ATSAMS70J21A-MN 300MHz Cortex-M7 2MB Flash | Microchip
부품 번호: ATSAMS70J21A-MN ✓ 활성ATSAMS70J21A-MN 개요
A microcontroller such as ATSAMS70J21A-MN integrates a CPU, programmable peripherals, memory, and communication interfaces into one device. Within the product hierarchy, it is an ARM Cortex-M7 microcontroller, an embedded processor, and ultimately a semiconductor used to control external hardware. Its FPU supports efficient floating-point calculations, while Flash memory provides nonvolatile program storage for firmware, configuration, and application data.
The principal device characteristics shown by the manufacturer include a 300 MHz operating speed, 2048 KB of Flash memory, 384 KB of SRAM, and a 64-QFN package. The combination of a 300 MHz Cortex-M7 core and 384 KB of SRAM provides useful working memory for protocol stacks, graphics, control loops, and moderately data-intensive embedded applications. The 64-pin package also supports integration of multiple communication and mixed-signal peripherals on a compact PCB footprint.
The SAMS70J21A family is positioned for industrial, communications, networking, human-machine-interface, and embedded control applications. Its 2 MB Flash capacity allows larger bootloaders, networking stacks, firmware update mechanisms, and application code than a small general-purpose MCU. Engineers can also use the ARM Cortex-M7 ecosystem, including SEGGER J-Link support documented for the ATSAMS70J21A family, for debugging and programming.
ATSAMS70J21A-MN uses the 64-QFN 9 x 9 mm package, while the closely related ATSAMS70J21A-AN uses a 64-LQFP 10 x 10 mm package. These package choices are not interchangeable without PCB redesign because their land patterns differ. Confirm the exact pin multiplexing, electrical limits, clock requirements, and decoupling recommendations in the manufacturer datasheet before schematic capture or PCB layout.
For a new SAMS70J21A design, validate the device revision, exposed-pad soldering requirements, power-supply sequencing, external memory interfaces, and firmware support level. The QFN thermal pad should receive a properly designed via and copper-heat-dissipation structure. This page combines the manufacturer family information with package-specific ordering guidance and practical selection criteria for engineers evaluating the ATSAMS70J21A-MN.
드롭인 대체품: ATSAMS70J21A-MN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ATSAMS70J21A-MNT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATSAMS70J21A-MN
✅ 드롭인가격 문의
데이터시트 보기 →ATSAMS70J21A-MN 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Product Family | Microchip SAM S70 |
| Processor Core | ARM Cortex-M7 |
| Maximum Operating Frequency | 300 MHz |
| Architecture | 32-bit |
| Floating Point Unit | Present |
| Flash Memory | 2048 KB |
| Flash Organization | 2M x 8 bits |
| SRAM | 384 KB |
| 패키지 | 64-QFN (9 x 9 mm) |
| 핀 수 | 64 pins |
| 실장 유형 | Surface mount |
| Flash Type | Nonvolatile Flash |
| Debugger Support | SEGGER J-Link supported for ATSAMS70J21A family |
ATSAMS70J21A-MN 64-qfn (9 x 9 mm) 핀 구성 가이드
ATSAMS70J21A-MN(64-qfn (9 x 9 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATSAMS70J21A-MN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATSAMS70J21A-MN 적합 용도: 6 애플리케이션s: Industrial Automation Controller, Industrial Ethernet Gateway, Motor Control and Digital Power, Human-Machine Interface, Networked Sensor Gateway, Audio and Communication Equipment.
Industrial Automation Controller
ATSAMS70J21A-MN fits industrial automation controllers that combine multiple real-time control loops with communication and supervisory functions. The 300 MHz ARM Cortex-M7 core provides substantial processing headroom, while the FPU accelerates filter, compensation, and motion-related calculations. Its 384 KB of SRAM supports task stacks, communication buffers, and real-time state, and 2048 KB of Flash stores control firmware, parameter tables, diagnostics, and bootloader code. The 64-QFN 9 x 9 mm footprint limits board area, although the exposed pad requires a deliberate thermal and via layout. Confirm the device temperature range and industrial qualification requirements against the exact ordering documentation before releasing production hardware.
추천
Industrial Ethernet Gateway
The ATSAMS70J21A-MN is suited to protocol-heavy industrial gateways where packet processing, local control, and data buffering must coexist. A 300 MHz Cortex-M7 core can handle Ethernet frame handling and upper-layer protocol work, while 384 KB of SRAM provides space for packet queues, connection tables, and application buffers. The 2048 KB Flash budget can hold a bootloader, communication stack, configuration data, and firmware update logic. The compact 64-QFN package supports space-constrained gateway designs, but high Ethernet transceiver activity requires careful partitioning of analog and digital circuitry. Use short, impedance-controlled communication routes and follow the manufacturer pin and decoupling guidance when laying out the controller.
