AT32UC3A0512-ALUT - 32-bit AVR32 MCU 66MHz 512KB Flash LQFP-144
부품 번호: AT32UC3A0512-ALUT ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $12.45 | $12.45 |
| 10 | $11.28 | $112.80 |
| 100 | $9.95 | $995.00 |
| 500 | $8.74 | $4,370.00 |
| 1,000 | $7.62 | $7,620.00 |
AT32UC3A0512-ALUT 개요
An MCU (Microcontroller Unit) is a single-chip computer that combines a processor, memory, and programmable I/O. The 32-bit AVR32 UC3 family belongs to the broader category of embedded microcontrollers -> RISC processors -> semiconductors -> integrated circuits, designed for cost-sensitive embedded applications with particular emphasis on low power consumption, high code density, and high computational throughput. The AVR32 core implements a compact single-cycle RISC instruction set including DSP extensions, with the AT32UC3A0512 reaching approximately 1.38 DMIPS/MHz.
Key specifications include 1.65 V to 3.6 V supply voltage operation, 66 MHz maximum CPU clock, 512 KB on-chip Flash program memory, 64 KB SRAM, integrated 10/100 Mbps Ethernet MAC, USB 2.0 full-speed On-The-Go controller, multi-layer AHB bus architecture, and a built-in audio DAC with I2S interface. The device supports external memory bus interfaces and provides extensive connectivity for embedded networking, audio, and human-machine-interface designs.
The AVR32 UC3 core uses a Harvard-style architecture with separate instruction and data paths to the Flash and SRAM subsystems, enabling single-cycle instruction fetch and high deterministic interrupt latency. The integrated audio DAC and I2S make the part particularly well-suited for consumer audio applications, while the Ethernet MAC and USB OTG target industrial connectivity and embedded host stacks. The architecture includes read-modify-write atomic bit manipulation and DSP instruction extensions for signal-processing workloads.
Typical applications include industrial Ethernet gateways, USB audio peripherals, point-of-sale terminals, smart energy metering, motor control front-ends, and embedded HMI panels. The combination of high-performance 32-bit compute with on-chip audio and networking peripherals enables the application to consolidate multiple discrete ICs into a single chip, reducing BOM cost and PCB footprint.
Design considerations for this device include thermal management of the 20x20 mm LQFP-144 footprint, careful PCB layout for USB and Ethernet differential pairs, and adequate decoupling near the multiple VDD pins. Engineers should consult the AVR32 UC3 Technical Reference Manual for detailed peripheral programming guidance and the datasheet's electrical characteristics section before committing to a layout.
This page synthesizes distributor pricing, an Octopart inventory view, Microchip cross-reference guidance, and practical design notes not found in the manufacturer datasheet, supporting both initial component evaluation and long-term re-purchase decisions.
드롭인 대체품: AT32UC3A0512-ALUT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: AT32UC3A0512-ALUT (동일 폼 팩터 및 풋프린트) — 차이점: Core Architecture, Ethernet, Package, USB.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
AT32UC3A0512-ALUR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A0512AU-ALUT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A0512-ALTRA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A3256-ALUT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A364-ALUT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A0128AU-ALUT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AT32UC3A0512-ALUT 최대 정격 & 전기적 특성
| Core Architecture | AVR32 UC3 (AVR32UC RISC) |
| CPU Bit Width | 32-bit |
| Maximum CPU Frequency | 66 MHz |
| DMIPS/MHz | 1.38 DMIPS/MHz |
| Performance | 75 DMIPS at 60 MHz from Flash |
| Program Memory (Flash) | 512 KB (512K x 8) |
| Data Memory (SRAM) | 64 KB |
| Supply Voltage (Vcc/Vdd) | 1.65 V to 3.6 V |
| 패키지 | 144-LQFP (20x20 mm) |
| 실장 유형 | Surface Mount |
| Ethernet | 10/100 Mbps MAC integrated |
| USB | USB 2.0 Full-Speed (12 Mbps) with embedded host |
| Audio Interface | I2S + built-in audio D/A converter |
| RoHS 상태 | Compliant |
AT32UC3A0512-ALUT 144-lqfp (20x20 mm) 핀 구성 가이드
AT32UC3A0512-ALUT(144-lqfp (20x20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AT32UC3A0512-ALUT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AT32UC3A0512-ALUT 적합 용도: 7 애플리케이션s: Industrial Ethernet Gateway, USB Audio Peripheral, Smart Energy / Metering Endpoint, Point-of-Sale (POS) Terminal Controller, Embedded HMI / Control Panel, USB-Connected Audio Streaming Device, Motor Control Front-End Controller.
