Analog Devices의 ADV7180BCPZ - 10-Bit SDTV Video Decoder | Analog Devices ADV7180BCPZ - 전자 부품
Analog Devices

ADV7180BCPZ - 10-Bit SDTV Video Decoder | Analog Devices

부품 번호: ADV7180BCPZ ✗ 단종
1.8 V Vdss Ultralow Id NTSC, PAL, and SECAM Rds(on) 40-LFCSP-VQ, 6 mm × 6 mm Package
견적 요청
MOQ: 1 |
데이터시트 보기 (PDF) 대체품 보기

ADV7180BCPZ 개요

The Analog Devices ADV7180BCPZ is a 10-bit, 4× oversampling SDTV video decoder with three analog video input channels, automatic NTSC, PAL, and SECAM detection, and an 8-bit ITU-R BT.656-compatible digital output. It accepts a 1.0 V analog input range and operates from a 1.8 V core supply, with 1.8 V to 3.3 V I/O capability, in a 40-LFCSP-VQ package measuring 6 mm by 6 mm.

A video decoder converts composite, Y/C, or component analog video into digital pixel and timing data. The ADV7180BCPZ belongs to the video decoder hierarchy within mixed-signal and digital signal processing semiconductors. Its internal 10-bit ADC samples CVBS at 4× oversampling, Y/C at 2× oversampling, and YPrPb at 2× oversampling per channel. On-chip antialiasing filtering supports the three analog input channels, while automatic color-standard detection simplifies multistandard system configuration.

The decoder produces 4:2:2 component video compatible with the 8-bit ITU-R BT.656 interface. Its digital output can connect to MPEG encoders, codecs, mobile video processors, and other compatible digital video devices. A two-wire serial microprocessor interface provides I2C-compatible control, allowing software or hardware configuration of the decoder without a large parallel control bus.

ADV7180BCPZ is fabricated using a 1.8 V CMOS process and is designed for low power dissipation in space-constrained systems. The analog signal range is 1.0 V, while separate digital I/O supply capability permits interfacing with systems operating at 1.8 V or 3.3 V. The device also includes a full-featured VBI data slicer with teletext support, a power-down mode, and an ultralow sleep-mode current option.

Typical applications include analog television capture, industrial video inspection, broadcast monitoring, set-top-box video input, security surveillance, and embedded multimedia systems. In each case, the three-channel analog front end and automatic NTSC, PAL, and SECAM detection simplify the signal chain while the BT.656 output provides a standardized digital interface.

PCB implementation should preserve the analog and digital return paths specified by the manufacturer and place decoupling capacitors close to their respective supply pins. Because the LFCSP-VQ package is compact and has many fine-pitch connections, follow the land pattern and exposed-pad assembly guidance in the ADV7180 datasheet. The manufacturer identifies the ADV7180 family as not recommended for new designs, so long-lived or new production programs should confirm lifecycle and sourcing implications before committing the device to a new board.

This page summarizes the decoder architecture, operating conditions, application fit, and replacement constraints. It also organizes pin-compatible alternatives, practical layout considerations, and key selection trade-offs that are not consolidated in a single manufacturer resource.

드롭인 대체품: ADV7180BCPZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADV7180BCPZ (동일 폼 팩터 및 풋프린트) — 차이점: Control Interface, Package, Product Type.

Analog Devices
Control Interface: I2C-compatible 2-wire serial interface
Package: 40-lead LFCSP-VQ
Product Type: Integrated digital video encoder
비교 대상: ADV7180BCPZ →

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

ADV7180BCPZ 사양

Product Type 10-bit, 4× oversampling SDTV video decoder
Analog Input Signal Range 1.0 V
ADC Resolution 10 bit
Maximum Sampling Rate 57.27 MSPS
Analog Video Input Channels 3 channels
Supported Color Standards NTSC, PAL, and SECAM
Digital Output Format 4:2:2 component video, 8-bit ITU-R BT.656 compatible
CVBS Oversampling 4×
Y/C Oversampling 2×
YPrPb Oversampling 2× per channel
Core Supply Voltage 1.8 V
Analog Supply Voltage 1.8 V
PLL Supply Voltage 1.8 V
Digital Supply Voltage 1.8 V
I/O Supply Voltage 1.8 V to 3.3 V
Control Interface 2-wire serial, I2C compatible
On-Chip Antialiasing Filter Present on 3 analog input channels
VBI Data Slicer Full-featured with teletext support
Commercial Temperature Grade -10°C to +70°C
Industrial and Automotive Qualified Temperature Grade -40°C to +85°C
Power-Down Mode Supported
Sleep Mode Current Ultralow
Process Technology 1.8 V CMOS
패키지 40-LFCSP-VQ, 6 mm × 6 mm
실장 유형 Surface mount

