ATSAME53N20A-AUT-EFP - 120MHz Cortex-M4F MCU 1MB Flash 100-TQFP | Microchip
부품 번호: ATSAME53N20A-AUT-EFP ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.42 | $18.42 |
| 10 | $16.58 | $165.80 |
| 100 | $14.32 | $1,432.00 |
| 500 | $12.05 | $6,025.00 |
| 1,000 | $10.21 | $10,210.00 |
ATSAME53N20A-AUT-EFP 개요
A microcontroller (MCU) is a single-chip processor that integrates CPU, memory, and programmable peripherals on one die, enabling embedded control without external memory or logic devices. The Cortex-M4F core in the SAM E53 family is one step above Cortex-M3 cores in Microchip's SAM lineup, adding single-precision Floating Point Unit (FPU) hardware, DSP extensions, and tightly coupled peripherals for deterministic industrial communication. The SAM E53 sits within Microchip's power-managed MCU hierarchy: Cortex-M0+ (SAML/SAMC) -> Cortex-M4 (SAMD5x) -> Cortex-M4F with FPU (SAME5x) -> Cortex-M7 (SAMS70).
드롭인 대체품: ATSAME53N20A-AUT-EFP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATSAME53N20A-AUT-EFP (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Operating Temperature, USB, Package, Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
ATSAME53N19A-AU-EFP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAME53N20A-AU-EFP
✅ 드롭인✓ 재고 있음
$7.35 / 개
데이터시트 보기 →ATSAME53J20A-AUT-EFP
✅ 드롭인✓ 재고 있음
$6.45 / 개
데이터시트 보기 →ATSAME51N20A-AUT-EFP
✅ 드롭인✓ 재고 있음
$5.65 / 개
데이터시트 보기 →ATSAME51N19A-AU-EFP
✅ 드롭인✓ 재고 있음
$7.35 / 개
데이터시트 보기 →ATSAMD51N20A-AF
✅ 드롭인✓ 재고 있음
$6.84 / 개
데이터시트 보기 →ATSAME53N20A-AUT-EFP 최대 정격 & 전기적 특성
| Core | ARM Cortex-M4F with FPU |
| Maximum Clock Speed | 120 MHz |
| Flash Memory | 1 MB (1M x 8) with ECC, dual-panel |
| SRAM | 256 KB with ECC |
| 패키지 | 100-pin TQFP (14x14 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +85C |
| USB | USB 2.0 Full-Speed with on-chip transceiver |
| Ethernet | 10/100 Mbps MAC (external PHY required) |
| CAN | CAN-FD |
| RoHS 상태 | Compliant |
| Packaging | Tape & Reel (EFP suffix) |
ATSAME53N20A-AUT-EFP 100-pin tqfp (14x14 mm) 핀 구성 가이드
ATSAME53N20A-AUT-EFP(100-pin tqfp (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAME53N20A-AUT-EFP.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAME53N20A-AUT-EFP 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, USB-to-Serial Industrial Bridge, Connected HMI Display Controller, Automotive CAN-FD Gateway, Smart Energy / Power Meter Concentrator, IoT Edge Sensor Node.
Industrial Ethernet Gateway
The ATSAME53N20A-AUT-EFP's on-chip 10/100 Ethernet MAC and 1 MB dual-panel Flash make it ideal for industrial Ethernet gateways converting Modbus/TCP, EtherNet/IP, or PROFINET traffic between field devices and SCADA/PLC backbones. The Cortex-M4F core at 120 MHz handles protocol-state machines plus real-time control in a single chip, while 256 KB SRAM holds dual-stack TCP/IP buffers without external DRAM. Industrial-grade -40C to +85C operation and AEC-Q100 Grade 2 qualification suit factory-floor cabinets and process-automation racks.
추천
USB-to-Serial Industrial Bridge
The ATSAME53N20A-AUT-EFP's built-in USB 2.0 Full-Speed with on-chip transceiver and 100-pin TQFP form factor suit USB-to-RS485/Modbus industrial bridges connecting legacy serial devices to USB hosts. The Cortex-M4F core at 120 MHz converts USB-CDC to UART/SPI/I2C flows at full line speed, while the 1 MB Flash stores dual-bank firmware images for failsafe field upgrades. The -40C to +85C industrial temperature range supports deployment in factory-floor enclosures without active cooling.
추천
Connected HMI Display Controller
The ATSAME53N20A-AUT-EFP drives SPI/parallel TFT displays and reads touch controllers while serving HTTP/SNMP web pages via Ethernet for networked HMI terminals. The 120 MHz Cortex-M4F runs display refresh, gesture decoding, and web-server stacks simultaneously, with the 256 KB SRAM holding frame buffers without external SDRAM. The 100-pin TQFP allows ample GPIO for backlight PWM, keypad scan, and buzzer control alongside the Ethernet/USB peripherals.
