AK4397EQ - 32-Bit 192kHz High-Performance DAC | AKM
부품 번호: AK4397EQ ✓ 활성AK4397EQ 개요
A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage that drives an audio output stage. The DAC belongs to the broader signal-conversion hierarchy: converter IC, audio data converter, DAC, and ultimately semiconductor. AKM's multibit modulator architecture supports high dynamic range while preserving linearity, improving total harmonic distortion plus noise performance in demanding playback systems.
The AK4397EQ accepts 32-bit digital audio data and supports sampling rates up to 192 kHz. Its integrated digital filtering provides a defined conversion path before the analog output stage. Full differential switched-capacitor-filter outputs remove the need for AC-coupling capacitors between the converter and a subsequent balanced audio amplifier, simplifying high-end audio board design and reducing low-frequency phase effects.
The multibit modulator is a key technical feature. Its architecture is designed to balance dynamic range, linearity, and THD+N performance rather than relying only on resolution alone. Differential SCF outputs support low-noise balanced downstream amplification and reduce sensitivity to ground and supply disturbances when the analog section is laid out carefully.
Typical applications include premium CD and DVD-Audio players, network audio players, digital audio workstations, home-theater receivers, and high-resolution headphone amplifiers. The device is also suitable for professional monitoring equipment where the combination of 192 kHz operation, digital filtering, and differential analog outputs supports faithful signal reproduction.
The analog and digital sections must be routed as separate return paths on the PCB, with the analog ground and digital ground joined according to the manufacturer's reference layout. Differential output routing should be symmetric, and supply bypass capacitors should sit close to their corresponding pins. Confirm the complete pin mapping and external component values in the AKM AK4397 datasheet before layout release.
This page organizes the AK4397EQ's documented conversion capabilities, application guidance, interface considerations, and engineering trade-offs in a form that supports component selection, schematic review, and PCB planning.
드롭인 대체품: AK4397EQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청AK4397EQ 최대 정격 & 전기적 특성
| Converter Type | Stereo digital-to-analog converter |
| Data Resolution | 32 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Filter Resolution | 32 bit |
| Modulator Architecture | Multibit architecture |
| Analog Output Architecture | Full differential SCF output |
| AC Coupling Capacitors | Not required for differential SCF outputs |
| Target Signal Class | Premium digital audio |
| Supported Use Case | DVD-Audio and 192 kHz digital audio |
| Analog Output Type | Differential current output with SCF stage |
| Packaging | Tape & Reel (TR) |
| RoHS 상태 | unknown |
| REACH Status | unknown |
AK4397EQ dvd-audio and 192 khz digital audio 핀 구성 가이드
AK4397EQ(dvd-audio and 192 khz digital audio 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AK4397EQ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK4397EQ 적합 용도: 6 애플리케이션s: Premium DVD-Audio Player, High-Resolution Network Audio Player, Balanced Headphone Output Stage, Digital Audio Workstation, Home-Theater Preamp Receiver, Professional Studio Monitor Controller.
Premium DVD-Audio Player
The AK4397EQ fits a high-resolution DVD-Audio playback chain because it supports 32-bit data at sampling rates up to 192 kHz, including the DVD-Audio sampling mode identified in the AKM datasheet. Its integrated 32-bit digital filter provides a defined conversion path, while the multibit modulator is designed to preserve linearity and THD+N performance. Full differential SCF outputs simplify the connection to a balanced line-output stage without AC-coupling capacitors. In a player, place the converter close to the output amplifier so that differential traces remain short and symmetric.
추천
High-Resolution Network Audio Player
The AK4397EQ is well suited to a network player that accepts high-resolution digital streams because it supports 192 kHz sampling and 32-bit conversion. A digital interface such as AK5522VN can supply compatible I2S or S/PDIF-format data to the converter, subject to format and clock-configuration checks. The AK4397's differential SCF outputs reduce the need for output coupling capacitors and feed a balanced amplifier cleanly. Keep the clock, data, and analog-output paths away from switching regulators and preserve a quiet analog return path.