추천
Motor Control and Digital Power
ATSAMS70J21A-MN can serve as the supervisory controller for digital power systems, motor drives, and multi-axis equipment. Its FPU supports faster execution of proportional-integral control, observers, and signal transforms than an integer-only microcontroller, while the 384 KB SRAM accommodates control state and diagnostic history. The processor speed leaves headroom for communications and safety monitoring alongside the primary control loop. In high-current power electronics, keep the MCU separated from switching nodes, maintain continuous ground-plane return paths, and place input filtering close to the pins. The 64-QFN exposed pad should connect to a thermal copper structure through multiple vias without compromising sensitive signal routing.
추천
Human-Machine Interface
ATSAMS70J21A-MN supports advanced human-machine interfaces that combine display control, touch processing, communications, and application logic. The 300 MHz Cortex-M7 core is suitable for graphical rendering, protocol conversion, and responsive input handling, and its 384 KB of SRAM can hold display buffers and interface state. The 2048 KB Flash capacity accommodates a bootloader, graphics assets, localization data, and application firmware. Using the 64-QFN footprint can shorten board routing and reduce terminal count, although exposed-pad soldering and inspection require process control. For display-coupled systems, separate high-current display and backlight paths from the MCU supply network to reduce ground bounce and analog noise.
추천
Networked Sensor Gateway
ATSAMS70J21A-MN is a strong fit for an edge sensor gateway that normalizes measurements, executes local rules, and forwards information over an industrial or network link. Its 384 KB of SRAM supports local buffering when connectivity is intermittent, and the 2 MB Flash capacity accommodates firmware, calibration data, and protocol handlers. The 300 MHz core can process multiple input streams and maintain responsive network tasks without requiring a separate processor. A compact 64-QFN package helps when the gateway must fit inside a small enclosure, although thermal rise and RF coupling must be considered. Separate external memory, Ethernet, and sensor interfaces through proper grounding and keep switching regulators and high-current loads away from precision analog inputs.
추천
Audio and Communication Equipment
ATSAMS70J21A-MN can coordinate audio and communications equipment when the design benefits from a high-performance Cortex-M7 core, substantial RAM, and integrated storage. Its FPU is useful for filtering, mixing, modem signal processing, and other floating-point tasks, while the 384 KB SRAM reduces pressure on external memory in multi-channel designs. The 2 MB Flash area can hold control firmware, network stacks, and update handlers. When used near audio converters or RF circuitry, use separate supply filtering and a deliberate grounding strategy to prevent digital switching activity from modulating analog rails. The 64-QFN package reduces board area but requires controlled reflow and adequate exposed-pad heat spreading.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATSAMS70J21A-MN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATSAMS70J21A-MNT | ATSAMS70J21A-MN |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Processor Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum Frequency | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 2048 KB | 2048 KB | 2048 KB |
| SRAM | 384 KB | 384 KB | 384 KB |
| Architecture | 32-bit | 32-bit | 32-bit |
| Floating Point Unit | Present | Present | Present |
| Order Configuration | MN base ordering code | MNT tape-and-reel ordering configuration | MN base ordering code |
주요 차별점
- High-performance Cortex-M7 processing in a compact QFN footprint (vs ATSAMS70J21A-MNT)
- Substantial memory for embedded workloads (vs ATSAMS70J21A-MNT)
- Compact 64-QFN package option (vs ATSAMS70J21A-AN)
설계 노트
Use the manufacturer package drawing for the 64-QFN 9 x 9 mm land pattern and exposed-pad connection. Place the thermal-pad vias close to the pad while maintaining manufacturer clearances, and provide uninterrupted copper beneath the device for heat spreading. Confirm the assembly process supports the package density and inspect exposed-pad solder fill after reflow.
Route power, ground, and decoupling connections according to the manufacturer recommended schematic and layout. Keep the high-current return path compact and avoid sharing narrow neck points between the exposed pad and system ground. Separate noisy switching-regulator paths from precision analog and communication circuitry, and use the datasheet capacitor values and ESR requirements without modification.
Assign external memories, communication interfaces, and high-speed signals during schematic review so that pin multiplexing does not force long traces or crossings. Match clock and communication routing to the interface requirements, preserve continuous reference planes, and isolate clocks from analog inputs. Validate signal integrity with the intended edge rates rather than only the 300 MHz core frequency.
Estimated junction rise equals thermal resistance from the exposed pad to ambient multiplied by device power dissipation; calculate with the actual input voltage, I/O loading, and ambient temperature. Compare the resulting junction temperature with the device limit before assigning the package copper area. A compact QFN footprint can constrain heat spreading even when the processor operates below its maximum clock continuously.
규정 준수 정보
The manufacturer family page and distributor listings do not establish the requested compliance attributes for the exact ATSAMS70J21A-MN ordering code. Verify product compliance using the exact MPN in Microchip's product documentation and declaration records.