ADP5588ACPZ-R7 - 18-GPIO Mobile Keypad Controller | Analog Devices
부품 번호: ADP5588ACPZ-R7 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.6553 | $3.66 |
| 10 | $3.49 | $34.90 |
| 100 | $3.18 | $318.00 |
| 500 | $2.84 | $1,420.00 |
| 1,000 | $2.57 | $2,570.00 |
| 3,000 | $2.21 | $6,630.00 |
ADP5588ACPZ-R7 개요
An I/O expander is an interface IC that extends the number of digital input and output lines available to a host controller. A keypad controller adds matrix-scanning and event detection, while an I2C interface IC connects compact peripheral logic to a processor bus. Within the hierarchy of interface ICs, this device reduces wiring and pin demand in mobile, wearable, and compact embedded systems.
Key features include 18 GPIOs configurable as inputs, outputs, keypad rows, or keypad columns; two dedicated light-sensor inputs; I2C register-read autoincrement; programmable pull-ups; keypad locking; an open-drain interrupt output; and key-press and key-release interrupts. The GPI interrupt also supports programmable levels. These functions allow one controller to handle both a large keypad and additional discrete interface signals.
The ADP5588 is designed for low-voltage mobile platforms. Verified manufacturer data specifies operation from 1.8 V to 3.0 V, while one distributor summary separately emphasizes 3.0 V operation. The compact 24-LFCSP-WQ package is suited to space-constrained boards, but its fine pitch requires careful PCB layout and assembly. Its I2C connection reduces host pins, although firmware must configure GPIO direction, pull-ups, interrupt behavior, and keypad dimensions.
Typical uses include QWERTY keypad modules, handheld calculators, mobile accessories, wearable controls, light-sensor-equipped keypads, industrial key-entry panels, and custom HMI boards. The device can expand a processor with limited GPIO while providing dedicated key events through its interrupt output.
Designers should verify the complete pinout, exposed-pad connection, address configuration, and supported I2C clock and voltage limits in the manufacturer datasheet. Place the device close to the keypad matrix, provide clean local decoupling, route I2C signals away from switching nodes, and validate signal levels and pull-ups across the complete system voltage range.
This page consolidates verified distributor availability, manufacturer functionality, packaging data, purchasing information, and application guidance. It distinguishes documented functions from parameters that still require confirmation, helping engineers evaluate the ADP5588ACPZ-R7 without inferring missing electrical values.
드롭인 대체품: ADP5588ACPZ-R7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADP5588ACPZ-R7 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, GPIO Configuration, Host Interface, Keypad Matrix.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청ADP5588ACPZ-R7 사양
| Product Type | Mobile I/O expander and QWERTY keypad controller |
| GPIO Count | 18 GPIO |
| Keypad Matrix Capability | 10 × 8 keypad matrix |
| GPIO Configuration | Configurable as GPI, GPO, keypad row, or keypad column |
| Light-Sensor Inputs | 2 dedicated inputs on C8 and C9 |
| Host Interface | I2C |
| I2C Register Read | Autoincrement |
| Operating Voltage Range | 1.8 V to 3.0 V |
| Keypad Lock | Supported |
| Interrupt Output | Open-drain |
| Key Interrupts | Key-press and key-release interrupts |
| GPI Interrupt | Programmable level |
| Programmable Pull-Ups | Supported |
| Key Event Counter | Supported |
| 패키지 | 24-LFCSP-WQ, 4 mm × 4 mm |
| 실장 유형 | Surface mount |
| Manufacturer Lifecycle Designation | Production |
ADP5588ACPZ-R7 24-lfcsp-wq, 4 mm × 4 mm 핀 구성 가이드
ADP5588ACPZ-R7(24-lfcsp-wq, 4 mm × 4 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADP5588ACPZ-R7.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADP5588ACPZ-R7 적합 용도: 7 애플리케이션s: Mobile QWERTY Keypad, Wearable Control Interface, Industrial Key-Entry Panel, Handheld Calculator, Mobile Accessory and Dock, Light-Sensor-Equipped Keypad, Custom HMI and Service Panel.
Mobile QWERTY Keypad
The ADP5588ACPZ-R7 fits a mobile QWERTY keypad because its keypad controller can support a matrix up to 10 × 8 while sharing 18 configurable GPIOs for auxiliary controls. The host communicates through I2C instead of dedicating many processor pins to every key line. Key-press and key-release interrupts reduce unnecessary polling, while keypad locking and programmable pull-ups support robust mechanical and electrical behavior.
추천
Wearable Control Interface
The ADP5588ACPZ-R7 is useful in wearables that need more controls than the host MCU has available. Its 18 GPIOs can represent switches, menu inputs, or accessory signals, while the keypad functions support compact button matrices. The 1.8 V to 3.0 V operating range aligns with many low-voltage mobile systems, and the 4 mm × 4 mm package helps preserve board area. Battery-life decisions should include the device's verified operating current before final sizing.
