Silicon Labs

C8051F38C-GQ - 50 MHz 8-Bit USB Flash MCU | Silicon Labs

부품 번호: C8051F38C-GQ ✓ 활성
2.7 V to 5.25 V Vdss 32-LQFP, 7 x 7 mm Package 50 MHz Speed 16 KB flash (16K x 8) Memory
MOQ: 1 |

C8051F38C-GQ 개요

Silicon Labs C8051F38C-GQ is an 8-bit C8051F38x full-speed USB flash microcontroller rated at 50 MHz, equivalent to 48 MIPS, with 16 KB of programmable flash and a 32-LQFP 7 x 7 mm package. It operates from 2.7 V to 5.25 V and integrates a 10-bit analog-to-digital converter capable of 500 ksps. The C8051F38C combines a deterministic 8051-compatible architecture with USB connectivity, flash memory, analog conversion, and integrated communications interfaces for compact embedded-control systems.

A microcontroller is a programmable system-on-chip that executes firmware, reads inputs, controls outputs, and manages communication links. Within the semiconductor hierarchy, the C8051F38C is an 8-bit MCU, a microcontroller integrated circuit, and a member of the broader embedded processor category. Its integrated USB interface and mixed-signal resources can reduce external component count in USB-enabled instrumentation, industrial control, human-interface, and low-cost data-acquisition equipment.

The principal device characteristics include a 50 MHz clock, 48 MIPS instruction throughput, 16 KB of flash, and a 10-bit ADC operating at up to 500 ksps. The C8051F38C variant also provides integrated communication interfaces, while the family architecture is designed for pin and code compatibility with C8051F34x devices in most applications. This compatibility history can simplify migration when an existing design uses the earlier family, although firmware, peripheral, and electrical details must still be reviewed.

The 50 MHz clock provides ample processing headroom for protocol handling, sensor acquisition, control-loop updates, and USB traffic without requiring an external processor. Its 10-bit ADC supports approximately 1,024 discrete input levels, making it appropriate for monitoring analog signals where 8-bit resolution would be insufficient. The 2.7 V to 5.25 V operating range accommodates common embedded supply systems, while the integrated communications peripherals reduce board area and firmware overhead.

Typical uses include USB-connected data loggers, industrial sensing modules, digital control panels, laboratory instruments, and embedded peripheral controllers. In each case, the device can execute control software, sample analog inputs, exchange data over USB, and drive digital interfaces. The 32-LQFP package also offers a conventional leaded footprint that can be inspected visually after assembly and is suitable for prototypes, low-to-medium production volumes, and designs that avoid very fine-pitch packages.

The primary design consideration is firmware and peripheral configuration. Use the C8051F38x pin-description table and electrical characteristics in the manufacturer datasheet to assign every package lead, configure oscillator and clocking options, select decoupling, and validate USB routing. A 10-bit ADC also requires an appropriate reference strategy and calibrated input range to achieve useful accuracy.

This page combines the verified C8051F38C-GQ specifications with package, application, comparison, and design guidance. It also identifies verified same-package alternatives while clearly separating a standard commercial-grade option from the automotive-qualified C8051F38C-GM and its 85 °C maximum operating temperature.

드롭인 대체품: C8051F38C-GQ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: C8051F38C-GQ (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, ADC Resolution, RAM.

Silicon Labs
Product Type: 8-bit Flash Microcontroller
ADC Resolution: 10 bits
RAM: 4.25 KB
비교 대상: C8051F38C-GQ →
Silicon Labs
Product Type: 8-bit Flash USB Microcontroller
Package: 48-pin TQFP (7 x 7 mm)
비교 대상: C8051F38C-GQ →

C8051F38C-GM

✅ 드롭인
📦 32-LQFP (7x7 mm)
Retains 50 MHz, 16 KB flash, and 2.25 kB RAM, but adds AEC-Q100 qualification and extends operation to 85 °C

📋 참조 대체품 (카탈로그에 없음)

C8051F38B-GQ

✅ 드롭인
📦 32-LQFP (7x7 mm)
Same 50 MHz family core and 32-LQFP footprint, but the listed 10-bit ADC feature applies to F380/F381/F382/F383/F38C rather than F38B

