BCM59121B0KMLG - Octal 802.3bt PoE PSE Controller | Broadcom
부품 번호: BCM59121B0KMLG ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $13.5 | $13.50 |
| 10 | $12.4 | $124.00 |
| 100 | $11.2 | $1,120.00 |
| 500 | $10.1 | $5,050.00 |
| 1,000 | $9.3 | $9,300.00 |
BCM59121B0KMLG 개요
A PSE controller is a category of power management IC that resides in network switches or midspan hubs and is responsible for detecting, classifying, and powering Powered Devices (PDs) over Ethernet cabling. Within the broader hierarchy, a PSE controller is a specialized Power-over-Ethernet IC, itself a subcategory of Power Management IC, which in turn falls under the broader umbrella of Power Management. The BCM5912X family specifically targets high-port-count enterprise and industrial switches that must comply with the latest IEEE 802.3bt standard.
Key features include 8 independent PSE channels, 0.2 ohm integrated MOSFETs, 802.3af/at/bt support, I2C/SPI management interface, and per-port current/voltage monitoring. The BCM59121B0KMLG supports legacy 2-pair and modern 4-pair powering modes, including Type-3 (60 W) and Type-4 (90 W) operation, with proprietary current-sense topology eliminating the need for external sense resistors. The 56-QFN package combines power-stage thermal performance with a compact 8x8 mm footprint suitable for high-density switch designs.
Architecturally, the device uses Broadcom's lossless internal current-sense method together with an embedded MCU to handle detection, classification, power-good timing, and fault recovery in hardware. This removes external FET drivers and sense resistors, reducing BOM and PCB area, while the on-die microcontroller provides port telemetry to the host switch CPU.
Typical applications include enterprise managed switches, industrial Ethernet switches, IP surveillance NVRs, wireless LAN controllers with PoE uplinks, and any multi-port PSE system requiring IEEE 802.3bt compliance. The 4-pair Type-4 support makes it well-suited for powering high-demand devices such as PTZ cameras, Wi-Fi 6/6E/7 access points, and industrial lighting controllers.
When designing with the BCM59121B0KMLG, allocate adequate copper area beneath the exposed pad for thermal dissipation. Designers should follow the BCM5912X hardware reference design and use Broadcom's evaluation kit firmware for code development.
드롭인 대체품: BCM59121B0KMLG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
BCM59111B0KMLG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
BCM59101B0KMLG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
BCM59121B0KMLG 최대 정격 & 전기적 특성
| Product Type | PoE PSE Controller (Power Sourcing Equipment) |
| Standard Compliance | IEEE 802.3af / 802.3at / 802.3bt |
| Number of Channels | 8 |
| Integrated MOSFET RDS(on) | 0.2 ohm |
| Powering Modes | 2-pair and 4-pair |
| Current Sense Method | Proprietary lossless internal current sense |
| Integrated Microcontroller | Yes (onboard MCU for autonomous port management) |
| Management Interface | I2C / SPI (per datasheet) |
| 패키지 | 56-QFN (8x8 mm) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant (per DigiKey listing) |
| External FET Required | No (FETs integrated) |
| External Sense Resistor Required | No (lossless internal sense) |
BCM59121B0KMLG 56-qfn (8x8 mm) 핀 구성 가이드
BCM59121B0KMLG(56-qfn (8x8 mm) 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: BCM59121B0KMLG.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
BCM59121B0KMLG 적합 용도: 7 애플리케이션s: Enterprise Managed PoE Switches, Industrial Ethernet Switches, Wireless LAN Access Point Power Injectors / Midspans, IP Surveillance NVR / PTZ Camera Systems, Smart Building PoE Lighting Controllers, Digital Signage and Kiosk Power Distribution, PoE-Powered IoT Gateways.
Enterprise Managed PoE Switches
The BCM59121B0KMLG powers 8 PoE/PoE+/PoE++ ports per device in 24- or 48-port enterprise managed switches, with IEEE 802.3bt Type-3 (60 W) and Type-4 (90 W) compliance for high-demand endpoints. Its 0.2 ohm integrated FETs and lossless internal current-sense path eliminate external sense resistors, reducing per-port analog footprint. The I2C/SPI host interface lets the switch CPU poll per-port telemetry in real time.
추천
Industrial Ethernet Switches
Industrial DIN-rail and rack-mount Ethernet switches use the BCM59121B0KMLG to deliver 8 PoE++ channels per chip in factory-floor and outdoor cabinets. Its integrated 0.2 ohm FETs and onboard MCU handle autonomous fault recovery, critical when powering industrial sensors and controllers. The 56-QFN (8x8 mm) exposed pad provides the thermal headroom required for sustained 90 W output across multiple ports simultaneously.