ADV7180BCPZ 40-lfcsp-vq, 6 mm × 6 mm 핀 구성 가이드

ADV7180BCPZ(40-lfcsp-vq, 6 mm × 6 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADV7180BCPZ의 40-lfcsp-vq, 6 mm × 6 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADV7180BCPZ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADV7180BCPZ 적합 용도: 6 애플리케이션s: Analog Television Video Capture, Industrial Video Inspection, Broadcast Monitoring Equipment, Set-Top Box Video Input, Security Surveillance Systems, Embedded Multimedia and Mobile Video Systems.

📺

Analog Television Video Capture

The ADV7180BCPZ fits analog television capture systems that require automatic handling of worldwide NTSC, PAL, and SECAM inputs. Its 10-bit ADC, 4× CVBS oversampling, and three analog channels provide flexible front-end integration, while the 8-bit ITU-R BT.656 output connects directly to compatible encoders or codecs. The 57.27 MSPS maximum sampling rate and BT.656 output reduce the need for separate conversion stages, although the NRND lifecycle status requires confirmation for long-lived programs.

추천

ADV7180WBCPZ (Automotive-orderable member of the same decoder family) ADV7180KCP32Z (Same-family ordering variant with a different package)
🏭

Industrial Video Inspection

The ADV7180BCPZ is suitable for industrial inspection equipment that receives composite or component analog video from cameras or legacy machinery. Three input channels allow multiple sources to be selected, and automatic NTSC, PAL, and SECAM detection avoids requiring operators to identify each signal standard. The 1.0 V analog input range and on-chip antialiasing filters support signal conditioning, while the digital BT.656 output can feed a processor for image analysis.

추천

ADV7180WBCPZ (Same-family variant for industrial and automotive temperature requirements)
🌐

Broadcast Monitoring Equipment

The ADV7180BCPZ can serve as the decoding front end in broadcast monitoring equipment handling composite baseband television signals. Automatic color-standard detection supports equipment deployed across regions using NTSC, PAL, or SECAM, and the standardized 4:2:2 ITU-R BT.656 output simplifies connection to downstream encoders and codecs. Its full-featured VBI data slicer with teletext support adds value for installations that need ancillary vertical-interval information.

추천

ADV7180WBCPZ (Same-family decoder variant with automotive temperature capability)
📱

Set-Top Box Video Input

The ADV7180BCPZ can serve legacy analog-video inputs in a set-top box or media gateway. Its three-channel analog front end supports flexible source selection, while automatic standard detection simplifies compatibility with regional broadcast signals. The 1.8 V CMOS implementation and 1.8 V to 3.3 V I/O range allow the decoder to share a power architecture with modern video logic. The BT.656 output provides a direct, standardized path to an MPEG encoder or codec.

추천

ADV7180WBCPZ (Same-family ordering option for broader temperature operation) ADV7180KCP32Z (Same decoder family for platform evaluation)
🎥

Security Surveillance Systems

The ADV7180BCPZ fits surveillance installations that retain analog camera links but require standardized digital output for recording or network encoding. Three analog input channels can support multi-camera switching, and the automatic NTSC, PAL, and SECAM detection reduces configuration complexity across mixed camera populations. The 4:2:2 BT.656 interface provides a direct path to compatible compression hardware, while the low-power 1.8 V CMOS process suits compact multi-channel installations.

