ATMEGA4808-MF - 8-bit AVR MCU 20MHz 48KB Flash QFN-32 | Microchip
부품 번호: ATMEGA4808-MF ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $2.26 | $2.26 |
| 10 | $2.1 | $21.00 |
| 100 | $1.95 | $195.00 |
| 500 | $1.8 | $900.00 |
| 1,000 | $1.7 | $1,700.00 |
ATMEGA4808-MF 개요
A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. The megaAVR 0-series sits within Microchip's 8-bit MCU portfolio, positioned above the tinyAVR series and below the 32-bit SAM series, and is a common choice for embedded control, consumer, and industrial products.
Key features include a 20 MHz AVR CPU with hardware multiplier, 48 KB of self-programmable Flash with a separate EEPROM for non-volatile data storage, a 10-bit ADC with 12 external channels, and multiple communication peripherals including USART, SPI, and TWI (I2C) interfaces. According to the Microchip product page, the ATmega4808 is offered in 28- and 32-pin packages, with the MF suffix denoting the 32-pin VQFN in industrial temperature range.
The AVR core executes most instructions in a single clock cycle, delivering efficient C-code performance and low interrupt latency. Hardware support for events, configurable custom logic, and flexible timers (TCA/TCB/TCD in the megaAVR 0-series architecture) allow many tasks to run without CPU intervention, reducing power consumption in sleep-heavy applications. A unified address space and a single-cycle hardware multiplier simplify math-intensive firmware.
Typical applications include consumer appliances, industrial sensing nodes, HVAC controls, and general-purpose embedded boards - the ATmega4808 is also widely cited as a modern successor to the classic ATmega328P used in Arduino platforms, and is supported by the open-source MegaCoreX Arduino hardware package.
Design considerations: the VQFN-32 footprint requires careful PCB land-pattern design, and the UPDI programming interface replaces legacy ISP, so programmers must support one-wire UPDI. Verify the operating voltage range against your power rail before layout.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-18.
드롭인 대체품: ATMEGA4808-MF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATMEGA4808-MF (동일 폼 팩터 및 풋프린트) — 차이점: Core Processor, Programming Interface, Flash Memory, SRAM, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATMEGA3208-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.98 / 개
데이터시트 보기 →ATMEGA1608-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.94 / 개
데이터시트 보기 →ATMEGA808-MF
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$0.95 / 개
데이터시트 보기 →ATMEGA4808-MFR
✅ 드롭인✓ 재고 있음
$0.82 / 개
데이터시트 보기 →ATMEGA4808-MF 최대 정격 & 전기적 특성
| Core Architecture | 8-bit AVR RISC with hardware multiplier |
| 최대 클록 주파수 | 20 MHz |
| Flash Memory | 48 KB (24K x 16) |
| SRAM | 6 KB |
| EEPROM | 256 bytes |
| 패키지 | 32-VFQFN (5x5 mm) |
| ADC Resolution | 10-bit |
| ADC Channels | 12 external channels |
| 동작 온도 | -40C to +105C (industrial, MF suffix) |
| Communication Interfaces | USART, SPI, TWI (I2C) |
| Timers | 16-bit TCA, TCB, TCD (megaAVR 0-series) |
| Programming Interface | UPDI (Unified Program and Debug Interface) |
| 실장 유형 | Surface Mount |
| Family | megaAVR 0-series (AVR mega) |
| RoHS 상태 | Compliant |
ATMEGA4808-MF 32-vfqfn (5x5 mm) 핀 구성 가이드
ATMEGA4808-MF(32-vfqfn (5x5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATMEGA4808-MF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATMEGA4808-MF 적합 용도: 6 애플리케이션s: Industrial Sensor Nodes, Consumer Appliance Control, HVAC and Building Control, Arduino-Compatible Prototyping, Lighting and PWM Control Systems, IoT End Nodes.
Industrial Sensor Nodes
The ATMEGA4808-MF fits industrial sensing nodes where a 10-bit ADC with 12 external channels digitizes multiple analog sensors on one chip, and the 48 KB Flash accommodates protocol stacks and data logging. Its -40C to +105C industrial temperature range covers control-cabinet and outdoor environments, while Core Independent Peripherals time-accurately sample and generate waveforms without CPU load. Firmware typically uses USART or TWI to forward readings to a PLC gateway; the 20 MHz AVR core handles both acquisition and communications with margin.
추천
Consumer Appliance Control
Washing machines, coffee makers, and small appliances need low-cost MCUs with robust timer and ADC resources - the ATMEGA4808-MF delivers both in a compact 32-pin VQFN. Multiple hardware timers drive motors, heaters, and user-interface LEDs with precise PWM, while the 10-bit ADC reads temperature sensors and user potentiometers. The 256-byte EEPROM stores calibration and user settings through power cycles. At roughly $2.26 single-unit pricing as of 2026-09-18, it meets aggressive consumer BOM targets while providing 48 KB Flash for future firmware expansion.
