ATXMEGA32A4U-AU - 32MHz 32KB AVR MCU | Microchip Technology
부품 번호: ATXMEGA32A4U-AU ✓ 활성ATXMEGA32A4U-AU 개요
An 8/16-bit AVR microcontroller is a compact embedded-processing device built around the enhanced AVR RISC architecture. In the broader semiconductor hierarchy, this MCU belongs to the Microcontrollers class, combines a CPU core with memory and peripherals on one package, and supports low-power control applications where deterministic timing, event handling, and flexible serial communication are important. The XMEGA A4U family is positioned between basic 8-bit AVR devices and higher-performance 32-bit microcontrollers.
Key features include read-while-write Flash operation, a dedicated 4 KB boot-code section, internal EEPROM and SRAM, a four-channel DMA controller, and an eight-channel event system. Five flexible 16-bit timer/counter blocks provide compare, capture, and PWM functions, while five USARTs and two Two-Wire Interfaces support factory instrumentation, industrial control, and board-to-board communication. A 16-bit Real Time Counter supports timekeeping, and the integrated analog resources support precision measurement and control.
The XMEGA architecture separates high-speed peripherals from the CPU clock, allowing the event system to route signals without requiring continuous CPU intervention. DMA transfers data between peripherals and SRAM, reducing interrupt overhead during communication or sampling workloads. The programmable multilevel interrupt controller supports responsive event handling, while the bootloader and self-programming Flash provide a practical path for field updates.
Typical uses include industrial data acquisition, compact motor-control systems, instrumentation, communications equipment, and low-power embedded controllers. Its combination of 32 MHz processing, multiple USARTs, PWM-capable timers, and DMA makes it useful where several asynchronous peripherals must operate concurrently. The 1.6 V to 3.6 V supply range also permits integration into systems that distribute regulated 1.8 V or 3.3 V power.
PCB design should preserve the voltage, ground, decoupling, clock, and programming connections shown in the manufacturer pin description. Place decoupling capacitors close to the supply pins, route sensitive analog and clock signals away from fast-switching nodes, and follow the recommended programming interface layout. Because firmware peripherals and package options can differ across XMEGA revisions, verify the exact suffix and errata status before production release.
This product page combines the manufacturer feature set, package information, verified cross-reference findings, and practical design guidance. It also distinguishes a genuine same-footprint option from similarly named devices whose architecture, memory configuration, temperature grade, or function is not electrically interchangeable.
드롭인 대체품: ATXMEGA32A4U-AU — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATXMEGA32A4U-AU (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, EEPROM, SRAM, Event System Channels.
ATXMEGA32A4U-AUR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATXMEGA32A4U-AU 최대 정격 & 전기적 특성
| Product Type | 8/16-bit RISC Flash Microcontroller |
| Architecture | AVR enhanced RISC |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 32 KB Flash (16K x 16) |
| Boot Code Section | 4 KB Flash |
| SRAM | 4 KB |
| EEPROM | 1 KB |
| General-Purpose I/O Lines | 34 |
| DMA Channels | 4 |
| Event System Channels | 8 |
| Timer/Counters | 5 flexible 16-bit timer/counters |
| USART Count | 5 |
| Two-Wire Interface Count | 2 |
| Real Time Counter | 16-bit |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 85 °C |
| 패키지 | 44-pin TQFP, 10 mm x 10 mm |
| 실장 유형 | Surface mount |
| External Bus Interface | 1 interface |
| RoHS 상태 | unknown |
ATXMEGA32A4U-AU 44-pin tqfp, 10 mm x 10 mm 핀 구성 가이드
ATXMEGA32A4U-AU(44-pin tqfp, 10 mm x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA32A4U-AU.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATXMEGA32A4U-AU 적합 용도: 6 애플리케이션s: Industrial Data Acquisition, Industrial Communications Gateway, Precision Timer and Motor Control, Instrumentation and Measurement, Embedded Control with USB Connectivity, Low-Power Embedded Controller.
Industrial Data Acquisition
The ATXMEGA32A4U-AU fits compact data-acquisition equipment that must combine sensor conditioning, timed sampling, and local communications. Its five 16-bit timer/counters support precise sampling intervals, while four DMA channels can move captured data without tying up the AVR core. The eight-channel event system can connect timers, communications, and external signals for deterministic sequencing. Operating from 1.6 V to 3.6 V permits use with 1.8 V and 3.3 V system rails. Place local decoupling at the supply pins and keep analog sensor paths separated from high-speed switching nodes.
추천
Industrial Communications Gateway
The ATXMEGA32A4U-AU is appropriate for gateways that must bridge several serial devices over a constrained embedded platform. Five USARTs provide dedicated paths for sensors, local consoles, and field equipment, while two Two-Wire Interfaces support board-level buses. DMA can service buffered traffic and the event system can trigger transfers on peripheral events, reducing polling overhead. The 32 MHz AVR core remains available for protocol processing and supervision. Firmware should define peripheral priorities, buffering limits, and fault recovery before multiple channels operate simultaneously.