추천

ADV7180WBCPZ (Same-family decoder for broader temperature environments)
🖥️

Embedded Multimedia and Mobile Video Systems

The ADV7180BCPZ is appropriate for embedded multimedia equipment that accepts analog television video and forwards it to a mobile video processor or codec. Its space-constrained 40-LFCSP-VQ package, three integrated analog channels, and single 1.8 V core architecture support compact designs. The decoder’s BT.656 output avoids a proprietary digital link, while 1.8 V to 3.3 V I/O support allows direct interfacing with processors using different logic levels.

추천

ADV7180WBCPZ (Same-family package and function variant) ADV7180KCP32Z (Same decoder family with different mechanical outline)

추천 제품 요약

ADV7180WBCPZ Automotive-orderable member of the same decoder family 사용처: Analog Television Video Capture, Industrial Video Inspection, Broadcast Monitoring Equipment, Set-Top Box Video Input, Security Surveillance Systems, Embedded Multimedia and Mobile Video Systems ADV7180KCP32Z Same-family ordering variant with a different package 사용처: Analog Television Video Capture, Set-Top Box Video Input, Embedded Multimedia and Mobile Video Systems
What is the ADV7180BCPZ and what does it do?
The ADV7180BCPZ is a 10-bit, 4× oversampling SDTV video decoder from Analog Devices. It converts NTSC, PAL, and SECAM analog baseband video into 4:2:2 component data through an 8-bit ITU-R BT.656-compatible interface. According to the ADV7180 Rev. K datasheet, the device supports three analog video input channels, automatic color-standard detection, and a maximum sampling rate of 57.27 MSPS.
What are the key specifications of ADV7180BCPZ that engineers should know?
The ADV7180BCPZ combines a 10-bit ADC, three analog video inputs, automatic NTSC/PAL/SECAM detection, and an 8-bit ITU-R BT.656 output in a 40-LFCSP-VQ package. According to the ADV7180 Rev. K datasheet, it supports 57.27 MSPS operation, 1.0 V analog input range, 1.8 V core and analog supplies, and a 1.8 V to 3.3 V I/O supply range.
Where can I download the ADV7180BCPZ datasheet PDF?
The official ADV7180BCPZ datasheet PDF is available from Analog Devices at the manufacturer URL listed on this page. The document is identified as ADV7180 Rev. K and includes the selection guide, electrical characteristics, register information, pin descriptions, and application guidance. Use the manufacturer PDF for final power sequencing, land-pattern, clocking, and signal-integrity decisions.
Where can I find the ADV7180BCPZ pinout?
The ADV7180BCPZ pinout is documented in the pin-description and package-drawing sections of the official ADV7180 Rev. K datasheet. The device uses a 40-LFCSP-VQ package with analog, digital, PLL, control, clock, and power connections distributed across the package. Use that pin-description table when assigning PCB tracks and confirm exposed-pad assembly requirements before layout release.
Which video standards are supported by ADV7180BCPZ?
The ADV7180BCPZ supports worldwide NTSC, PAL, and SECAM color demodulation. According to the ADV7180 Rev. K datasheet, the decoder automatically detects compatible standard analog baseband television signals and converts them into 4:2:2 component video. The output is compatible with the 8-bit ITU-R BT.656 interface, allowing connection to compatible encoders, codecs, and video processors.
What supply voltages does ADV7180BCPZ require?
The ADV7180BCPZ supports a 1.8 V core supply, 1.8 V analog supply, 1.8 V PLL supply, and 1.8 V digital supply. Its I/O supply can operate from 1.8 V to 3.3 V. According to the ADV7180 Rev. K datasheet, the device can therefore interface with either 1.8 V or 3.3 V digital peripherals while maintaining separate analog and digital supply domains.
How does ADV7180BCPZ connect to an MPEG encoder or codec?
The ADV7180BCPZ connects to a compatible MPEG encoder or codec through its 8-bit ITU-R BT.656 digital video output. The decoder receives analog baseband television signals, performs 10-bit conversion and color demodulation, and presents 4:2:2 component data with embedded synchronization. According to the ADV7180 Rev. K datasheet, this interface supports connection to a broad range of MPEG encoders, codecs, and mobile video processors.
What is the ADV7180BCPZ control interface?
