Microchip Technology

ATTINY25-20PU - 8-Bit 20MHz AVR Microcontroller | Microchip

부품 번호: ATTINY25-20PU ✓ 활성
8-pin PDIP Package 20 MHz Speed 2 KB Memory
MOQ: 1 |

ATTINY25-20PU 개요

The Microchip Technology ATTINY25-20PU is an 8-bit AVR RISC-based CMOS microcontroller with a 20 MHz maximum clock, 2 KB of in-system programmable Flash memory, 128 bytes of SRAM, and 128 bytes of EEPROM in an 8-pin PDIP package. It provides six general-purpose I/O lines and is based on the compact ATtiny25 architecture.

An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The ATtiny25 belongs to the hierarchy of 8-bit AVR microcontrollers, embedded microcontrollers, and general-purpose semiconductor control devices. Its small memory capacity and limited I/O make it appropriate for compact control tasks rather than high-bandwidth processing or large application firmware.

Key features include 2 KB of ISP Flash, 128 bytes of EEPROM, 128 bytes of SRAM, 32 general-purpose working registers, six general-purpose I/O lines, and a 20 MHz operating speed. The in-system programming interface supports programming and configuration without removing the device from its circuit, while EEPROM provides nonvolatile storage for settings and calibration information.

The device uses Microchip's picoPower AVR architecture and combines a reduced instruction set with dedicated timer and counter functions. According to the manufacturer product page, it includes one 8-bit timer/counter with compare modes and a two-wire serial interface. These resources allow the ATTINY25-20PU to handle compact embedded-control functions such as timing, state sequencing, actuator control, and low-volume data acquisition.

Typical applications include small sensor nodes, simple motor or actuator controllers, LED lighting modules, household appliance controls, and compact industrial interface boards. Its six I/O lines are useful when the design requires a modest number of digital signals and the firmware does not require substantial storage. The DIP package also facilitates prototyping, educational work, and through-hole assembly.

When designing around the ATTINY25-20PU, reserve every I/O pin for its assigned function and check the required peripheral multiplexing carefully. Provide a stable supply and suitable decoupling close to the device, and use ISP programming access that remains electrically safe in both development and production hardware.

This page combines manufacturer specifications, package and programming guidance, application fit, and drop-in replacement assessment. It is designed to help engineers compare memory capacity, clock speed, pin compatibility, and implementation trade-offs before committing the ATtiny25 footprint to a PCB.

드롭인 대체품: ATTINY25-20PU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ATTINY25-20PU (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Clock Frequency, Mounting Type, Package.

NXP Semiconductors
Maximum Clock Frequency: 20 MHz (10 MHz bus frequency)
Mounting Type: Through Hole
Package: 8-PDIP (DIP-8)
비교 대상: ATTINY25-20PU →

ATTINY25-20P

✅ 드롭인 ⚠️ 사양 미검증
📦 DIP-8
Identical 20 MHz clock class, 2 KB Flash, 128-byte SRAM, and 128-byte EEPROM configuration; ordering suffix differs by 0% in core resources

📋 참조 대체품 (카탈로그에 없음)

ATTINY25-20PU 최대 정격 & 전기적 특성

Architecture 8-bit AVR RISC
Processor Technology picoPower AVR CMOS
최대 클록 주파수 20 MHz
Flash Memory 2 KB
Flash Organization 1K x 16 bits
EEPROM Memory 128 bytes
SRAM 128 bytes
General-Purpose I/O Lines 6
General-Purpose Working Registers 32
Timer/Counter 1 x 8-bit timer/counter with compare modes
Programming Interface In-system programming (ISP)
패키지 8-pin PDIP
실장 유형 Through-hole

ATTINY25-20PU 핀 구성

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
핀 1 PC5/RESET — General-purpose I/O line and reset input
핀 2 PC4 — General-purpose I/O line
핀 3 GND — Ground
핀 4 PB3 — General-purpose I/O line with ISP programming function
핀 5 PB2 — General-purpose I/O line with ISP programming function
핀 6 PB1 — General-purpose I/O line with ISP programming function
핀 7 PB0 — General-purpose I/O line with ISP programming function
핀 8 VCC — Power supply

일반적인 애플리케이션

ATTINY25-20PU 적합 용도: 6 애플리케이션s: Compact Sensor Node, LED Lighting Controller, Simple Motor and Actuator Control, Household Appliance Control, Industrial Interface Module, Educational and Rapid Prototyping Controller.

