ADP1031ACPZ-3-RL7 - Isolated PMU with 7 Digital Isolators | Analog Devices
부품 번호: ADP1031ACPZ-3-RL7 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.75 | $8.75 |
| 10 | $7.92 | $79.20 |
| 100 | $6.85 | $685.00 |
| 500 | $6.12 | $3,060.00 |
| 1,000 | $5.48 | $5,480.00 |
ADP1031ACPZ-3-RL7 개요
An isolated micropower management unit (PMU) is a power management IC that integrates multiple DC-DC converters and digital isolators to provide isolated power and signal transfer across an isolation barrier. It combines the functions of a flyback converter, an inverting converter, and a buck converter, along with digital isolators, into a single package. This integration reduces board space, simplifies design, and improves reliability compared to discrete solutions. The ADP1031 belongs to the family of isolated power management ICs, which are essential in systems requiring safety isolation, noise immunity, and multiple isolated supply rails.
Key features of the ADP1031ACPZ-3-RL7 include a wide input voltage range, three isolated outputs (one positive, one negative, and one buck), and integrated digital isolators with up to 100 Mbps data rate. The device operates from a 4.5V to 60V input supply, making it suitable for industrial 24V buses and other high-voltage rails. The flyback regulator provides an isolated output up to 3.3V or 5V, the inverting regulator provides a negative output down to -5V, and the buck regulator provides a positive output down to 3.3V. The digital isolators provide reinforced isolation up to 5 kV rms, ensuring safe signal transfer across the isolation barrier.
Technically, the ADP1031 uses a proprietary architecture that combines a primary-side flyback controller with secondary-side regulation, achieving high efficiency and low EMI. The device includes overvoltage protection (OVP) on the inverting regulator, which monitors the FB3 pin and stops switching if the voltage falls below VFB3 by 10%. This protects downstream circuitry from excessive negative voltages. The device also features soft-start, short-circuit protection, and thermal shutdown, ensuring robust operation in harsh environments.
Typical applications include isolated data acquisition systems, industrial PLCs, motor control, and power monitoring. The ADP1031 is ideal for systems that require isolated power and data transfer, such as isolated SPI communication between a microcontroller and an ADC. Its integrated digital isolators eliminate the need for separate isolator ICs, reducing component count and board space.
When designing with the ADP1031, ensure proper PCB layout with adequate spacing for isolation, and place decoupling capacitors close to the power pins. The device requires an external transformer for the flyback converter, and the selection of the transformer is critical for efficiency and isolation rating. Refer to the datasheet for recommended transformer specifications and layout guidelines.
드롭인 대체품: ADP1031ACPZ-3-RL7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ADP1031ACPZ-3-R7
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADP1031ACPZ-3
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADP1031ACPZ-3-RL7 최대 정격 & 전기적 특성
| 입력 전압 범위 | 4.5 V to 60 V |
| Number of Isolated Outputs | 3 |
| Flyback Output Voltage | 3.3 V or 5 V |
| Inverting Output Voltage | -5 V |
| Buck Output Voltage | 3.3 V |
| Digital Isolators | 7 (4 SPI + 3 GPIO) |
| Isolation Rating | 5 kV rms |
| 데이터 속도 | 100 Mbps |
| 패키지 | 41-LFCSP (9x7 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +125C |
| RoHS 상태 | Compliant |
| Overvoltage Protection | Yes (on inverting regulator) |
| 소프트 스타트 | Yes |
| 열 차단 | Yes |
ADP1031ACPZ-3-RL7 핀 구성
| 핀 1 | VIN — Input supply voltage |
| 핀 2 | GND — Ground |
| 핀 3 | VOUT1 — Flyback output |
| 핀 4 | VOUT2 — Inverting output |
| 핀 5 | VOUT3 — Buck output |
| 핀 6 | FB1 — Feedback for flyback |
| 핀 7 | FB2 — Feedback for inverting |
| 핀 8 | FB3 — Feedback for buck |
| 핀 9 | EN — Enable pin |
| 핀 10 | SPI_CLK — SPI clock input |
| 핀 11 | SPI_MOSI — SPI data input |
| 핀 12 | SPI_MISO — SPI data output |
| 핀 13 | SPI_CS — SPI chip select |
| 핀 14 | GPIO1 — General purpose digital isolator |
| 핀 15 | GPIO2 — General purpose digital isolator |
| 핀 16 | GPIO3 — General purpose digital isolator |
일반적인 애플리케이션
ADP1031ACPZ-3-RL7 적합 용도: 6 애플리케이션s: Isolated Data Acquisition, Industrial PLC I/O Modules, Isolated Power Supply Monitoring, Motor Control Drives, Isolated SPI Communication, Battery Management Systems.