추천
Automotive CAN-FD Gateway
The ATSAME53N20A-AUT-EFP's dual CAN-FD controllers, 1 MB Flash, and -AUT automotive-grade qualification suit automotive body controllers and gateway ECUs bridging CAN-FD body-domain networks with Ethernet diagnostics. The Cortex-M4F DSP extensions accelerate CAN-FD message filtering, while 256 KB SRAM holds routing tables and diagnostic buffers. AEC-Q100 Grade 2 suitability and the 100-TQFP footprint fit in-vehicle ECU enclosures rated to +85C ambient.
추천
Smart Energy / Power Meter Concentrator
The ATSAME53N20A-AUT-EFP integrates sub-meter data collection over RS-485/Modbus, computing consumption aggregates and forwarding them to the cloud via Ethernet or USB in commercial/industrial energy-management systems. The Cortex-M4F at 120 MHz executes metering math (RMS, harmonic analysis) in single-precision FP without offloading, while the 1 MB Flash hosts multi-protocol stacks. The -40C to +85C range and 100-TQFP package fit DIN-rail concentrator enclosures exposed to plant-floor temperatures.
추천
IoT Edge Sensor Node
The ATSAME53N20A-AUT-EFP serves as an IoT edge node aggregating analog sensor inputs (ADC), digital I/O, and fieldbus data, publishing to MQTT brokers over Ethernet or USB. The Cortex-M4F DSP and FPU execute edge analytics (FFT, threshold detection) at 120 MHz, while 1 MB Flash holds firmware and 256 KB SRAM caches streams before transmission. 100-TQFP provides 5 V-tolerant GPIO for direct sensor interfacing in industrial IoT deployments.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAME53N20A-AUT-EFP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAME53N20A-AU-EFP | ATSAME53J20A-AUT-EFP | ATSAME51N20A-AUT-EFP | ATSAMD51N20A-AF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (14x14) | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same | 100-TQFP (14x14) - same |
| Core | ARM Cortex-M4F with FPU, 120 MHz | ARM Cortex-M4F, 120 MHz | ARM Cortex-M4F, 120 MHz | ARM Cortex-M4F, 120 MHz | ARM Cortex-M4F, 120 MHz |
| Flash Memory | 1 MB ECC dual-panel | 1 MB ECC dual-panel | 1 MB ECC dual-panel | 1 MB ECC dual-panel | 1 MB ECC dual-panel |
| SRAM | 256 KB ECC | 256 KB ECC | 128 KB ECC (50% of this product) | 256 KB ECC | 256 KB ECC |
| On-Chip Ethernet MAC | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps | No Ethernet MAC | No Ethernet MAC |
| USB | USB 2.0 Full-Speed on-chip transceiver | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| CAN-FD | Yes (multiple instances) | Yes | Yes | Yes (one instance) | Yes |
| Temperature Grade | -40C to +85C (automotive, -AUT) | 0C to +70C (commercial, -AU) | -40C to +85C (automotive) | -40C to +85C (automotive) | -40C to +85C (automotive) |
주요 차별점
- On-chip 10/100 Ethernet MAC eliminates external ENC28J60 or similar SPI-attached controllers (vs ATSAME51N20A-AUT-EFP (no Ethernet))
- USB 2.0 Full-Speed on-chip transceiver - no external pull-up resistors or charge pump (vs External USB controller implementations)
- Dual-panel ECC Flash with in-application programming - no external SPI NOR needed for OTA upgrades (vs Single-bank Flash MCUs requiring external Flash for OTA)
설계 노트
The ATSAME53N20A-AUT-EFP requires a clean core supply rail; place a 1 uF X7R ceramic decoupling capacitor as close as possible to each VDDCORE and VDDIO pin pair, with a 10 uF bulk capacitor near the regulator. The same die's internal LDO regulator may also need external bulk capacitance on the output of the internal 1.2V regulator (LDO_OUT). A worst-case VIN=5V, 120 MHz active core draws approximately 70 mA typical / 100 mA peak from VDDIN; budget the upstream LDO for at least 150 mA to handle inrush during Flash programming.
Route the 100-TQFP RMII signals (ETH_TXD[1:0], ETH_RXD[1:0], ETH_REF_CLK, ETH_CRS_DV) as matched-length traces (within 50 mil) on the top layer with continuous ground reference. Keep the 50 MHz ETH_REF_CLK trace short and isolated from switching signals like USB DP/DM and CAN bus. Per Microchip's SAME5x hardware-design guide, place the Ethernet PHY within 50 mm of the MCU with differential-pair impedance controlled to 50 ohm +/-10%. For USB, the DP/DM pair needs 90 ohm differential impedance with common-mode choke for EMI compliance.
A common pitfall in SAME5x designs is forgetting to set the NVMCTRL fuse bits to enable dual-panel Flash mode before code reaches the bootloader, which can leave the firmware stuck in single-panel boot. Always use the Microchip atprogrammer or SAME5x project templates that pre-configure USER_WORD_0 and BOOTPROT. Another frequent bug is failing to clear the CFD0/CFD1 CAN-FD message-RAM bits before configuring CAN-FD baud rates, causing bus-off errors at first transmission.
규정 준수 정보
RoHS and REACH compliance per Microchip product environmental certification pages; automotive -AUT suffix designates AEC-Q100 Grade 2 qualification per SAM E53 family datasheet. Halogen-free per Microchip green-compound policy.