🧩

Compact Sensor Node

The ATTINY25-20PU fits compact sensor nodes that require digital thresholding, periodic sampling, state updates, and limited nonvolatile configuration storage. Its 20 MHz AVR core handles small control routines, while 128 bytes of EEPROM can retain calibration or operating settings. With six general-purpose I/O lines, the device can interface a switch, discrete sensor output, status indicator, and actuator command without requiring a larger package. Design the firmware around the limited 2 KB Flash and 128-byte SRAM budgets, and use the in-system programming interface for field updates.

💡

LED Lighting Controller

The ATTINY25-20PU is appropriate for compact LED lighting modules that use timed sequences, button input, status feedback, and one or more low-frequency output controls. Its timer/counter resources support periodic timing, while the AVR instruction set is sufficient for small state machines and dimming patterns. The six I/O lines leave room for control inputs and indicator outputs without requiring a larger microcontroller. Account for the 2 KB Flash limit when adding extensive effects tables, and ensure each driven LED path includes the required current handling and protection.

🔧

Simple Motor and Actuator Control

The ATTINY25-20PU can control small relays, solenoids, or low-complexity actuator mechanisms where deterministic timing and straightforward state sequencing are the main requirements. Its 20 MHz clock provides ample execution margin for basic motion or timing logic, and the 8-bit timer/counter can organize periodic tasks. A transistor or driver stage should provide the required current and voltage rather than loading an I/O pin directly. Firmware must also include appropriate startup, disable, and fault-handling behavior for the connected actuator.

🏠

Household Appliance Control

The ATTINY25-20PU suits compact household or appliance-control modules that implement button logic, timers, mode selection, and simple output interlocks. Six I/O lines support several user inputs and control outputs, while the 20 MHz AVR core can execute the real-time state machine efficiently. The device's small 8-pin PDIP package is useful for through-hole modules and manually assembled prototypes. Before committing to it, calculate code and SRAM usage for the complete control sequence and reserve the ISP interface for firmware revision and manufacturing test.

🏭

Industrial Interface Module

The ATTINY25-20PU can serve as the local controller in a small industrial interface module that converts simple digital commands into timing, status, or actuator signals. Its 20 MHz processing rate supports responsive protocol handling at modest data rates, and the EEPROM can retain configuration values. Use robust external circuitry for isolation, surge protection, and level translation where the module connects to industrial wiring. The internal controller should not be treated as a substitute for dedicated protection, isolation, or high-current drive components.

🔧

Educational and Rapid Prototyping Controller

The ATTINY25-20PU is well suited to breadboard, through-hole, and educational prototyping because it combines a 20 MHz AVR processor with an accessible 8-pin PDIP package. Students can demonstrate GPIO control, timers, interrupts, EEPROM storage, and ISP programming without routing a dense surface-mount footprint. Its 2 KB Flash capacity encourages concise firmware while remaining adequate for introductory embedded systems. Before connecting external modules, verify their supply voltage and signal levels, and configure unused pins safely rather than allowing floating inputs.