The ADV7180BCPZ uses a 2-wire serial microprocessor interface that is compatible with I2C. This control path is used to configure the decoder and access its registers. According to the ADV7180 Rev. K datasheet, the interface reduces control-pin count compared with a parallel register interface while supporting the operating modes and identification functions required for standard analog-video capture systems.
Can ADV7180BCPZ be used for Y/C and YPrPb video inputs?
Yes. The ADV7180BCPZ supports Y/C and YPrPb modes as well as composite video. According to the ADV7180 Rev. K datasheet, the internal 10-bit ADC uses 4× oversampling for CVBS, 2× oversampling for Y/C, and 2× oversampling for YPrPb per channel. The three analog channels also include on-chip antialiasing filters for conditioning these input signals.
Is ADV7180BCPZ suitable for new designs?
The ADV7180BCPZ is generally unsuitable for routine new-design selection without a lifecycle review. Analog Devices lists the ADV7180 family as not recommended for new designs, which corresponds to an NRND lifecycle status rather than active production status. According to the manufacturer product page, existing programs may still require the device, so new projects should confirm availability and roadmap implications before layout commitment.
What can replace ADV7180BCPZ as a direct drop-in part?
No verified pin-to-pin drop-in replacement for ADV7180BCPZ is identified by the available cross-reference information. Some ADV7180 family members use different package dimensions or ordering codes, while listed devices from other manufacturers may have different packages, interfaces, or feature sets. Treat any replacement as a redesign until its pin definitions, supply requirements, register behavior, and land pattern have been compared directly.
Is ADV7180BCPZ the same as ADV7280WBCPZ?
No. The ADV7280WBCPZ belongs to a different Analog Devices decoder family and should not be treated as a direct ADV7180BCPZ substitute. The available comparison identifies meaningful feature and specification differences, while the ADV7180 Rev. K datasheet lists ADV7180 variants separately from the ADV7280 family. Confirm the required decoder channels, standards, package, clocking, and digital interface before considering a platform change.
When should I choose ADV7180BCPZ over a redesigned video-input solution?
Choose the ADV7180BCPZ when maintaining an existing analog-video platform is more important than starting a new decoder architecture. Its 10-bit conversion, three analog channels, automatic NTSC/PAL/SECAM detection, and BT.656 output can preserve an established capture pipeline. However, because the family is marked not recommended for new designs, long-lived new products should weigh roadmap continuity against the cost of redesigning around a current decoder.
Is ADV7180BCPZ suitable for industrial or automotive video capture?
The ADV7180BCPZ can operate across the industrial or automotive qualified temperature range of -40°C to +85°C, but temperature range alone does not establish full automotive qualification. According to the ADV7180 Rev. K datasheet, automotive-qualified ordering variants exist in the ADV7180 family. Select the exact qualified part number and verify its complete device specification before using it in an automotive design.
Where can I request a quote and current lead time for ADV7180BCPZ?
Use the Request a Quote form on this page to request current ADV7180BCPZ availability, lead time, minimum order quantity, and project pricing from XAIPART. The part is listed by Analog Devices as not recommended for new designs, so supply status may change with lifecycle conditions. State the exact suffix and required package quantity in the request because related ADV7180 ordering codes use different packages.
What design considerations matter for the ADV7180BCPZ power layout?
Treat the analog, PLL, digital, and I/O supplies as distinct domains and place the required decoupling capacitors close to their associated pins. According to the ADV7180 Rev. K datasheet, the device accepts 1.8 V analog, PLL, and digital supplies plus a 1.8 V to 3.3 V I/O supply. Keep analog traces away from switching nodes and follow the manufacturer’s pin, layout, and exposed-pad instructions for the 40-LFCSP-VQ package.

