ADUM1300ARWZ - 3-Ch Digital Isolator 2500Vrms | Analog Devices
부품 번호: ADUM1300ARWZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.75 | $2.75 |
| 10 | $2.5 | $25.00 |
| 100 | $2.2 | $220.00 |
| 500 | $1.95 | $975.00 |
| 1,000 | $1.75 | $1,750.00 |
ADUM1300ARWZ 개요
Digital isolators are components that transmit digital signals across an isolation barrier, providing galvanic isolation to protect circuits and users from high voltages, ground loops, and noise. They replace optocouplers in many applications, offering higher speed, better reliability, and lower power consumption. The ADUM1300ARWZ is part of the iCoupler family, which uses monolithic transformer technology to achieve superior performance compared to traditional optocouplers.
Key features include three independent isolation channels, a wide supply voltage range of 3.0V to 5.5V, and a maximum data rate of 1Mbps. The device offers 25kV/µs CMTI, ensuring reliable operation in noisy industrial environments. It also features low power consumption, with typical quiescent current of 1.3mA per channel, and operates over a temperature range of -40°C to +105°C.
The ADUM1300ARWZ uses a magnetic coupling architecture, where data is transmitted across a thin isolation barrier using integrated transformers. This approach eliminates the need for LEDs and photodiodes, improving performance and reliability. The device includes a refresh mechanism to maintain output states even when the input is static, ensuring correct operation in all conditions.
Typical applications include industrial fieldbus communication, motor control, power inverters, and isolated SPI/UART interfaces. The high CMTI and 2500Vrms isolation make it suitable for harsh environments where noise and voltage transients are common.
When designing with this device, ensure proper PCB layout with adequate creepage and clearance distances for the isolation rating. Place decoupling capacitors close to the VDD pins and follow the recommended layout guidelines in the datasheet to achieve optimal performance.
드롭인 대체품: ADUM1300ARWZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADUM1300ARWZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature Range, Technology, Propagation Delay, Common-Mode Transient Immunity (CMTI).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ADUM1300BRWZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ADUM1300ARWZ-RL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADUM1301ARWZ
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.03 / 개
데이터시트 보기 →ISO7131
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
SI8610
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADUM1300ARWZ 사양
| Number of Channels | 3 |
| Isolation Voltage | 2500 Vrms |
| 데이터 속도 | 1 Mbps |
| CMTI | 25 kV/µs |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Quiescent Current (per channel) | 1.3 mA (typical) |
| 동작 온도 범위 | -40°C to +105°C |
| 패키지 | 16-SOIC (0.295", 7.50mm Width) |
| 실장 유형 | Surface Mount |
| Technology | Magnetic Coupling (iCoupler) |
| Type | General Purpose |
| RoHS 상태 | Compliant |
ADUM1300ARWZ 핀 구성
| 핀 1 | VDD1 — Supply voltage side 1 |
| 핀 2 | GND1 — Ground side 1 |
| 핀 3 | VIA — Input channel A |
| 핀 4 | VIB — Input channel B |
| 핀 5 | VIC — Input channel C |
| 핀 6 | GND1 — Ground side 1 |
| 핀 7 | NC — No connect |
| 핀 8 | NC — No connect |
| 핀 9 | NC — No connect |
| 핀 10 | NC — No connect |
| 핀 11 | GND2 — Ground side 2 |
| 핀 12 | VOA — Output channel A |
| 핀 13 | VOB — Output channel B |
| 핀 14 | VOC — Output channel C |
| 핀 15 | GND2 — Ground side 2 |
| 핀 16 | VDD2 — Supply voltage side 2 |
일반적인 애플리케이션
ADUM1300ARWZ 적합 용도: 6 애플리케이션s: Industrial Fieldbus Communication, Motor Control, Power Inverters, Isolated SPI/UART Interface, Medical Equipment, Data Acquisition Systems.
Industrial Fieldbus Communication
The ADUM1300ARWZ provides galvanic isolation for fieldbus interfaces like RS-485 and CAN, protecting controllers from ground loops and voltage transients. Its 2500Vrms isolation and 25kV/µs CMTI ensure reliable data transmission in noisy industrial environments. The 1Mbps data rate is adequate for most fieldbus protocols, and the 3.0V to 5.5V supply range allows direct interface with common logic levels. When used with a transceiver like the ADM2483, it enables robust isolated communication links.