추천
HVAC and Building Control
HVAC controllers benefit from the ATMEGA4808-MF's combination of industrial temperature rating (-40C to +105C), multiple USART/TWI interfaces for connecting humidity and temperature sensors, and hardware PWM for fan and damper motor control. The 6 KB SRAM supports state-machine-based control logic and buffering for LCD user interfaces. Sleeping between control cycles keeps average current low in thermostat-style products, and the UPDI interface enables field reprogramming through a single wired test point on production boards.
추천
Arduino-Compatible Prototyping
The ATMEGA4808 is a recognized modern successor to the ATmega328P in hobbyist and prototyping contexts. The open-source MegaCoreX Arduino hardware package provides full Arduino IDE support for ATmega4808, ATmega4809, and related megaAVR 0-series parts, letting designers leverage the Arduino ecosystem while gaining 48 KB Flash, 20 MHz performance, and UPDI debugging. Community analyses highlight that it is not register-compatible with the 328P, so libraries using direct port access need porting - but standard Arduino API sketches port readily.
추천
Lighting and PWM Control Systems
LED drivers and dimming controllers use the ATMEGA4808-MF's TCA/TCB/TCD timer suite to generate phase-correct and high-resolution PWM outputs without CPU intervention, leaving the 20 MHz core free for communication and button handling. The 10-bit ADC reads ambient light sensors, potentiometers, or thermal feedback from LED boards, enabling closed-loop brightness and thermal foldback. The 48 KB Flash holds color-mixing algorithms and DMX-style serial receivers, and the QFN-32 package fits compact LED driver PCBs.
추천
IoT End Nodes
In battery- and mains-powered IoT end nodes, the ATMEGA4808-MF acts as the sensor/aggregation controller that sleeps between events, samples the 10-bit ADC on wake, and streams data over USART or SPI to a wireless module. The megaAVR 0-series event system and configurable peripherals reduce wake latency and CPU overhead, extending battery life. The 256-byte EEPROM stores device identity and calibration data, while 48 KB Flash retains room for OTA-style bootloader code alongside the application image.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATMEGA4808-MF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATMEGA3208-MF | ATMEGA1608-MF | ATMEGA808-MF | ATMEGA4808-MFR |
|---|---|---|---|---|---|
| Package | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 48 KB | 32 KB | 16 KB | 8 KB | 48 KB |
| SRAM | 6 KB | 4 KB | 2 KB | 1 KB | 6 KB |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC | 10-bit, 12 ch | 10-bit, 12 ch | 10-bit, 12 ch | 10-bit, 12 ch | 10-bit, 12 ch |
| Programming Interface | UPDI | UPDI | UPDI | UPDI | UPDI |
주요 차별점
- Largest Flash in the 32-pin megaAVR 0-series family (vs ATMEGA3208-MF)
- Lowest-cost footprint-compatible variants available (vs ATMEGA808-MF)
- Modern UPDI single-wire debug (vs ATMEGA328P-PU (legacy))
설계 노트
The 32-pin VQFN (5x5 mm) package requires a precise land pattern per the datasheet package outline. Solder the exposed die-attach pad to a ground plane through an array of 4-6 vias to achieve both thermal dissipation and a low-inductance ground return. Use a solder-paste stencil aperture reduction of roughly 10-20% on fine 0.5 mm-pitch pads to prevent bridging during reflow, and confirm the paste profile against the MSL rating printed on the moisture-barrier bag.
The ATmega4808 programs via UPDI only - there is no legacy ISP. Ensure every production PCB exposes the UPDI pin (PA0) on a test point or header, and stock a UPDI-capable programmer (MPLAB Snap, PICkit 4, Atmel-ICE, or a serial UPDI adapter). Firmware written with direct port/register access for the ATmega328P will not compile unchanged; MegaCoreX Arduino support eases migration but does not provide register-level compatibility.
Estimated: place a 100 nF ceramic decoupling capacitor directly across each VDD pin pair, within 2-3 mm of the package, plus one bulk 4.7-10 uF capacitor per supply rail. Verify the final supply rail against the datasheet operating voltage range (mark [DATA_NEEDED] above) before layout sign-off, and confirm brown-out detector settings in fuses so the MCU does not execute corrupted code during slow supply ramps.
규정 준수 정보
RoHS compliance inferred from Microchip standard product labeling on distributor listings; AEC-Q100 automotive qualification is not claimed for this part (use ATMEGA32M1 family for automotive). Verify REACH and conflict-minerals status on Microchip's official compliance pages.
