ADV7283WBCPZ-RL - 10-Bit Video Decoder | Analog Devices
부품 번호: ADV7283WBCPZ-RL ✓ 활성ADV7283WBCPZ-RL 개요
A video decoder is an interface IC that translates legacy analog baseband video into a digital representation suitable for display, capture, conversion, or broadcast equipment. Within the signal-chain hierarchy, the ADV7283 belongs to the video codec and data-converter category, where analog-to-digital decoding precedes frame processing, scaling, encoding, or transmission. Its multiformat detection reduces the need for separate analog front ends for different television standards.
The decoder provides 10-bit digital video output and supports composite, S-Video, and component inputs. Differential analog inputs are intended for properly balanced source networks, while four-times oversampling supports robust reconstruction and filtering of the decoded video signal. An integrated deinterlacer provides the required conversion between interlaced and progressive scan representations. Control through I2C allows an embedded system to select operating parameters and read status information without dedicated parallel control signals.
The ADV7283 outputs its digital stream on the P0 through P7 data pins together with a line-locked clock, following the timing relationship specified for ITU-R BT.656. Its analog supply and digital interfaces support integration into multiformat video processing systems. The 5 mm by 5 mm LFCSP-32 construction provides a compact surface-mount option, although its exposed thermal pad and high-speed signals require careful PCB implementation.
Typical uses include legacy video capture in industrial monitoring equipment, broadcast test systems, consumer television and set-top designs, video-conversion products, and laboratory instrumentation. The decoder is particularly appropriate when one board must accept multiple analog video standards while presenting a standardized digital output to an FPGA, ASIC, or embedded processor. The I2C programming interface also simplifies integration with system control firmware.
Careful analog layout is essential because video signals must retain adequate signal integrity from the connector through the differential input network. The digital output clock and data traces should be routed with controlled impedance and short return paths, while the exposed pad requires a complete thermal-via and ground-plane arrangement. Verify supply sequencing, I2C addressing, synchronization timing, and deinterlacing behavior across every supported input format before production release.
This page consolidates the decoder's format support, interface characteristics, package information, replacement considerations, and practical integration guidance into an engineering-oriented selection reference. It also identifies where package pinning, electrical limits, and complete compliance details must be checked against the manufacturer datasheet before layout or qualification.
드롭인 대체품: ADV7283WBCPZ-RL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADV7283WBCPZ-RL (동일 폼 팩터 및 풋프린트) — 차이점: Control Interface, Package, Digital Interface Standard.
ADV7283BCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADV7283WBCPZ-RL 사양
| Device Type | Multiformat SDTV video decoder |
| Supported Analog Standards | NTSC, PAL, and SECAM |
| Supported Analog Inputs | Composite, S-Video, and component video |
| Digital Output Resolution | 10 bit |
| Digital Output Format | YCrCb 4:2:2 |
| Digital Interface Standard | ITU-R BT.656, 8 bit |
| Oversampling | 4 times |
| Analog Input Type | Differential inputs |
| Control Interface | I2C |
| Integrated Deinterlacer | Yes |
| Digital Video Data Pins | 8 pins, P0 to P7 |
| Synchronization Output | Line-locked clock |
| 패키지 | 32-LFCSP, 5 mm x 5 mm |
| Package Type | LFCSP with exposed pad |
| 실장 유형 | Surface mount |
| Shipping Package | Tape and reel |
| 동작 온도 범위 | -40 °C to +105 °C |
| Supply Voltage Range | 1.62 V to 3.63 V |
| Additional Supply Voltage Range | 1.71 V to 1.89 V |
| Analog-to-Digital Converter Count | 1 |
ADV7283WBCPZ-RL tape and reel 핀 구성 가이드
ADV7283WBCPZ-RL(tape and reel 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADV7283WBCPZ-RL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADV7283WBCPZ-RL 적합 용도: 6 애플리케이션s: Industrial Video Monitoring, Broadcast Video Conversion, Legacy Set-Top Box Integration, Video Capture and Conversion, Analog Video Test Equipment, Consumer AV Retrofit Products.
Industrial Video Monitoring
The ADV7283WBCPZ-RL is well suited to industrial monitoring systems that must accept legacy composite, S-Video, or component camera signals. It automatically detects NTSC, PAL, and SECAM, reducing the need for separate analog decoding stages, and converts the selected input into a YCrCb 4:2:2 stream carrying 10-bit digital data. The differential inputs help preserve signal integrity over industrial cable runs when implemented with controlled impedance and proper grounding. The resulting ITU-R BT.656 stream can feed an FPGA or embedded video processor for recording, analytics, or display conversion. Integration planning should include connector protection, input conditioning, I2C configuration, and validation of synchronization behavior for every camera format used in the installation.
추천
Broadcast Video Conversion
The ADV7283WBCPZ-RL provides a practical analog-to-digital front end for broadcast and studio equipment that still handles legacy baseband video. Its automatic NTSC, PAL, and SECAM detection supports a shared decoding path across multiple regions, while composite, S-Video, and component compatibility simplifies input selection. The decoder produces 10-bit YCrCb 4:2:2 data through an 8-bit ITU-R BT.656-compatible output, allowing downstream circuitry to operate from a standardized digital representation. For professional conversion equipment, designers should validate video timing, chroma performance, and synchronization against each required standard. Differential routing, isolated supply planning, and a controlled clocking strategy are equally important for repeatable broadcast signal acquisition.