추천
Balanced Headphone Output Stage
The AK4397EQ can drive a balanced headphone amplifier through its full differential SCF outputs, eliminating AC-coupling capacitors between the converter and the amplifier input. This arrangement supports a compact analog section while preserving channel symmetry in the DAC-to-amplifier path. The converter's 192 kHz capability also preserves high-resolution source information before the headphone stage performs gain and impedance conversion. Use matched routing, short traces, and supply decoupling close to the converter pins.
추천
Digital Audio Workstation
The AK4397EQ supports monitoring and mastering-path prototypes that need a premium 32-bit DAC with 192 kHz operation. Its multibit modulator architecture is intended to maintain wide dynamic range and linearity, while the integrated 32-bit digital filter provides a controlled conversion stage. Differential outputs make the converter practical for balanced monitoring preamplifiers and professional output interfaces. Evaluate noise and distortion under the actual output level, load, and clocking configuration because those conditions determine the usable performance margin.
추천
Home-Theater Preamp Receiver
The AK4397EQ can serve as the premium stereo conversion stage of a home-theater preamp or high-end surround processor. Its 192 kHz-capable 32-bit conversion supports modern lossless sources, and the differential SCF outputs provide a direct path into a balanced line amplifier. Compared with a converter that requires AC coupling, the AK4397 topology can reduce output-stage component count and preserve a balanced signal path. Separate analog and digital return routing remains essential in a dense multi-channel receiver board.
추천
Professional Studio Monitor Controller
The AK4397EQ fits a professional monitor controller where the digital-to-analog stage must preserve high-resolution material before a balanced power amplifier. The 32-bit, 192 kHz conversion capability handles the common high-resolution studio rates, while the differential SCF output stage avoids output coupling capacitors and helps maintain channel balance. Use the datasheet's reference application and layout guidance to control ground current and supply noise. Verify the monitor amplifier's gain, input impedance, and bandwidth against the converter's output characteristics.
추천
추천 제품 요약
엔지니어링 참조 데이터: AK4397EQ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Asahi Kasei Microdevices/AKM |
| Converter Function | Premium stereo DAC |
| Data Resolution | 32 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Filter | Integrated 32-bit digital filter |
| Modulator Architecture | Multibit architecture |
| Analog Output | Full differential SCF outputs |
| Output Coupling | AC-coupling capacitors not required |
| Target Application | DVD-Audio and high-resolution digital audio |
주요 차별점
- Direct differential output without coupling capacitors (vs AK4495EQ)
- Purpose-built 192 kHz premium conversion path (vs AK4490EN)
- Multibit modulator with integrated 32-bit filtering (vs AK5522VN)
설계 노트
Separate the analog and digital return paths and connect them using the topology shown in the manufacturer's reference layout. Route the differential SCF outputs as a tight, symmetrical pair, keep the digital clock and data interfaces away from those outputs, and avoid placing high-current return paths beneath the converter. Symmetry limits channel-to-channel delay and impedance differences, while controlled return current helps the full differential output stage achieve its intended linearity.
Place the specified supply-bypass capacitors at the closest possible pins to the AK4397EQ, with short and wide return paths to the associated ground planes. Analog and digital supplies may require different filtering strategies, so follow the application circuit rather than applying a single generic network to both domains. Check startup sequencing and the operating limits for each supply in the datasheet before powering the assembled board.
Do not assume that any similarly positioned premium DAC is a drop-in replacement for the AK4397EQ. The clock interface, digital filter behavior, analog output topology, supply pins, and package routing must all be checked against the original design. A different converter may require component changes, a revised output stage, and a different PCB layout even when it supports the same sample rate and nominal bit depth.
규정 준수 정보
Compliance declarations were not identified in the retrieved manufacturer and distributor pages. The AK4397EQ is an audio converter IC and is not presented as an automotive-qualified AEC-Q100 product.