📋 참조 대체품 (카탈로그에 없음)

C8051F38C-GQ 최대 정격 & 전기적 특성

Product Type 8-bit USB flash microcontroller
Core Architecture 8051-compatible 8-bit core
최대 클록 주파수 50 MHz
Instruction Throughput 48 MIPS
Program Memory 16 KB flash (16K x 8)
RAM 2.25 kB
ADC Resolution 10 bit
Maximum ADC Sampling Rate 500 ksps
동작 공급 전압 2.7 V to 5.25 V
USB Interface Full-speed USB
패키지 32-LQFP, 7 x 7 mm
실장 유형 Surface mount
Core Instruction Set 8051-compatible
Automotive Qualification Not qualified
RoHS 상태 Compliant

C8051F38C-GQ 32-lqfp, 7 x 7 mm 핀 구성 가이드

C8051F38C-GQ(32-lqfp, 7 x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

C8051F38C-GQ의 32-lqfp, 7 x 7 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: C8051F38C-GQ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

C8051F38C-GQ 적합 용도: 6 애플리케이션s: USB Data Acquisition, Industrial Sensor Interface, USB Control Panel, Digital Control Instrument, Low-Cost USB Peripheral, Analog Monitoring Controller.

🔧

USB Data Acquisition

The C8051F38C-GQ fits USB-connected measurement products because it combines a 50 MHz 8051-compatible core with a 10-bit ADC capable of 500 ksps operation. A sensor signal can be conditioned, sampled, filtered, and transmitted over the full-speed USB interface without requiring a separate USB controller. The 16 KB flash holds operating firmware, while 2.25 kB of RAM supports acquisition buffers and protocol variables. Designers should budget divider settling time, define the ADC reference, and calibrate gain and offset to achieve repeatable measurements.

🏭

Industrial Sensor Interface

For industrial sensing modules, the C8051F38C-GQ can acquire analog inputs and coordinate digital sensors through its integrated communications interfaces. Its 10-bit ADC supports 1,024 signal levels, while the 50 MHz core leaves processing capacity for filtering, diagnostics, and communication handling. The 2.7 V to 5.25 V range supports embedded supply arrangements, although the production design must include input protection, grounding, isolation where required, and calibration strategy. Firmware should also detect out-of-range values and sensor faults rather than relying on the ADC alone.

📱

USB Control Panel

The C8051F38C-GQ is well suited to a compact USB control panel because it runs control firmware at 50 MHz and provides 48 MIPS of throughput for button handling, status logic, and host communication. Full-speed USB supports enumeration and data exchange with a computer, while the flash and RAM provide room for device configuration and working state. A practical implementation should debounce inputs, use stable LED drive methods, and separate analog and digital return paths. The 32-LQFP package provides visible leads for inspection and rework during prototype production.

🖥️

Digital Control Instrument

In a digital control instrument, the C8051F38C-GQ can execute measurement algorithms, drive digital outputs, and provide a USB service interface. The 10-bit ADC is suitable for supervisory control signals, while the 50 MHz core supports responsive task scheduling. Using flash for firmware also allows field-oriented configuration or identification data to remain nonvolatile. Firmware designers should use the linker map to prevent stack growth from exceeding the 2.25 kB RAM allocation and should validate timing with the intended oscillator configuration and peripheral clocking.

🌐

Low-Cost USB Peripheral

The C8051F38C-GQ can consolidate a USB peripheral, local control logic, and analog measurement into one device. This is useful for compact adapters, configuration tools, and embedded service interfaces where board area is limited. Its 16 KB flash accommodates a focused application rather than a large graphical application, and the 50 MHz processing rate is ample for protocol and control work. Board implementation should follow the recommended USB trace geometry and decoupling arrangement, and production software should include USB enumeration handling and robust device resets.