추천
Motor Control
In motor control systems, the ADUM1300ARWZ isolates gate drive signals and feedback from the microcontroller. Its high CMTI of 25kV/µs prevents false triggering due to fast switching transients in the power stage. The 2500Vrms isolation protects low-voltage control circuitry from high-voltage bus voltages. The device's 1Mbps data rate is sufficient for PWM signals up to several hundred kHz. Proper PCB layout with adequate creepage is essential to maintain isolation integrity.
추천
Power Inverters
The ADUM1300ARWZ is used in power inverters to isolate control signals from high-voltage power stages. Its 2500Vrms isolation rating meets safety requirements for many inverter designs. The high CMTI ensures reliable operation in the presence of fast voltage transients from switching IGBTs or MOSFETs. The device's low power consumption helps maintain efficiency in the control circuitry. It is suitable for solar inverters, UPS systems, and variable frequency drives.
추천
Isolated SPI/UART Interface
The ADUM1300ARWZ provides isolation for SPI and UART communication between systems with different ground potentials. Its three channels can be configured to isolate clock, data, and control signals. The 1Mbps data rate supports standard SPI speeds up to 1MHz and UART baud rates up to 1Mbps. The device's low propagation delay ensures minimal timing skew in synchronous protocols. It is ideal for isolated sensor interfaces and data acquisition systems.
추천
Medical Equipment
In medical devices, the ADUM1300ARWZ provides patient isolation, protecting users from electric shock. Its 2500Vrms isolation rating meets safety standards for many medical applications. The device's low power consumption and small footprint make it suitable for portable medical devices. The high CMTI ensures reliable operation in environments with electromagnetic interference. It is used in patient monitors, infusion pumps, and diagnostic equipment.
추천
Data Acquisition Systems
The ADUM1300ARWZ isolates digital signals in data acquisition systems, preventing ground loops and noise from corrupting measurements. Its 2500Vrms isolation protects sensitive analog front-ends from digital noise. The 1Mbps data rate is sufficient for most ADC and DAC control signals. The device's low power consumption is beneficial for battery-powered systems. It is commonly used in industrial data loggers and test equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADUM1300ARWZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADUM1300BRWZ | ADUM1300ARWZ-RL | ADUM1301ARWZ | ISO7131 | SI8610 |
|---|---|---|---|---|---|---|
| Package | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) | 16-SOIC (0.295", 7.50mm Width) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Skyworks Solutions |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V | 2.5V to 5.5V |
| Operating Temperature Range | -40°C to +105°C | -40°C to +125°C | -40°C to +105°C | -40°C to +105°C | -40°C to +125°C | -40°C to +125°C |
| Channel Configuration | 3 forward | 3 forward | 3 forward | 2 forward, 1 reverse | 3 forward | 3 forward |
주요 차별점
- iCoupler magnetic isolation technology (vs Optocouplers)
- Extended temperature range option (vs ADUM1300ARWZ)
- Pin-compatible with ADUM1301 (vs ADUM1301ARWZ)
설계 노트
For optimal isolation performance, maintain at least 8mm creepage and clearance distances between the primary and secondary sides on the PCB. Place the ADUM1300ARWZ near the board edge to maximize isolation distance. Use a solid ground plane under the device on each side, but do not connect the two ground planes together except through the isolation barrier.
Decouple both VDD1 and VDD2 with 0.1µF ceramic capacitors placed as close as possible to the pins. Additionally, use a 10µF bulk capacitor on each supply if the power source is far away. The ADUM1300ARWZ consumes approximately 1.3mA per channel, so ensure the power supply can handle the total current without significant voltage drop.
Do not exceed the absolute maximum supply voltage of 7V on VDD1 or VDD2. Ensure that the input signals do not exceed the supply voltage by more than 0.5V. When driving the inputs, avoid floating inputs by connecting unused inputs to GND or VDD. The device has a refresh mechanism, but proper termination of unused pins prevents noise-induced errors.
규정 준수 정보
RoHS compliant per Analog Devices product page. AEC-Q100 not applicable for this non-automotive grade part.