추천
Legacy Set-Top Box Integration
The ADV7283WBCPZ-RL can serve as the analog-video input stage of a legacy set-top or television design that must coexist with digital broadcast reception. Automatic format detection removes much of the manual configuration previously required when NTSC, PAL, or SECAM sources could arrive at the same connector. Its 10-bit decoding, four-times oversampling, and integrated deinterlacer support conversion of composite, S-Video, or component signals into a digital stream suitable for a display pipeline. The compact 32-LFCSP package saves board area, but the exposed pad must be connected to the appropriate thermal and ground structure. Firmware should include control sequences for I2C setup, status checking, and recovery from unsupported or unstable input conditions.
추천
Video Capture and Conversion
The ADV7283WBCPZ-RL fits capture cards, portable converters, and laboratory instruments that accept several analog video formats and need a digital output for image processing. Its multiformat detection supports NTSC, PAL, and SECAM, while the 10-bit YCrCb 4:2:2 output offers a consistent format for the downstream processor. The four-times-oversampling architecture and differential analog inputs are valuable in compact systems where cable pickup and ground offsets can affect image stability. An FPGA or application processor can capture the ITU-R BT.656 data and line-locked clock, synchronize frames, and perform scaling or storage. System validation should cover minimum and maximum input amplitudes, cable lengths, unsupported-signal detection, and I2C behavior across temperature and power-supply tolerances.
추천
Analog Video Test Equipment
The ADV7283WBCPZ-RL is appropriate for compact test and measurement products that need to decode composite, S-Video, or component signals from equipment under test. Automatic format recognition lets the instrument identify whether the source follows NTSC, PAL, or SECAM before configuring the acquisition path. The resulting 10-bit YCrCb 4:2:2 stream and line-locked clock can be evaluated by a processor for timing, level, and functional checks. Differential inputs help isolate the decoder from common-mode disturbances encountered in test environments, although cable and source termination still require careful treatment. Design the control software to read decoder status through I2C, report unsupported or unstable sources, and retain timing traces that help distinguish source faults from board-level signal-integrity faults.
추천
Consumer AV Retrofit Products
The ADV7283WBCPZ-RL enables compact consumer AV products to preserve older composite, S-Video, or component sources while presenting modern digital video to an FPGA, display controller, or network processor. Automatic NTSC, PAL, and SECAM detection is valuable in retrofit equipment intended for international reuse, where input standards may vary by installation location. The 5 mm by 5 mm 32-LFCSP package limits board footprint, while the integrated deinterlacer assists the conversion of interlaced legacy video for progressive displays. Thermal and layout quality remain essential because the exposed pad provides the primary heat-spreading path. Production testing should verify each supported analog format, sync polarity, chroma phase, and I2C initialization sequence before shipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADV7283WBCPZ-RL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADV7283BCPZ |
|---|---|---|
| Package | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) |
| Brand | Analog Devices | Analog Devices |
| Decoder Resolution | 10 bit | 10 bit |
| Supported Standards | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM |
| Analog Input Types | Composite, S-Video, and component video | Composite, S-Video, and component video |
| Oversampling | 4 times | 4 times |
| Digital Output | YCrCb 4:2:2, 8-bit ITU-R BT.656 | YCrCb 4:2:2, 8-bit ITU-R BT.656 |
| Control Interface | I2C | I2C |
| Integrated Deinterlacer | Yes | Yes |
| Shipping Configuration | Tape and reel | Non-RL orderable configuration |
주요 차별점
- One decoder supports three international analog television families (vs ADV7283BCPZ)
- Multiformat input coverage in a compact 5 mm by 5 mm package (vs ADV7283BCPZ)
- Digital interface and control configuration remain aligned (vs ADV7283BCPZ)
설계 노트
Route the differential analog inputs as a controlled-impedance pair with symmetrical geometry and a continuous ground reference. Keep the connector, input protection components, and decoder pins close together so that non-video nets do not interrupt the return path. Place the analog input network before the digital section of the board and maintain the separation recommended in the Analog Devices manufacturer datasheet.
Treat the P0-to-P7 digital outputs and line-locked clock as a synchronous source-synchronous interface. Route the data group and clock with matched trace lengths, avoid split planes beneath the clock path, and minimize stub effects from test points. Confirm the receiver's timing requirements in the manufacturer datasheet and account for connector and via parasitics when the decoder is located far from the FPGA or processor.
Connect the 32-LFCSP exposed pad to the recommended ground and thermal structure, using short thermal-via connections rather than relying on a single via. Check the maximum power dissipation and package thermal limits in the Analog Devices manufacturer datasheet against the actual analog, digital, and I/O loading. Provide copper area on the opposite PCB side when space allows to improve heat spreading into the enclosure.
Do not assign the 32-LFCSP footprint solely from its body dimensions; the exposed pad is a separate thermal and electrical land. Confirm the pad connection, pin numbering, and land pattern against the official package drawing. Also verify I2C address strapping, input termination, and supported analog amplitude before layout release, since errors in these areas can appear as unstable format detection or missing synchronization.
규정 준수 정보
Compliance status is not stated in the cited product and datasheet snippets. Confirm the current material and environmental declarations with Analog Devices before using the device in a regulated production design.