ATSAM4E16CA-AUR - 120MHz Cortex-M4 1MB Flash MCU | Microchip
부품 번호: ATSAM4E16CA-AUR ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $11.49 | $11.49 |
| 10 | $10.34 | $103.40 |
| 100 | $9.19 | $919.00 |
| 500 | $8.62 | $4,310.00 |
| 1,000 | $8.05 | $8,050.00 |
ATSAM4E16CA-AUR 개요
A microcontroller (MCU) is a complete computing system on a single chip, combining a processor core, program memory, data memory, and a rich set of peripherals. The SAM4E family sits within Microchip's ARM-based MCU hierarchy: Cortex-M4 core -> SAM4E series -> ARM MCU portfolio -> embedded processing, serving as the central controller in a larger system of sensors, actuators, and communication interfaces.
Key features include the 120 MHz Cortex-M4 with FPU for math-intensive control loops, 1 MB Flash for large code images with in-field update capability, dual 12-bit ADCs (16 channels) and dual 12-bit DACs (2 channels), and an integrated Ethernet controller that eliminates an external MAC. Peripherals such as USB, USARTs, SPI, and a PWM controller support connectivity and motion control applications.
Technically, the SAM4E16C uses a high data bandwidth multi-layer bus architecture with the 2 KB cache improving flash execution efficiency at 120 MHz. Supply voltage spans 1.62 V to 3.6 V, with the core powered internally from 1.2 V per the datasheet, and an internal oscillator simplifies clocking.
Typical applications include industrial networking nodes, Ethernet-connected IoT gateways, motor control and power conversion, and building automation controllers.
A key design consideration: the ADC reference and analog supply require clean routing on the VDDA pin, and full 120 MHz operation should be validated across the 1.62 V to 3.6 V supply range per Microchip's electrical characteristics.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: ATSAM4E16CA-AUR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAM4E16CA-AUR (동일 폼 팩터 및 풋프린트) — 차이점: Packaging, RoHS Status, SRAM, Package, Core Processor.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAM4E16CA-AU
✅ 드롭인✓ 재고 있음
$7.65 / 개
데이터시트 보기 →ATSAM4E16CA-AN
✅ 드롭인✓ 재고 있음
$8.05 / 개
데이터시트 보기 →ATSAM4E8CA-AUR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ATSAM4SD16CA-ANR
✅ 드롭인✓ 재고 있음
$6.72 / 개
데이터시트 보기 →ATSAM4S16CA-AUR
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →ATSAM4E16CA-AUR 최대 정격 & 전기적 특성
| Core | ARM Cortex-M4 with 2 KB cache |
| Core Clock Frequency | 120 MHz |
| Core Width | 32-bit |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB (128K x 8) |
| Supply Voltage (VCC/VDD) | 1.62 V to 3.6 V |
| FPU | Yes (Floating Point Unit) |
| DSP Instructions | Yes |
| Memory Protection Unit (MPU) | Yes |
| ADC | 16 x 12-bit |
| DAC | 2 x 12-bit |
| Oscillator Type | Internal |
| 동작 온도 | -40C to +85C |
| 패키지 | 100-LQFP (14x14 mm) |
| 실장 유형 | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Product Status | Active |
| RoHS 상태 | RoHS3 Compliant |
ATSAM4E16CA-AUR 100-lqfp (14x14 mm) 핀 구성 가이드
ATSAM4E16CA-AUR(100-lqfp (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAM4E16CA-AUR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAM4E16CA-AUR 적합 용도: 6 애플리케이션s: Industrial Ethernet Networking Nodes, IoT Gateways and Connected Devices, Motor Control and Power Conversion, Building Automation Controllers, Test and Measurement Instrumentation, Embedded Security and Access Control.
Industrial Ethernet Networking Nodes
The ATSAM4E16CA-AUR is purpose-built for networked industrial equipment because it integrates a 10/100 Mbps Ethernet MAC, removing the need for an external media access controller and reducing BOM count and board area. Running the Cortex-M4 core at 120 MHz with a 2 KB cache provides sufficient headroom for TCP/IP stacks such as lwIP alongside the application. The 1 MB Flash accommodates protocol stacks, web servers, and firmware-update images, while the 128 KB SRAM buffers packets and runtime data. Placed with an external Ethernet PHY (for example, a KSZ8081RNA) on an RMII interface, the MCU delivers a complete connected node with a -40C to +85C industrial rating suitable for factory-floor installations.
추천
IoT Gateways and Connected Devices
For IoT gateway designs, the ATSAM4E16CA-AUR offers the right balance of connectivity and processing: the integrated Ethernet MAC handles upstream backhaul, USARTs and SPI bridge to wireless modules and sensors, and the 120 MHz FPU-equipped core executes protocol translation efficiently. The 1 MB Flash supports secure firmware upgrade with room for both application and bootloader partitions, and the internal oscillator simplifies clocking design for cost-sensitive connected devices. Supply operation from 1.62 V to 3.6 V aligns with standard 3.3 V single-rail designs. With 16 ADC channels available, the same device can also digitize local sensor inputs, allowing one MCU to serve both gateway and local acquisition roles in smart building and metering products.