추천
Precision Timer and Motor Control
The ATXMEGA32A4U-AU is well suited to compact motor-control and timing modules that require several independent waveform outputs. Five flexible 16-bit timer/counters provide compare, capture, and PWM functions, and the event system can route timer events to other peripherals for coordinated control. At a maximum clock frequency of 32 MHz, the device can execute control logic alongside time-critical peripheral operations. The design should use isolated gate drivers for power transistors and preserve clean timing paths between the timer outputs and external circuitry.
추천
Instrumentation and Measurement
The ATXMEGA32A4U-AU fits laboratory and field instruments that combine measured signals, timing, displays, and data exchange. The 16-bit timer/counters support elapsed-time measurement and sample-rate generation, while DMA and the event system improve data-flow predictability. Multiple USARTs allow connection to sensors, computers, and service interfaces without relying on software polling for every transfer. Use the manufacturer pin table to assign analog and digital resources, and keep sensitive measurement inputs away from switching regulators and high-current output stages.
추천
Embedded Control with USB Connectivity
The ATXMEGA32A4U-AU can serve as the control processor in compact USB-enabled peripherals, configuration tools, and service interfaces. Its 32 MHz AVR core and 32 KB self-programming Flash provide room for control logic, protocol handling, and a bootloader. The event system and DMA improve responsiveness when data arrives asynchronously, while the multiple USARTs support external sensors and service ports. A USB interface should include the required voltage, data-line, pull, and power-management components specified by the selected USB controller and application architecture.
추천
Low-Power Embedded Controller
The ATXMEGA32A4U-AU can be used in low-power embedded controllers where sleep modes, event-driven operation, and compact local processing are valuable. The 1.6 V minimum operating voltage supports low-voltage system architectures, while the event system allows peripherals to coordinate activity without constant CPU polling. Firmware can disable unused resources, use low-power sleep modes, and wake on selected external or peripheral events. Validate clock-startup behavior, regulator quiescent current, and wakeup timing at the system level rather than relying only on the nominal 32 MHz operating frequency.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATXMEGA32A4U-AU — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATXMEGA32A4U-AUR |
|---|---|---|
| Package | 44-pin TQFP, 10 mm x 10 mm | 44-pin TQFP, 10 mm x 10 mm |
| Brand | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Program Memory | 32 KB Flash (16K x 16) | 32 KB Flash |
| SRAM | 4 KB | 4 KB |
| EEPROM | 1 KB | 1 KB |
| Operating Voltage Range | 1.6 V to 3.6 V | 1.6 V to 3.6 V |
| General-Purpose I/O Lines | 34 | 34 |
| DMA and Event System | 4 DMA channels and 8 event channels | 4 DMA channels and 8 event channels |
| Order Packing | -AU tray-style ordering | -AUR tape-and-reel ordering |
주요 차별점
- Integrated event-driven control subsystem (vs ATXMEGA32A4U-AUR)
- Broad real-time peripheral integration (vs ATXMEGA32A4U-AUR)
- Direct PCB compatibility for reel-to-reel production (vs ATXMEGA32A4U-AU)
설계 노트
Assign the power, ground, programming, clock, reset, and peripheral pins directly from the manufacturer pin-description table. Keep each supply decoupling capacitor physically close to its associated device pin, and provide a low-impedance ground return for high-current switching. Route programming signals away from analog inputs and noisy power-conversion nodes so the bootloader and debugger retain reliable access in production.
Treat the 32 MHz clock path as a signal-integrity-sensitive route and avoid long branches or unnecessary stubs. Follow the manufacturer recommendations for the external clock or internal oscillator configuration selected by the design. Keep communication and timer outputs separated from sensitive analog channels, and use a continuous ground reference beneath the device where board-space and EMC requirements permit.
The listed operating range is 1.6 V to 3.6 V, so verify rail tolerance, startup behavior, and regulator headroom across temperature and load. Because the device combines multiple high-speed peripherals, calculate worst-case supply current for the selected clock and peripheral configuration. Confirm decoupling capacitance and ESR requirements in the official electrical-characteristics section before releasing the power design.
Do not assume that similarly named XMEGA32A4 devices are interchangeable. The ATXMEGA32A4-AU and ATXMEGA32A4U-AU belong to different suffix generations covered by a dedicated migration application note, while an AN or ANR suffix can indicate a different ordering or grade. Confirm the exact device identity, package drawing, temperature range, errata status, and peripheral set before reusing firmware or PCB artwork.
규정 준수 정보
The verified product information identifies a green 1.6 V to 3.6 V industrial-temperature device but does not provide definitive RoHS, REACH, halogen-free, lead-free, or conflict-minerals declarations.