Industrial Ethernet Gateway
The AT32UC3A0512-ALUT's integrated 10/100 Ethernet MAC, 66 MHz AVR32 core, and 512 KB Flash make it well suited for industrial Ethernet gateway designs such as Modbus TCP, EtherNet/IP nodes, and protocol-conversion bridges. Its 1.38 DMIPS/MHz headroom handles TCP/IP stacks plus application logic, while the 64 KB SRAM sustains packet reassembly buffers without external memory. Compared to an MCU + external Ethernet controller two-chip approach, the integrated MAC eliminates BOM cost and frees PCB area for isolation barriers. Engineers should add an external PHY (such as a Microchip KSZ8041 or similar) and follow RMII layout guidance for 100 Mbps signals.
추천
USB Audio Peripheral
With integrated USB 2.0 full-speed On-The-Go, I2S interface, and a built-in stereo audio D/A converter, the AT32UC3A0512-ALUT is purpose-built for USB audio peripherals such as USB headphones, USB audio DACs, and USB-to-I2S bridges. The 66 MHz core handles USB isochronous transfers and audio sample-rate conversion in real time, while the integrated audio DAC removes the need for an external DAC chip. The 512 KB Flash supports USB audio class firmware stacks, and the 64 KB SRAM holds multiple audio sample frames for jitter-free playback. Use a 12 MHz crystal for USB full-speed clock accuracy and follow USB differential-pair layout rules for the DP/DM lines.
추천
Smart Energy / Metering Endpoint
The AT32UC3A0512-ALUT fits smart energy metering endpoints that need 32-bit compute for power-quality DSP, integrated Ethernet for AMR/AMI backhaul, and ample Flash for metering firmware stacks. Its 1.38 DMIPS/MHz performance runs harmonic analysis and RMS calculations alongside TCP/IP communication, while the 512 KB Flash supports metering libraries plus secure firmware update storage. The 1.65-3.6 V supply range accepts battery-backed rails typical in metering hardware. For metering-accuracy designs, add a companion 24-bit sigma-delta ADC for current/voltage sensing and a galvanic isolator on the communication port.
추천
Point-of-Sale (POS) Terminal Controller
POS terminals benefit from the AT32UC3A0512-ALUT's combination of Ethernet, USB host, and audio DAC, supporting payment-terminal controller boards with network connectivity, USB peripherals (keyboards, magstripe readers, printers), and audio prompts. The 512 KB Flash stores payment application firmware with security libraries, and the 66 MHz core runs transaction-encryption routines within the latency budget. Its 144-LQFP package gives generous pin count for connecting multiple peripherals. Pair with a secure crypto-authentication IC for payment security and a touchscreen controller for the operator display.
추천
Embedded HMI / Control Panel
Human-machine interface panels benefit from the AT32UC3A0512-ALUT's 66 MHz 32-bit performance, integrated Ethernet for factory-networked HMI, and 512 KB Flash for graphical firmware stacks. The device drives TFT displays through external display controllers and supports touch input via I2C/SPI peripherals. The 144-LQFP package provides the GPIO count needed for keypad scanning, LED indicators, and rotary encoders. With its 1.65-3.6 V supply range, the part fits 3.3 V industrial HMI designs. Use opto-isolated digital inputs for industrial safety compliance and a 32.768 kHz crystal for RTC functions.
추천
USB-Connected Audio Streaming Device
Networked audio streaming devices such as Wi-Fi/Ethernet-connected speakers and USB-to-network audio bridges leverage the AT32UC3A0512-ALUT's combined USB 2.0 OTG, I2S audio interface, and 10/100 Ethernet MAC. The integrated audio DAC drives headphone outputs directly, while Ethernet supports streaming protocols like AirPlay, DLNA, or proprietary networked-audio stacks. The 512 KB Flash accommodates streaming-protocol libraries plus audio-processing firmware, and the 66 MHz core handles real-time audio buffering with minimal jitter. Add a Wi-Fi companion module for wireless streaming variants and an external class-D amplifier for higher-output designs.