추천
Motor Control and Power Conversion
The ATSAM4E16CA-AUR fits motor control because its Cortex-M4 with hardware FPU and DSP instructions executes field-oriented control (FOC) loops with fast multiply-accumulate and single-cycle float operations at 120 MHz. The 16-channel 12-bit ADC samples phase currents and bus voltage, and the PWM controller generates inverter drive signals. According to the SAM4E datasheet, the high data bandwidth architecture sustains deterministic loop timing with the 2 KB cache. Operating across 1.62 V to 3.6 V and -40C to +85C, it suits industrial drives, solar inverters, and HVAC blowers, where the dual 12-bit DACs can also provide analog control references for power stage supervision.
추천
Building Automation Controllers
Building automation controllers benefit from the ATSAM4E16CA-AUR's combination of Ethernet networking, industrial temperature rating, and rich mixed-signal integration. The Ethernet MAC supports BACnet/IP and Modbus TCP implementations directly, while multiple USARTs handle RS-485 field bus segments through external transceivers. The 1 MB Flash stores protocol stacks plus application logic with headroom for over-the-air updates, and 128 KB SRAM holds concurrent connection buffers. The 12-bit ADC channels digitize temperature and humidity sensor inputs locally, and the -40C to +85C rating covers rooftop and mechanical-room environments. Single 3.3 V supply operation simplifies power tree design in compact wall-mounted controller enclosures.
추천
Test and Measurement Instrumentation
In portable and bench instrumentation, the ATSAM4E16CA-AUR provides the signal acquisition and human-interface processing in one device: the 16-channel 12-bit ADC captures sensor data up to the converter's rated throughput, the FPU performs calibration and DSP filtering in hardware, and USB connectivity streams results to a host PC. The 120 MHz core with 2 KB cache sustains responsive menu-driven LCD interfaces while servicing acquisition interrupts. The internal oscillator reduces board component count in handheld instruments, and the 100-pin LQFP exposes enough GPIO for keypad matrices, display buses, and relay control. Microchip's development ecosystem (SAM4E Xplained Pro, Atmel Studio / MPLAB X) accelerates firmware bring-up.
추천
Embedded Security and Access Control
Access control panels and security controllers leverage the ATSAM4E16CA-AUR's memory capacity and connectivity: 1 MB Flash stores credential databases, encryption libraries, and event logs, while the Ethernet MAC enables networked door controllers managed from a central server. The Cortex-M4 MPU allows privilege separation between the application and communication stack, improving firmware robustness. Dual 12-bit ADCs read tamper and analog sensor inputs, and multiple USARTs interface to RFID readers and keypads. The industrial temperature range suits outdoor gate and parking installations, and the active lifecycle status from Microchip ensures long-term sourcing for security products with multi-year service commitments.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAM4E16CA-AUR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAM4E16CA-AU | ATSAM4E16CA-AN | ATSAM4E8CA-AUR | ATSAM4SD16CA-ANR | ATSAM4S16CA-AUR |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (14x14 mm) | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same | 100-LQFP (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Clock | Cortex-M4 @ 120 MHz (FPU) | Cortex-M4 @ 120 MHz (FPU) | Cortex-M4 @ 120 MHz (FPU) | Cortex-M4 @ 120 MHz (FPU) | Cortex-M4 @ 120 MHz (FPU) | Cortex-M4 @ 120 MHz (FPU) |
| Flash Memory | 1 MB | 1 MB | 1 MB | 512 KB (-50%) | 1 MB (dual-bank) | 1 MB |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | No (SAM4S family) | No (SAM4S family) |
| Supply Voltage | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V | 1.62 V to 3.6 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging / Lifecycle | Tape & Reel, Active | Tray, Active | Tray, Active | Tape & Reel, Active | Tray, Active | Tape & Reel, Active |
주요 차별점
- Integrated 10/100 Ethernet MAC (vs ATSAM4S16CA-AUR)
- Full 1 MB Flash in the same footprint (vs ATSAM4E8CA-AUR)
- Cortex-M4 FPU and DSP acceleration at 120 MHz (vs ATSAM4SD16CA-ANR)
설계 노트
Design a single 3.3 V rail within the 1.62 V to 3.6 V operating window; the datasheet states the core runs internally at 1.2 V from the on-chip regulator, so do not drive the core rail externally. Estimated: at 120 MHz with typical activity, core plus I/O consumption is on the order of tens of mA, so a 500 mA-capable LDO budget is generally adequate for the MCU plus a PHY. Place decoupling on every VDD pin pair and follow the datasheet's regulator output capacitor recommendation to guarantee stability.
Route VDDA/GNDA as a quiet analog island: star-connect the analog ground to the digital ground at one point, filter VDDA through an RC (e.g., 10 ohm + 1 uF as an estimate consistent with standard practice), and keep ADC input traces away from Ethernet RMII and USB differential pairs. The 100-LQFP 14x14 mm footprint needs symmetric thermal pad patterns per the package drawing; use the Microchip LQFP-100 reference land pattern to avoid solder bridging on the 0.5 mm pitch pins.
Ethernet MAC requires an external PHY - the on-chip block alone cannot connect to a magnetics/JACK; plan RMII/PHY clocking correctly. Also note Microchip's advisory that Revision B is highly recommended for new designs and production, so order and qualify Rev B silicon rather than older stock. Finally, confirm that your purchased Tape & Reel suffix (-AUR) matches your assembly feeder setup; the -AU tray variant is otherwise electrically identical.
규정 준수 정보
RoHS3 compliant per Microchip USA product data; Mouser lists 'LQFP Green' packaging, indicating green/lead-free construction. REACH, halogen-free, and conflict-minerals status not stated in provided data.