🧩

Analog Monitoring Controller

The C8051F38C-GQ is appropriate for an analog monitoring controller that periodically samples sensor inputs and reports results through USB or another integrated communications interface. The ADC's 10-bit resolution and 500 ksps capability provide a practical balance between measurement resolution, conversion speed, and system complexity. Engineers should choose an ADC reference with suitable stability and accuracy, scale inputs to the full converter range, and include calibration coefficients in flash. Sampling results should be timestamped or sequenced in firmware when multiple channels are measured.

What is the C8051F38C-GQ?
The C8051F38C-GQ is a Silicon Labs 8-bit, full-speed USB flash microcontroller with a 50 MHz 8051-compatible core, 16 KB of flash memory, and a 32-LQFP package. According to the Silicon Labs C8051F38x datasheet, the C8051F38C family includes a 10-bit ADC capable of operation at up to 500 ksps. Its combination of USB, flash, analog conversion, and integrated communications interfaces makes it suitable for embedded control, data acquisition, and USB peripheral equipment.
What is the operating voltage of C8051F38C-GQ?
The C8051F38C-GQ operates from 2.7 V to 5.25 V. This range supports common embedded supply arrangements while allowing the USB and digital peripherals to operate from a single system rail. The manufacturer datasheet should be used to confirm voltage-dependent limits for the clock, ADC, USB interface, and individual I/O pins. Designers should also verify absolute maximum ratings before applying an external supply or hot-plugging the device.
How fast is the C8051F38C-GQ microcontroller?
The C8051F38C-GQ runs at up to 50 MHz and provides 48 MIPS of instruction throughput. The Silicon Labs C8051F38x datasheet identifies the part as an 8051-compatible full-speed USB flash MCU. Its processing capability supports USB protocol handling, analog sampling, digital control, and communications tasks in one integrated device, reducing the need for separate logic in compact embedded systems.
How much flash and RAM does C8051F38C-GQ have?
The C8051F38C-GQ contains 16 KB, or 16K x 8 bits, of flash memory and 2.25 kB of RAM. According to the Silicon Labs C8051F38x datasheet, flash supports programmed firmware and nonvolatile data storage. The available RAM can hold working variables, communication buffers, and acquisition data, although final memory use must be checked against the firmware linker map and application stack requirements.
Where can I download the C8051F38C-GQ datasheet PDF?
The official C8051F38C-GQ datasheet is the C8051F38x Full Speed USB Flash MCU Family Data Sheet from Silicon Labs. The manufacturer PDF is available at https://www.silabs.com/documents/public/data-sheets/C8051F38x.pdf. Use the package pinout, electrical characteristics, clock requirements, ADC section, USB details, and recommended application circuit in that document when completing hardware and firmware design.
Where can I find the C8051F38C-GQ pinout?
The C8051F38C-GQ pinout is found in the package drawing and pin-description table of the Silicon Labs C8051F38x datasheet. The device uses a 32-LQFP 7 x 7 mm package. Assign every physical lead from the manufacturer pin table rather than inferring USB, oscillator, power, ground, or I/O functions from neighboring pins. This prevents routing errors and is particularly important when USB D+ and D- must be placed as a controlled pair.
Can the C8051F38C-GQ replace a C8051F34x device?
Yes, the C8051F38x family is designed as a pin- and code-compatible replacement for the C8051F34x family in most applications, according to the Silicon Labs C8051F38x datasheet. The C8051F38C adds or improves family features such as USB and faster analog conversion, but engineers should still compare oscillator options, memory size, USB requirements, and any changed peripheral behavior before updating production firmware.
What is the best drop-in replacement for C8051F38C-GQ?