What are the key specifications of ATTINY25-20PU that engineers should know?
The ATTINY25-20PU is a 20 MHz, 8-bit AVR microcontroller with 2 KB of Flash, 128 bytes of SRAM, 128 bytes of EEPROM, and six general-purpose I/O lines. According to the Microchip ATtiny25 product page, it also provides 32 working registers and one 8-bit timer/counter with compare modes. The device is packaged as an 8-pin PDIP, making it particularly suitable for compact embedded-control, timing, and simple sensor-interface designs.
Where can I download the ATTINY25-20PU datasheet PDF?
The official ATTINY25-20PU datasheet PDF is available from Microchip Technology at the manufacturer URL listed on this page. The document covers the ATtiny25, ATtiny45, and ATtiny85 family and includes the device pin description, electrical characteristics, memory organization, and application information. Use the official PDF for PCB pin assignments and electrical-limit checks before finalizing a design.
What is the ATTINY25-20PU pinout in the 8-pin PDIP package?
The ATTINY25-20PU uses an 8-pin PDIP arrangement with VCC on pin 8, ground on pin 3, PB0 through PB3 on pins 7 through 4, and PC4 and PC5 on pins 2 and 1. According to the manufacturer datasheet, PB3 supports the RESET input and PC5 is the RESET input on this device family. Verify signal multiplexing against the pin-description table before assigning a peripheral function.
How is the ATTINY25-20PU programmed?
The ATTINY25-20PU is programmed through its in-system programming interface, using the ISP pins associated with PB3, PB4, PB5, and PB0. Microchip's ATtiny25 documentation describes the ISP connection for programming and configuration. Keep the ISP interface accessible or provide test pads so firmware can be updated without redesigning the assembly.
What is the difference between ATTINY25-20PU and ATTINY85-20PU?
The ATTINY25-20PU provides 2 KB of Flash, 128 bytes of SRAM, and 128 bytes of EEPROM, while the ATTINY85 provides substantially more memory and a broader peripheral set. Although both devices use an 8-bit AVR architecture and can use similar package options, the ATTINY85-20PU is not a parameter-matched drop-in replacement for a design that relies on the ATtiny25 pin function. Choose ATTINY25-20PU for minimal firmware and control requirements.
What is the best drop-in replacement for ATTINY25-20PU?
The closest same-footprint option identified is ATTINY25-20P, which retains the ATtiny25 resource set, 20 MHz clock class, 2 KB Flash configuration, and 8-pin DIP format while changing the ordering suffix. A suffix-only alternative should still be checked for temperature, lifecycle, and qualification requirements. The cross-reference review found no qualified cross-brand 8-pin DIP device that could be confirmed as a true drop-in replacement.
Can ATTINY25-20P replace ATTINY25-20PU without PCB changes?
ATTINY25-20P can be considered for a footprint-compatible ATtiny25 design because both use the 8-pin DIP format and the same ATtiny25 core resource class. The principal review points are ordering-code temperature interpretation, current lifecycle status, and any qualification requirements attached to the suffix. Preserve the original ISP and reset connections and validate the programmed image before production release.
What can replace an ATTINY25-20PU in a small controller design?
The practical replacement path starts with ATTINY25-20P because it retains the ATtiny25 family and 8-pin DIP footprint. Moving to ATTINY45-20PU or ATTINY85-20PU may preserve the physical 8-pin arrangement, but it changes available Flash, SRAM, and peripheral resources and therefore is not a parameter-matched drop-in choice. Confirm pin multiplexing, memory needs, and firmware behavior before selecting a larger ATtiny member.
Is ATTINY25-20PU suitable for a compact sensor-node design?
The ATTINY25-20PU is suitable for a compact sensor node when the device only needs simple digital sensing, timing, and low-rate control functions. Its six general-purpose I/O lines, 128 bytes of EEPROM, and 20 MHz clock support small embedded workloads. Avoid it when firmware, buffering, serial bandwidth, or simultaneous peripheral requirements exceed the limited ATtiny25 resources.
Where can I buy ATTINY25-20PU online?
Use the Request a Quote form on this page to request ATTINY25-20PU availability, lot information, and a current quotation. The form is the appropriate route for confirming exact suffix, lead time, minimum order quantity, and delivery status. Share the required quantity, grade, target date, and whether a tube or another approved delivery format is needed.
What is the price of ATTINY25-20PU?
The current ATTINY25-20PU quotation is generated through the Request a Quote form on this page. Submit the quantity, delivery target, and packaging requirement to receive a current commercial response. Because distributor stock and commercial terms can change, engineers should obtain the quote for the exact MPN rather than rely on an unconfirmed historical amount.
What is the lead time and stock status of ATTINY25-20PU?
Request current lead time, stock status, and minimum order quantity through the Request a Quote form on this page. State the required ATTINY25-20PU quantity and target production date so the response reflects the appropriate supply channel. The manufacturer product page identifies the ATtiny25 family as a current product, but project-specific allocation should still be confirmed at order placement.
Is ATTINY25-20PU in stock for an industrial control build?
Current availability for ATTINY25-20PU should be confirmed through the Request a Quote form on this page. Include your required quantity, forecast schedule, and acceptable packaging so inventory can be matched to the production plan. For an industrial build, also confirm the exact temperature grade and any application-specific qualification requirements before ordering.
Is ATTINY25-20PU the same as ATTINY25-20SSU?
The ATTINY25-20PU and ATTINY25-20SSU belong to the ATtiny25 family but use different physical packages. ATTINY25-20PU is an 8-pin PDIP device, whereas ATTINY25-20SSU is a surface-mount variant identified by the SSU package code. They are not footprint-identical, so a PCB designed for the PDIP part cannot directly accept the SSU part without layout changes.
What is the best cross-brand equivalent for ATTINY25-20PU?
No cross-brand equivalent could be confirmed as a true drop-in match for the ATTINY25-20PU. A genuine replacement would need an 8-pin DIP footprint, compatible reset and programming pins, compatible I/O voltage levels, and closely matched peripheral resources. The reviewed cross-reference material did not establish those conditions for a competing manufacturer, so validate any proposed substitute electrically and mechanically before using it.