Isolated Data Acquisition
The ADP1031ACPZ-3-RL7 provides isolated power and SPI isolation for data acquisition systems. Its 5 kV rms isolation and 100 Mbps SPI data rate ensure clean, safe communication between a microcontroller and an isolated ADC. The integrated flyback and buck converters supply the ADC and digital isolator rails, eliminating the need for separate power and isolation components. This reduces board space and improves system reliability in industrial monitoring and control applications.
추천
Industrial PLC I/O Modules
In PLC I/O modules, the ADP1031ACPZ-3-RL7 generates isolated power rails for field-side sensors and actuators, while its digital isolators transfer control signals across the isolation barrier. The wide 4.5V to 60V input range accommodates various field supply voltages, and the integrated protection features ensure robust operation in harsh industrial environments. This integration simplifies the design of multi-channel I/O modules and reduces component count.
추천
Isolated Power Supply Monitoring
The ADP1031ACPZ-3-RL7 is used in isolated power supply monitoring systems to provide isolated power to monitoring circuits and to isolate communication with a host controller. Its three isolated outputs can power a microcontroller, an ADC, and a communication interface simultaneously. The integrated digital isolators ensure safe data transfer across the isolation barrier, enabling accurate voltage and current monitoring in high-voltage systems.
추천
Motor Control Drives
In motor control drives, the ADP1031ACPZ-3-RL7 provides isolated power for gate drivers and feedback circuits, while its digital isolators transmit PWM and fault signals across the isolation barrier. The high isolation rating and wide input voltage range make it suitable for industrial drives operating from 24V to 60V buses. The integrated buck converter can power the control logic, reducing the need for additional power supplies.
추천
Isolated SPI Communication
The ADP1031ACPZ-3-RL7 is ideal for isolated SPI communication between a host processor and peripheral devices. Its four high-speed SPI isolators support data rates up to 100 Mbps, enabling fast and reliable data transfer. The integrated power converters provide isolated power to the peripheral side, eliminating the need for separate isolated power supplies. This makes it a compact solution for isolated sensor interfaces and communication links.
추천
Battery Management Systems
In battery management systems (BMS), the ADP1031ACPZ-3-RL7 provides isolated power for cell monitoring circuits and isolates communication between the battery pack and the host controller. Its wide input voltage range accommodates varying battery voltages, and the integrated digital isolators ensure safe data transfer in high-voltage environments. The compact LFCSP package is suitable for space-constrained BMS modules.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADP1031ACPZ-3-RL7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADP1031ACPZ-3-R7 | ADP1031ACPZ-3 | ADuM3470 | ADuM4470 |
|---|---|---|---|---|---|
| Package | 41-LFCSP (9x7) | 41-LFCSP (9x7) | 41-LFCSP (9x7) | 20-SOIC | 20-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Input Voltage Range | 4.5V to 60V | 4.5V to 60V | 4.5V to 60V | 3.0V to 5.5V | 3.0V to 5.5V |
| Number of Isolated Outputs | 3 | 3 | 3 | 1 | 1 |
| Digital Isolators | 7 | 7 | 7 | 4 | 4 |
| Isolation Rating | 5 kV rms | 5 kV rms | 5 kV rms | 2.5 kV rms | 2.5 kV rms |
| Data Rate | 100 Mbps | 100 Mbps | 100 Mbps | 25 Mbps | 25 Mbps |
| RoHS | Compliant | Compliant | Compliant | Compliant | Compliant |
주요 차별점
- Integrated 7 digital isolators (vs ADuM3470)
- Three isolated outputs (vs ADuM3470)
- Higher isolation rating (vs ADuM3470)
설계 노트
For the ADP1031ACPZ-3-RL7, ensure proper PCB layout with adequate spacing for isolation. The flyback transformer should be placed close to the device to minimize parasitic inductance. Use a solid ground plane under the primary side and a separate ground plane for the secondary side, with a clearance of at least 8 mm for 5 kV isolation. Place decoupling capacitors (0.1 uF and 10 uF) close to the VIN and VOUT pins.
The ADP1031ACPZ-3-RL7 can dissipate significant power at high input voltages and load currents. The 41-LFCSP package has a thermal resistance of approximately 25 C/W (theta_JA). For reliable operation, ensure adequate copper area on the PCB for heat sinking. If the device is expected to dissipate more than 2W, consider adding thermal vias and a larger copper pour on the bottom layer.
A common pitfall is incorrect transformer selection for the flyback converter. The transformer must have the correct turns ratio and isolation rating to achieve the desired output voltage and isolation. Also, ensure the feedback resistors for the inverting regulator are properly set to avoid triggering the OVP circuit, which stops switching if the FB3 voltage falls below VFB3 by 10%. Refer to the datasheet for recommended transformer specifications.
규정 준수 정보
RoHS compliant per distributor listings. No AEC-Q100 qualification indicated for this part.