The C8051F38C-GM is the closest verified same-package Silicon Labs alternative for applications that can accept automotive qualification and a maximum operating temperature of 85 °C. It retains the 50 MHz 8051 core, 16 KB flash, and 2.25 kB RAM in the same LQFP-32 footprint. For an exact commercial-grade configuration, retain the C8051F38C-GQ because package temperature grade and automotive qualification can change qualification requirements.
Can C8051F38B-GQ replace C8051F38C-GQ?
The C8051F38B-GQ is a verified same-family, same-package option, but it is not a full functional replacement because the listed C8051F38x analog-peripheral specification applies to the C8051F380, F381, F382, F383, and F38C variants rather than the F38B. The C8051F38B-GQ can suit designs that do not need the C8051F38C ADC, while the C8051F38C-GQ remains the appropriate choice for analog-sampling applications.
When should I choose C8051F38C-GQ over C8051F38C-GM?
Choose the C8051F38C-GQ for commercial or industrial designs that need the same 50 MHz core and 16 KB flash but do not require automotive qualification. Choose the C8051F38C-GM when the assembly requires AEC-Q100 qualification or the documented automotive temperature capability up to 85 °C. Both use a 32-LQFP footprint, but qualification and temperature requirements must be evaluated independently of physical pin compatibility.
Is C8051F38C-GQ suitable for USB data acquisition?
Yes, the C8051F38C-GQ is suitable for compact USB data-acquisition equipment because it combines a full-speed USB interface, a 50 MHz core, 16 KB flash, and a 10-bit ADC rated up to 500 ksps. The 10-bit converter provides 1,024 representable codes, which suits many supervisory and instrumentation tasks. Actual signal accuracy also depends on the reference, analog front end, acquisition timing, calibration, and firmware averaging.
What can replace C8051F38C-GQ?
The C8051F38C-GM and C8051F38B-GQ are the verified same-package Silicon Labs options. C8051F38C-GM preserves the 50 MHz core, 16 KB flash, and 2.25 kB RAM while adding AEC-Q100 qualification and operation up to 85 °C. C8051F38B-GQ retains the same family and package but does not carry the C8051F38C ADC feature set. No cross-brand drop-in alternative is recommended without project-specific pin, electrical, and firmware verification.
Is C8051F38C-GQ the same as C8051F38C-GM?
No, the C8051F38C-GQ and C8051F38C-GM are related 32-LQFP devices, but their qualification profiles differ. The GQ is the standard C8051F38C commercial configuration, while the GM is automotive-grade qualified and tested to AEC-Q100 specification with operation up to 85 °C. Both provide the 50 MHz core, 16 KB flash, and 2.25 kB RAM, so the principal distinction is application qualification rather than a change in basic performance.
Where can I buy C8051F38C-GQ and what is its price?
Use the Request a Quote form on this page to obtain the current C8051F38C-GQ price, availability, minimum order quantity, and lead time. The quoted commercial terms should identify the exact C8051F38C-GQ ordering code and the 32-LQFP package. For production planning, confirm lifecycle status, authorized sourcing, and delivery schedule at the time of quotation because component availability and schedule can change.
What are the key specifications of C8051F38C-GQ that engineers should know?
The key C8051F38C-GQ specifications are a 50 MHz 8051-compatible core, 48 MIPS throughput, 16 KB flash, 2.25 kB RAM, a 10-bit ADC up to 500 ksps, and a 2.7 V to 5.25 V operating range. The device also provides full-speed USB and integrated communications interfaces in a 32-LQFP 7 x 7 mm package. These figures define its processing, memory, analog, connectivity, voltage, and footprint capabilities.
How much power does the C8051F38C-GQ consume?
The operating current and power dissipation of the C8051F38C-GQ depend on clock frequency, active peripherals, I/O loading, voltage, and operating mode. The manufacturer C8051F38x datasheet should be consulted for the applicable supply-current tables and DC characteristics. A board-level power estimate must include the MCU, USB transceiver behavior, external pull-ups, regulator losses, and attached peripherals rather than relying on a single operating-current value.