추천
Motor Control Front-End Controller
The AT32UC3A0512-ALUT's 66 MHz AVR32 core, 64 KB SRAM, and DSP instruction set support motor-control front-end tasks such as field-oriented control (FOC) preprocessing, encoder feedback, and EtherCAT/CANopen command handling. The 512 KB Flash accommodates motor-control libraries plus networking stacks, while the integrated Ethernet MAC drives EtherCAT slave or Ethernet/IP nodes. For high-current 3-phase drive stages, pair the MCU with external gate drivers and power MOSFETs/IGBTs. The 144-LQFP package gives ample GPIO for current sensing, PWM outputs, and communication interfaces in a single chip.
추천
추천 제품 요약
엔지니어링 참조 데이터: AT32UC3A0512-ALUT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AT32UC3A0512-ALUR | AT32UC3A0512AU-ALUT | AT32UC3A0512-ALTRA | AT32UC3A3256-ALUT | AT32UC3A364-ALUT | AT32UC3A0128AU-ALUT |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB | 64 KB | 128 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB | 128 KB |
| Max CPU Frequency | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 84 MHz | 84 MHz | 66 MHz |
| USB | FS OTG + embedded host | FS OTG + embedded host | FS OTG + embedded host | FS OTG + embedded host | FS OTG + embedded host | FS OTG + embedded host | FS OTG + embedded host |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Integrated 10/100 Ethernet MAC, USB 2.0 FS OTG, I2S, and audio DAC in a single chip (vs AT32UC3A3256-ALUT)
- Larger Flash density supports richer firmware stacks (vs AT32UC3A364-ALUT)
- Built-in audio DAC eliminates a companion IC (vs AT32UC3A0128AU-ALUT)
설계 노트
Place a 100 nF decoupling capacitor as close as possible to every VDD/VDDCORE pin pair, and add a bulk 10 uF ceramic or 22 uF tantalum near the package to support USB and Ethernet burst currents. The 1.65-3.6 V supply range allows direct LDO connection, but a switching regulator is preferred when total board current exceeds 200 mA. Keep the AWK analog supply filtered separately from digital supplies to reduce Ethernet MAC and audio DAC noise coupling.
Route USB DP/DM as a 90-ohm differential pair with matched length to within 150 mil and keep the pair away from switching regulators and clock traces. For 100 Mbps Ethernet RMII/MII, maintain 50-ohm single-ended impedance and route clock and data traces with matched lengths. Place the 144-LQFP thermal pad on a continuous ground pour with multiple vias to a dedicated ground plane for thermal dissipation up to the 1.0 W package limit.
Do not exceed the 66 MHz maximum CPU clock, and ensure the input crystal or external clock meets AVR32 UC3 jitter specifications. Confirm JTAG/debug pin connections before powering the board, since missing debug access can prevent firmware recovery on locked parts. The integrated audio DAC requires the I2S clock domain to be configured correctly; mismatched sample rates produce distortion. Also note that the AT32UC3A0512-ALUT is NRND - design new projects with Microchip's SAM4S/SAME70 Cortex-M migration path in mind.
The AVR32 UC3 core can produce sharp edge rates on GPIO and high-speed peripherals; series-terminate clock and high-speed signals with 22-33 ohm resistors near the driver. Keep Ethernet MII/RMII traces short (< 50 mm) and isolated from I/O to maintain signal integrity. For USB, the DP/DM trace length matching and differential impedance are more important than absolute trace length - use the 90-ohm differential impedance requirement as the primary design constraint.
규정 준수 정보
RoHS compliant per Microchip product declaration. AEC-Q100 not qualified - the part targets industrial/consumer applications, not automotive. Halogen-free status unknown from verified web data. The AT32UC3A0512-ALUT is classified as NRND per Microchip's lifecycle policy as of 2026-10-06.
