ADS8327IPW - 16-Bit 500kSPS SAR ADC | Texas Instruments
부품 번호: ADS8327IPW ✓ 활성ADS8327IPW 개요
An ADC converts a continuous analog voltage into a numeric code for measurement, control, or communication. The ADS8327 belongs to the SAR ADC family within the broader data-converter and signal-processing hierarchy. SAR conversion repeatedly compares the sampled input with internal references and applies successive bit decisions. This architecture is well suited to instrumentation, industrial control, and embedded systems that require deterministic sampling without the complexity of a continuously operating conversion engine.
The ADS8327 accepts a unipolar input and provides a nominal conversion rate of 500 kSPS. Its 2.7 V to 5.5 V analog and digital supply range supports both 3.3 V and 5 V systems. The device also includes a serial interface suitable for connecting to embedded processors, field-programmable logic, or data-acquisition controllers. These characteristics make the ADS8327 useful when design priority is placed on resolution, throughput, compact packaging, and straightforward serial integration.
Internally, the ADS8327 uses a 16-bit capacitor-based SAR converter with an inherent sample-and-hold function. This supports repeatable sampled measurement while freeing the host processor to handle filtering, scaling, calibration, and data transfer. The serial output reduces the number of parallel signal lines needed on compact boards, while the 16-pin TSSOP package simplifies assembly in conventional surface-mount production processes.
Typical applications include precision analog measurement, industrial sensor acquisition, process-control loops, laboratory instrumentation, and embedded data loggers. In a sensor interface, the ADC can digitize the output of a conditioned transducer before the controller evaluates thresholds or performs control calculations. In an industrial system, its 500-kSPS capability can accommodate fast measurement loops, provided that the front-end settling time and acquisition timing are designed correctly.
A critical design consideration is the relationship among input bandwidth, acquisition time, conversion time, and source impedance. The active front-end should settle the sampling capacitor within the converter's acquisition interval, and the analog input must remain within the specified operating range. Reference and supply bypass placement close to the device also helps preserve measurement repeatability. Use the manufacturer pin-description table and timing diagrams when assigning PCB nets and calculating sampling-cycle timing.
This page combines the manufacturer's principal ADC specifications, sourcing guidance, package information, replacement analysis, and practical design notes. It also distinguishes verified drop-in choices from options that require a different footprint, interface review, or changed supply arrangement, helping engineers make a controlled redesign rather than relying only on nominal resolution and speed.
드롭인 대체품: ADS8327IPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ADS8327IBPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADS8327IPWRG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADS8327IPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADS8327IPW 최대 정격 & 전기적 특성
| 분해능 | 16 bit |
| Conversion Rate | 500 kSPS |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Input Architecture | Single unipolar input |
| Converter Architecture | Successive-approximation register (SAR) |
| Internal Conversion Mechanism | Capacitor-based 16-bit SAR with inherent sample-and-hold |
| 인터페이스 | High-speed, wide-voltage serial interface |
| 패키지 | 16-pin TSSOP |
| 실장 유형 | Surface mount |
| Number of Analog Inputs | 1 input |
| Analog Input Polarity | Unipolar |
| Output Resolution | 16 bit |
| Sample-and-Hold | Inherent |
ADS8327IPW 16-pin tssop 핀 구성 가이드
ADS8327IPW(16-pin tssop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ADS8327IPW.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADS8327IPW 적합 용도: 6 애플리케이션s: Industrial Sensor Acquisition, Process Control Monitoring, Laboratory Instrumentation, Embedded Data Loggers, Conditioned Transducer Interfaces, Battery-Powered Portable Measurement.
Industrial Sensor Acquisition
ADS8327IPW fits industrial sensor acquisition when a conditioned unipolar signal must be digitized at 16-bit resolution and up to 500 kSPS. The capacitor-based SAR converter samples the analog input and converts it through a high-speed serial interface, leaving the controller available for filtering and control calculations. Place the transducer, amplifier, or bridge conditioner close enough to the ADC that the output settles within the acquisition interval. The 2.7 V to 5.5 V range supports common 3.3 V and 5 V industrial controller rails, while the 16-pin TSSOP package keeps the analog subsystem compact. Careful reference decoupling and a low-impedance source are essential for repeatable measurements.
추천
Process Control Monitoring
ADS8327IPW is suitable for process-control monitoring loops that convert a unipolar command or feedback voltage into a digital value for a controller. Its nominal 500-kSPS conversion rate provides ample throughput for many feedback measurements, while 16-bit resolution preserves fine signal detail. The SAR architecture supports sampled measurement with an inherent sample-and-hold stage and a serial interface that reduces wiring compared with a parallel ADC. For closed-loop equipment, verify the complete acquisition and conversion interval against the required control latency. Use local bypass capacitors at the supply and reference pins and isolate high-current switching nodes from the analog input path.