추천
Industrial Key-Entry Panel
The ADP5588ACPZ-R7 can serve as the keypad front end for an industrial key-entry panel with many physical inputs. The 10 × 8 keypad capability covers larger matrices, and the programmable GPIOs can add lock indicators, status lamps, or auxiliary controls. I2C register autoincrement simplifies host access to sequential keypad data, while key-event interrupts help the controller respond without continuously scanning every row and column.
추천
Handheld Calculator
A calculator keypad is a natural fit for the ADP5588ACPZ-R7 because it requires a dense matrix of keys plus limited system I/O. The controller handles scanning and decoding locally, reducing MCU pin count and firmware burden. Its key-press and key-release events, keypad lock capability, and programmable pull-ups support robust user interaction. For very low-power products, verify quiescent and active current from the complete manufacturer electrical data before finalizing the battery budget.
추천
Mobile Accessory and Dock
The ADP5588ACPZ-R7 can add a compact keypad or control panel to a mobile accessory or docking product without consuming a large number of host GPIO pins. Its I2C interface is appropriate for a short, low-voltage embedded bus, while the 18-GPIO bank supports buttons, indicators, and accessory-control signals. The exact I2C address and bus timing must be taken from the manufacturer documentation, especially when multiple expandable peripherals share the same bus.
추천
Light-Sensor-Equipped Keypad
The ADP5588ACPZ-R7 is appropriate when a keypad must also monitor light-sensor inputs. Verified device information identifies dedicated C8 and C9 inputs, while the remaining GPIO bank supports keypad rows, columns, and other digital controls. This arrangement can consolidate a touch-like or illuminated keypad interface in one package. Validate analog or digital sensor signal requirements separately because the supplied data does not specify sensor transfer characteristics or electrical limits for those channels.
추천
Custom HMI and Service Panel
The ADP5588ACPZ-R7 fits custom human-machine interface panels that combine a keypad with a small set of status or service inputs. Its programmable GPIOs allow rows, columns, discrete controls, and interrupt-capable lines to share the same controller. The I2C autoincrement register-read feature can simplify sequential keypad-data retrieval, and the open-drain interrupt output provides a flexible host notification path. Panel-specific ESD, connector, and grounding requirements must be engineered separately.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADP5588ACPZ-R7 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 24-LFCSP-WQ (4 mm × 4 mm) |
| Brand | Analog Devices |
| Product Type | Mobile I/O expander and QWERTY keypad controller |
| GPIO Count | 18 GPIO |
| Keypad Matrix | Up to 10 × 8 |
| Light-Sensor Inputs | 2 dedicated inputs on C8 and C9 |
| Operating Voltage | 1.8 V to 3.0 V |
| Host Interface | I2C |
| Interrupt Output | Open-drain |
| Special Features | Keypad lock, key event counter, programmable pull-ups, I2C register autoincrement |
| Price Reference | $3.6553 starting price from LCSC as of 2026-10-23 |
주요 차별점
- Integrated keypad matrix controller (vs PCF8574PW)
- Wider GPIO count for keypad and auxiliary control (vs PCA9557D)
- Dedicated light-sensor inputs (vs PCF8574PW)
- Low-voltage mobile integration (vs PCA9557D)
설계 노트
Treat the 24-LFCSP-WQ footprint as a fine-pitch layout constraint and follow the exact Analog Devices land pattern and exposed-pad guidance. Place decoupling close to the supply pins, keep the I2C route short, and provide adequate return-path continuity. Verify the package drawing and assembly process before committing the PCB footprint, because distributor abbreviations can describe the same family with different package-detail conventions.
Route keypad row and column traces with attention to capacitive loading, crosstalk, and switch bounce. The ADP5588 handles scanning and decoding, but long or noisy matrix traces can still affect signal integrity. Keep the controller near the keypad connector where practical, separate I2C and interrupt routing from switching-power paths, and use pull-up values and rise-time limits from the manufacturer documentation and the actual bus capacitance.
Do not substitute a generic I2C GPIO expander without checking the complete ADP5588 register map, interrupt polarity, keypad configuration, light-sensor channels, and 24-LFCSP-WQ footprint. The device also has a 1.8 V to 3.0 V operating range; level-shift any bus or signal that falls outside that range. Validate firmware initialization, key lock behavior, pull-ups, and wake-up requirements on hardware before production release.
The supplied verified material confirms a 1.8 V to 3.0 V operating range but does not provide verified active or quiescent current values. Therefore, calculate battery and regulator headroom using the complete manufacturer electrical specifications rather than estimated assumptions. Confirm the external regulator tolerance, I2C pull-up current, keypad drive current, and any light-sensor load during worst-case operation.
The I2C bus and open-drain interrupt lines depend on correct pull-up implementation and compatible voltage levels. Confirm the device's address configuration and bus timing against the host MCU, and ensure interrupt polarity and debounce behavior match firmware expectations. Keep pull-up traces short where possible and account for capacitance, rise time, pull-up current, and any level-shifter propagation delay.
규정 준수 정보
The supplied verified data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for ADP5588ACPZ-R7. Obtain current manufacturer declarations before using this part in regulated production.