엔지니어링 참조 데이터: ATTINY25-20PU — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ATTINY25-20PU for compact through-hole designs that need a 20 MHz 8-bit AVR controller, six I/O lines, and only 2 KB of Flash. Its 128-byte EEPROM is useful for compact configuration storage, while the PDIP format makes prototyping and manual assembly straightforward. ATTINY25-20P is the closest identified drop-in option because it preserves the ATtiny25 core resources and 8-pin DIP footprint, but the ordering suffix, temperature interpretation, and lifecycle should be confirmed before substitution. ATTINY45-20PU and ATTINY85-20PU provide more memory and peripherals, yet they are not parameter-matched drop-ins for firmware that assumes the ATtiny25's limited resources. For designs requiring more code space, RAM, peripheral channels, or faster development iteration, move to the larger ATtiny family rather than treating it as a transparent replacement.

대체품과의 비교

파라미터 이 제품 ATTINY25-20P
Brand Microchip Technology Microchip Technology
Package 8-pin PDIP 8-pin PDIP
CPU Architecture 8-bit AVR RISC 8-bit AVR RISC
Maximum Clock Frequency 20 MHz 20 MHz
Flash Memory 2 KB 2 KB
SRAM 128 bytes 128 bytes
EEPROM 128 bytes 128 bytes
General-Purpose I/O Lines 6 6
Working Registers 32 32
Timer/Counter 1 x 8-bit timer/counter with compare modes 1 x 8-bit timer/counter with compare modes

주요 차별점

  • Exact core-resource match in an 8-pin DIP footprint (vs ATTINY25-20P)
  • Compact through-hole package for straightforward PCB assembly (vs ATTINY25-20SSU)
  • ISP programmability supports repeat firmware updates (vs ATTINY25-20P)

설계 노트

Place the ATtiny25 power and ground connections directly into the board's main power distribution path, and place the required decoupling capacitor close to pin 8 and pin 3. Keep the ISP signal routes accessible through test pads or a programming header. A resistor or equivalent current-limiting arrangement on the reset path is recommended to prevent unwanted reset input states during power transitions.

Calculate the maximum supply condition for every external load before finalizing the power source. The ATTINY25 operates from a low-voltage CMOS supply, but motor, relay, and LED drivers can create transients that should be absorbed outside the microcontroller supply pins. Use local bulk capacitance near higher-current loads and separate routing for switching currents to prevent controller supply disturbance.

Do not assign functions to pins without checking the ATtiny25 pin-description table, because the six I/O lines share peripheral functions and the reset function affects PB3. Avoid assuming that unused pins may remain floating, and do not rely on the 2 KB Flash limit as a target; compile with enough margin for bootloader, interrupt-vector, and library overhead. Confirm the final memory report for every firmware build.

For designs using ISP, provide connector or test-point access to the programming signals and maintain signal continuity through the production layout. Route clock-dependent or communication-sensitive lines away from switching nodes and relay or motor drive paths. Although the ATTINY25 is a small microcontroller, separating noisy actuator current from logic traces reduces the chance of false interrupts, reset events, or corrupted EEPROM writes.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The ATTINY25-20PU is not an automotive-qualified variant. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the cited product information.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

attiny25 20pu datasheet attiny25 pinout attiny25 datasheet attiny25 price attiny25 vs attiny85 attiny25 20ssu attiny25 programming attiny25 20sur attiny25 20su datasheet ATTINY25-20PU pinout ATTINY25-20PU equivalent ATTINY25-20PU replacement Microchip ATTINY25-20PU ATTINY25-20PU application circuit

관련 부품 & 용어

Microchip Technology ATTINY25-20PU ATTINY25-20P ATTINY25 ATTINY45-20PU ATTINY85-20PU AVR AVR RISC architecture picoPower 8-bit microcontroller RISC-based microcontroller semiconductor in-system programming ISP EEPROM SRAM Flash memory PDIP-8 DIP package through-hole mounting 20 MHz clock general-purpose I/O timer/counter Functional Safety (FuSa)
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기