추천
Wireless LAN Access Point Power Injectors / Midspans
Midspans and PoE injectors for Wi-Fi 6/6E/7 deployments rely on the BCM59121B0KMLG to provide 802.3bt Type-4 (90 W) power required by tri-radio high-density APs. The lossless current-sense topology allows precise per-port power budgeting across multiple AP loads. Its 4-pair powering capability doubles the deliverable power versus legacy 2-pair PoE+ midspans.
추천
IP Surveillance NVR / PTZ Camera Systems
PTZ cameras with heaters and IR illuminators can draw 60-90 W, beyond what legacy PoE+ provides. The BCM59121B0KMLG enables NVR-side PoE++ ports with 4-pair Type-4 sourcing, eliminating separate power runs. Integrated per-port current monitoring helps the NVR detect cable degradation before camera dropouts occur.
추천
Smart Building PoE Lighting Controllers
PoE-powered LED lighting systems use the BCM59121B0KMLG to deliver 8 individually-controlled PoE++ channels per chip in lighting gateways. The lossless current sense and onboard MCU support per-fixture dimming telemetry without external analog front-ends. 4-pair powering supports high-bay industrial fixtures that exceed PoE+ (30 W) limits.
추천
Digital Signage and Kiosk Power Distribution
Outdoor digital signage kiosks with heaters, bright displays, and 5G modems can require 60-90 W per endpoint. The BCM59121B0KMLG integrates PoE++ sourcing into kiosk backbone switches, eliminating AC mains at each sign. The onboard microcontroller provides autonomous power-cycling for unattended remote reboot scenarios.
추천
PoE-Powered IoT Gateways
Industrial IoT aggregation gateways with multiple downstream PoE sensors can use the BCM59121B0KMLG to provide a small but high-power PoE++ hub. The integrated FETs and lossless sense keep the gateway PCB compact, while the onboard MCU handles independent port state machines even if the host CPU is busy.
추천
추천 제품 요약
엔지니어링 참조 데이터: BCM59121B0KMLG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | BCM59111B0KMLG | BCM59101B0KMLG |
|---|---|---|---|
| Package | 56-QFN (8x8 mm) | 56-QFN (8x8 mm) - same | 56-QFN (8x8 mm) - same |
| Brand | Broadcom | Broadcom | Broadcom |
| PoE Standard Support | 802.3af / at / bt (Type-3 / Type-4) | 802.3af / at only | 802.3af / at, 2-pair only |
| Number of Channels | 8 | 8 | 8 |
| 4-Pair Powering Support | Yes (Type-4 90 W) | No (2-pair only) | No (2-pair only) |
| Current Sense Method | Lossless internal sense | Lossless internal sense | Lossless internal sense |
| Onboard MCU | Yes | Yes | Yes |
| Management Interface | I2C / SPI | I2C / SPI | I2C / SPI |
주요 차별점
- Only BCM5912X family member with full IEEE 802.3bt Type-4 (90 W) 4-pair support (vs BCM59111B0KMLG)
- Onboard MCU reduces host CPU load for port management (vs BCM59101B0KMLG)
- Lossless internal current sense eliminates external sense resistors (vs Industry-standard PSE controllers with external sense)
설계 노트
The BCM59121B0KMLG integrates eight 0.2 ohm high-voltage FETs; under 802.3bt Type-4 (90 W) full-load across all 8 ports, FET dissipation rises quickly. Estimated: at 0.5 A per channel with Vport 50 V, per-FET conduction loss is approximately 0.05 W, but worst-case cable-fault short events can spike dissipation for tens of milliseconds. The 56-QFN exposed pad MUST be soldered to a contiguous copper pour of at least 1 square inch on top and bottom layers, stitched with 0.3 mm thermal vias, to keep junction temperature within the rated operating range.
Per the Broadcom BCM5912X product brief, the high-current port traces (Vport returns) should be routed as short and wide as possible, with the decoupling capacitors placed within 2 mm of the VPORT pins. Keep I2C/SPI traces away from the port switching nodes to prevent noise coupling into management telemetry. The exposed pad should be the only ground-reference point for the FET heatsink copper to avoid ground-loop offsets in the lossless current-sense path.
Designers often overlook that 802.3bt Type-4 requires 4-pair powering and that legacy PDs may not respond to the new Maintain Power Signature (MPS) signature. The BCM59121B0KMLG supports both 2-pair and 4-pair modes but firmware must correctly handle class-change events to avoid spurious power-downs. Verify the latest Broadcom reference firmware and evaluation kit user guide before declaring the design ready for certification testing.
규정 준수 정보
RoHS and lead-free status per DigiKey product listing. REACH, halogen-free, and conflict-mineral declarations are managed by Broadcom's product-compliance portal and were not in the verified distributor data.
