individual radar system.
What are the key specifications of ADF4169WCCPZ that engineers should know?
ADF4169WCCPZ is a 13.5 GHz fractional-N frequency synthesizer with one output, direct modulation, fast and slow waveform generation, and a 25-bit fixed modulus that allows sub-hertz frequency resolution. According to the Analog Devices ADF4169 datasheet, it includes a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, and fractional interpolator. It is packaged in a 24-lead 4 mm × 4 mm LFCSP-WQ.
What can replace ADF4169WCCPZ?
ADF4169CCPZ is the confirmed same-family replacement candidate for ADF4169WCCPZ because it shares the ADF4169 fractional-N architecture and 24-lead LFCSP format. Its W suffix is absent, so qualification requirements must be checked before approval. ADF4159CCPZ offers similar functionality in the same general package family but is not documented as a direct pin-compatible replacement, so it requires redesign-level evaluation.
What is the best alternative-brand equivalent for ADF4169WCCPZ?
No cross-brand drop-in equivalent is established by the available cross-reference information. A valid replacement must match the 13.5 GHz operating requirement, 25-bit fractional-N behavior, modulation and waveform functions, 24-lead LFCSP footprint, and pin-level electrical characteristics. Similar maximum frequency or package dimensions are insufficient because charge-pump behavior, register architecture, reference handling, and loop dynamics can differ materially.
Where to download the ADF4169WCCPZ datasheet PDF?
The official ADF4169 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4169.pdf. It is the primary document for confirming register programming, electrical limits, reference inputs, loop-filter guidance, pin descriptions, package dimensions, and recommended application layouts. Use the PDF and the Analog Devices product page together when evaluating the exact WCCPZ ordering configuration.
Where can I find the ADF4169WCCPZ pinout and package information?
Use the pin-description table and package drawings in the official Analog Devices ADF4169 datasheet for the 24-lead LFCSP-WQ configuration. The distributor description confirms a 24-lead 4 mm × 4 mm LFCSP-WQ package, while the datasheet provides the authoritative signal assignments, exposed-pad requirements, and dimensions. Confirm those details against the exact ordering code before assigning PCB tracks or applying solder.

엔지니어링 참조 데이터: ADF4169WCCPZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose ADF4169WCCPZ when the design needs the ADF4169 13.5 GHz fractional-N architecture, direct modulation, fast and slow waveform generation, and the W qualification suffix. ADF4169CCPZ is the closest same-family drop-in candidate because it retains the 13.5 GHz architecture and 24-lead LFCSP-WQ format, but it must be approved against the required qualification class. ADF4159CCPZ may be useful for functional design comparison, but its 13 GHz limit and lack of documented pin compatibility make it a redesign candidate rather than a direct replacement. For applications requiring a different manufacturer's equivalent, evaluate the entire PLL control interface, register map, electrical limits, reference architecture, and package pinout rather than matching frequency and package size alone.

대체품과의 비교

파라미터 이 제품 ADF4169CCPZ
Brand Analog Devices Analog Devices
Package 24-lead LFCSP-WQ, 4 mm × 4 mm 24-lead LFCSP-WQ, 4 mm × 4 mm
Maximum Synthesizer Frequency 13.5 GHz 13.5 GHz
PLL Architecture Fractional-N Fractional-N
Fixed Modulus 25 bit 25 bit
Frequency Resolution Sub-hertz Sub-hertz
Qualification Suffix W suffix present W suffix absent
Modulation Capability Direct modulation Direct modulation
Waveform Generation Fast and slow waveform generation Fast and slow waveform generation

주요 차별점

  • W-qualified ordering option (vs ADF4169CCPZ)
  • Sub-hertz fractional-N resolution (vs ADF4169CCPZ)
  • Integrated direct modulation and waveform generation (vs ADF4159CCPZ)

설계 노트

Use the Analog Devices recommended PCB layout and preserve a continuous ground reference beneath and around the 24-lead LFCSP-WQ device. Place the loop-filter components and decoupling capacitors close to their associated pins, minimize loop area, and avoid routing fast digital control signals beneath sensitive RF or charge-pump nodes. Confirm exposed-pad connection and solder requirements in the package drawing before fabrication.

Do not select ADF4169CCPZ solely because it uses the same 24-lead LFCSP footprint as ADF4169WCCPZ. The W suffix is the key qualification distinction and must satisfy the automotive or environmental requirements of the design. Likewise, ADF4159CCPZ reaches 13 GHz and is not documented as a direct pin-compatible replacement, so a 3.8% lower maximum frequency plus potentially different PLL behavior requires schematic and firmware review.

Follow the manufacturer requirements for analog and digital supply decoupling, including the component values and placement specified in the ADF4169 datasheet. Keep supply traces short and provide a low-noise, stable reference source because reference phase noise and supply disturbance can directly influence the synthesized output. Validate supply sequencing and operating limits against the exact WCCPZ configuration before enabling the RF output.

Treat the RF output path and reference input as controlled-impedance RF structures. Use the package reference plane and manufacturer layout guidance for breakout routing, and place matching or filtering components where their parasitics can be characterized. For fractional-N operation, evaluate reference spurs and phase noise across the intended output range rather than measuring only the carrier frequency or a single intermediate-frequency condition.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The W suffix identifies an ordering variant associated with qualification, but the exact compliance declarations and AEC-Q100 status must be confirmed in the official Analog Devices product documentation.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADF4169WCCPZ datasheet ADF4169WCCPZ pinout ADF4169WCCPZ datasheet pdf ADF4169WCCPZ equivalent ADF4169WCCPZ replacement ADF4169WCCPZ drop-in replacement ADF4169WCCPZ cross reference ADF4169WCCPZ vs ADF4169CCPZ ADF4169WCCPZ vs ADF4159CCPZ ADF4169WCCPZ footprint Analog Devices ADF4169WCCPZ ADF4169WCCPZ 13.5GHz PLL ADF4169WCCPZ FMCW radar ADF4169WCCPZ price ADF4169WCCPZ stock

관련 부품 & 용어

Analog Devices ADF4169WCCPZ ADF4169CCPZ ADF4159CCPZ fractional-N frequency synthesizer frequency synthesizer phase-locked loop PLL clock and timing IC integrated circuit semiconductor direct modulation fast waveform generation slow waveform generation 25-bit fixed modulus sub-hertz frequency resolution digital phase-frequency detector PFD precision charge pump programmable reference divider fractional interpolator 24-lead LFCSP-WQ LFCSP package family surface-mount package FMCW radar RF synthesis loop filter phase noise
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기