엔지니어링 참조 데이터: ADV7180BCPZ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADV7180BCPZ when maintaining an established analog-video design is essential, especially for three-channel NTSC, PAL, or SECAM capture with an 8-bit BT.656 output. Its integrated 10-bit ADC, automatic standard detection, 1.8 V core operation, and flexible I/O supply simplify adaptation to compatible encoders and codecs. Do not select it for routine new development without reviewing the manufacturer’s not-recommended-for-new-designs status. ADV7180 family variants may change temperature grade, automotive qualification, package, or ordering code, so none should replace the exact suffix without mechanical and electrical review. The ADV7280WBCPZ is a different decoder family and requires a platform evaluation. TVP5150, SAA7113, and MAX9526 may satisfy broad video-decoder requirements, but the available cross-reference information does not establish pin-to-pin compatibility or a same-package footprint. For a new product, compare current-generation decoders using channel count, supported standards, output interface, clocking, power, software support, and lifecycle instead of relying on functional similarity.

대체품과의 비교

파라미터 이 제품
Brand Analog Devices
Package 40-LFCSP-VQ, 6 mm × 6 mm
Decoder Resolution 10 bit
Maximum Sampling Rate 57.27 MSPS
Analog Input Channels 3 channels
Supported Standards NTSC, PAL, and SECAM
Digital Output 4:2:2, 8-bit ITU-R BT.656 compatible
Core Supply 1.8 V
I/O Supply Range 1.8 V to 3.3 V
Lifecycle Status Not recommended for new designs

주요 차별점

  • Integrated multistandard analog-video conversion (vs ADV7280WBCPZ)
  • Flexible digital-interface voltage range (vs ADV7180KCP32Z)
  • Three-channel analog front end with antialiasing filtering (vs TVP5150)
  • Standardized 8-bit BT.656 output (vs SAA7113)

설계 노트

Follow the manufacturer land pattern and exposed-pad assembly instructions for the 40-LFCSP-VQ package. Place the required input, output, and reference decoupling capacitors close to the associated power pins, with separate analog and digital return-current paths. Avoid routing switching-node or high-current return paths beneath the analog input area, because coupling into the video inputs can degrade picture quality even when the decoder itself is operating correctly.

Maintain the specified 1.8 V analog, PLL, and digital supplies and select the I/O supply according to the downstream BT.656 interface voltage. Use the power-up sequence and decoupling arrangement in the ADV7180 Rev. K datasheet. A single 1.8 V supply arrangement is possible, but the I/O domain must still be configured and filtered correctly for the voltage levels used by the connected processor, encoder, or codec.

Keep analog video traces short, use a continuous ground reference, and separate analog inputs from digital clocks and high-speed switching nodes. The 10-bit internal ADC does not remove the need for clean analog routing because input coupling, impedance discontinuities, and ground contamination can affect decoded images. Confirm termination and filtering values against the application schematics in the manufacturer datasheet rather than substituting generic network values.

Do not treat the ADV7180BCPZ, ADV7180WBCPZ, ADV7180KCP32Z, or ADV7180BCPZ-REEL as automatically interchangeable. Automotive qualification, package dimensions, exposed-pad construction, and ordering suffix can differ. Validate the exact mechanical drawing, pin assignment, temperature grade, and lifecycle status before substitution; a reel designation changes order handling but does not establish electrical or drop-in equivalence by itself.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The ADV7180 Rev. K datasheet identifies automotive-qualified family variants and operating-temperature grades, but the exact compliance declarations for ADV7180BCPZ are not stated in the available manufacturer snippets.

데이터 검증일: 2026-11-05 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADV7180BCPZ datasheet ADV7180BCPZ specifications ADV7180BCPZ pinout ADV7180BCPZ datasheet pdf ADV7180BCPZ application circuit ADV7180BCPZ equivalent ADV7180BCPZ replacement ADV7180BCPZ cross reference ADV7180BCPZ vs ADV7280WBCPZ ADV7180BCPZ footprint ADV7180BCPZ price ADV7180BCPZ stock Analog Devices ADV7180BCPZ 40-LFCSP-VQ video decoder ADV7180BCPZ 57.27 MSPS

관련 부품 & 용어

Analog Devices ADV7180BCPZ ADV7180 ADV7180WBCPZ ADV7180KCP32Z ADV7280WBCPZ TVP5150 SAA7113 MAX9526 video decoder SDTV video decoder mixed-signal integrated circuit digital signal processor semiconductor 10-bit ADC NTSC PAL SECAM ITU-R BT.656 4:2:2 component video I2C-compatible interface 40-LFCSP-VQ QFN package family surface-mount package analog video capture
빠른 견적 RFQ
영업팀이 24시간 이내에 답변드립니다
부품 번호MfrPkg수량목표 가격
×
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

장바구니 0개 항목
장바구니가 비어 있습니다
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기