추천
Laboratory Instrumentation
ADS8327IPW can form the measurement core of compact laboratory instruments that digitize a conditioned unipolar voltage and transfer results through a serial link. Its 16-bit resolution supports detailed readings, while the 500-kSPS rate permits rapid acquisition of changing waveforms or repeated measurements. The serial architecture reduces connector count and board area, making the 16-pin TSSOP useful in portable or modular test equipment. A practical implementation should scale the sensor output into the ADC input range, stabilize the reference, and define calibration for offset, gain, and noise. If the source impedance is high, include an appropriate buffer rather than relying on the source to charge the sampling capacitor rapidly.
추천
Embedded Data Loggers
ADS8327IPW suits embedded data loggers that periodically or continuously record an analog sensor value. The 2.7 V to 5.5 V supply range accommodates embedded processor rails, and the serial interface minimizes the number of connections between the converter and the logging controller. At a nominal 500-kSPS, the ADC can support substantially more samples than many logging systems require, allowing developers to select a lower effective rate when recording bandwidth is limited. Energy-efficient system design should inhibit or power-gate unused circuitry where the application permits. Store calibration metadata with each record so later analysis can distinguish sensor variation from converter or front-end error.
추천
Conditioned Transducer Interfaces
ADS8327IPW is appropriate for conditioned strain, temperature, pressure, and position sensors whose outputs have already been converted into a safe unipolar voltage. The 16-bit conversion resolution can preserve small changes in the conditioned signal, while the single-input SAR architecture keeps the interface straightforward. The analog conditioning stage should provide low output impedance and settle the ADC sampling network before conversion begins. Keep sensitive traces short, return their ground current away from digital switching paths, and use a quiet reference arrangement. Where the transducer can operate in a bidirectional bridge, a separate bipolar-capable converter may be more appropriate because the ADS8327 input is specified as unipolar.
추천
Battery-Powered Portable Measurement
ADS8327IPW can support portable battery-powered measurement systems that need accurate conversion in a compact 16-pin TSSOP package. Its 2.7 V minimum supply voltage permits operation from suitably regulated lower-voltage rails, and the serial interface reduces connection count to a low-power controller. The 500-kSPS maximum conversion rate allows the application to reduce the actual sampling frequency when energy use is more important than maximum throughput. Estimate average consumption from the actual sample rate and duty cycle rather than from peak conversion activity. Power sequencing should keep the analog and digital rails within their permitted limits, and the input buffer should remain disabled when no measurement is required.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADS8327IPW — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADS8327IBPWR | ADS8327IPWRG4 | ADS8327IPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit |
| Conversion Rate | 500 kSPS | 500 kSPS | 500 kSPS | 500 kSPS |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Input Architecture | Single unipolar input | Single unipolar input | Single unipolar input | Single unipolar input |
| Converter Architecture | 16-bit capacitor-based SAR | 16-bit capacitor-based SAR | 16-bit capacitor-based SAR | 16-bit capacitor-based SAR |
| Sample-and-Hold | Inherent | Inherent | Inherent | Inherent |
| Interface | High-speed, wide-voltage serial interface | High-speed, wide-voltage serial interface | High-speed, wide-voltage serial interface | High-speed, wide-voltage serial interface |
주요 차별점
- Direct ADS8327-family footprint compatibility (vs ADS8327IBPWR)
- Complete terminal and package replacement (vs ADS8327IPWRG4)
- Single-input unipolar measurement in a compact package (vs ADS8327IBPWR)
설계 노트
The analog source must settle the internal sampling capacitor during the acquisition interval. A high-impedance sensor amplifier can allow charge-sharing and conversion error even when the nominal conversion rate is suitable. Calculate the required settling time from the source resistance, ADC input capacitance, and acquisition window, then add a buffer when the resulting settling margin is inadequate.
Place supply and reference bypass capacitors close to their associated pins, and keep the analog input trace away from clocks, inductors, and high-current switching paths. Use a quiet ground return for the input and conditioning circuitry rather than routing analog return current through switching-node currents. The serial lines can be routed with normal digital-impedance control, provided no sensitive analog node is adjacent to a fast edge.
Power the ADS8327IPW only after confirming that the analog and digital supplies satisfy the 2.7 V to 5.5 V operating range. In portable equipment, calculate average consumption using the selected sample rate, conversion duty cycle, and idle interval rather than the peak 500-kSPS capability. Avoid sequencing the converter below its minimum operating voltage and ensure that shutdown transients do not create an input overshoot.
Digital serial edges can couple into the sampling network even when the signal is slow relative to the ADC conversion rate. Keep the analog input and reference routes compact, provide solid ground references, and place bypass capacitors at the device pins. If measuring a high-bandwidth source, evaluate the complete front-end bandwidth separately from the 500-kSPS conversion rate to avoid aliasing and amplitude roll-off.
규정 준수 정보
The manufacturer product page and product summaries do not provide enough explicit environmental-compliance detail to assign RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. ADS8327IPW is an industrial data-conversion IC rather than an automotive-qualified variant.