엔지니어링 참조 데이터: C8051F38C-GQ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the C8051F38C-GQ for USB-enabled embedded products that need the 50 MHz core, 16 KB flash, and 10-bit ADC in a 32-LQFP footprint. Select the C8051F38C-GM when the product requires AEC-Q100 qualification or operation up to 85 °C, while retaining the same core, memory, and basic performance. Consider the C8051F38B-GQ only when the design does not use the C8051F38C ADC feature and its peripheral, firmware, and memory configuration has been reviewed. The GQR ordering code should not be treated as a distinct alternative because it represents packaging rather than a different device configuration. For all options, verify pin assignments, USB implementation, oscillator requirements, ADC behavior, and code compatibility before releasing a production design.

대체품과의 비교

파라미터 이 제품 C8051F38C-GM C8051F38B-GQ
Package 32-LQFP (7x7 mm) 32-LQFP (7x7 mm) 32-LQFP (7x7 mm)
Brand Silicon Labs Silicon Labs Silicon Labs
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz
Program Memory 16 KB flash 16 KB flash 16 KB flash
ADC 10-bit, up to 500 ksps 10-bit, up to 500 ksps Not listed for the F38B variant
Automotive Qualification Not qualified AEC-Q100 qualified Not qualified
Operating Supply Voltage 2.7 V to 5.25 V 2.7 V to 5.25 V 2.7 V to 5.25 V

주요 차별점

  • ADC capability distinguishes the C8051F38C from the C8051F38B (vs C8051F38B-GQ)
  • Automotive qualification without a performance change (vs C8051F38C-GM)
  • Full-speed USB integration reduces external controller demand (vs C8051F38B-GQ)

설계 노트

Assign the PCB footprint from the manufacturer package drawing and place the decoupling capacitors next to the appropriate supply pins. Keep the 32-LQFP escape routes short enough to preserve signal integrity, and route the USB differential pair as a controlled pair on the same board layer where practical. Avoid placing test pads or unrelated high-current traces between the USB lines because changes in plane references can impair signal quality.

Design the supply for the complete operating range of 2.7 V to 5.25 V and include margin for USB attach states and connected peripherals. Place bulk and local decoupling according to the manufacturer application guidance, and keep return currents continuous under the device. The MCU's own operating current is not the whole board-load budget; regulator efficiency, USB pull-up current, indicator LEDs, sensors, and external logic must also be included.

Do not treat the C8051F38B-GQ as a feature-for-feature substitute for the C8051F38C-GQ when analog acquisition is required. The listed 10-bit ADC capability applies to the C8051F380, F381, F382, F383, and F38C devices, not the F38B. Review the oscillator, USB, ADC, pin, and memory details before replacing a part, especially when existing firmware relies on C8051F38C-specific peripherals or register behavior.

For analog measurements, establish the converter reference before treating the 500 ksps capability as useful system accuracy. Scale sensor outputs into the ADC input range, account for source impedance and acquisition time, and keep high-current return paths away from the analog input region. Calibration performed in firmware can reduce offset and gain error, but it cannot correct unsuitable reference voltage, clipping, excessive noise, or insufficient settling time.

The principal thermal considerations arise from voltage-regulator loss and the connected load rather than processor self-heating at 50 MHz. Estimate junction temperature from the actual supply voltage, core activity, I/O loading, and board thermal path, then verify it in the assembled enclosure. Keep the LQFP solder joints mechanically sound and avoid adding large thermal masses that could complicate hand rework without a verified thermal benefit.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Qualified
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The C8051F38C-GQ listing identifies RoHS compliance. The C8051F38C-GM is AEC-Q100 qualified and tested, but the standard C8051F38C-GQ is not identified as an automotive-qualified variant.

관련 검색

C8051F38C-GQ C8051F38C-GQ datasheet C8051F38C-GQ datasheet pdf C8051F38C-GQ pinout C8051F38C-GQ schematic C8051F38C-GQ equivalent C8051F38C-GQ replacement C8051F38C-GQ vs C8051F38C-GM C8051F38C-GQ LQFP-32 pinout C8051F38C-GQ USB ADC application C8051F38C-GQ price C8051F38C-GQ stock Silicon Labs C8051F38C-GQ

관련 부품 & 용어

Silicon Labs C8051F38C-GQ C8051F38C-GM C8051F38B-GQ C8051F38x C8051F34x 8051-compatible core 8-bit microcontroller MCU embedded processor system-on-chip full-speed USB USB controller 10-bit ADC 500 ksps 16 KB flash memory 2.25 kB RAM 50 MHz clock 48 MIPS 2.7 V to 5.25 V 32-LQFP LQFP package family surface-mount package data acquisition industrial sensor interface
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기