C8051F505-IM - 50MHz 32KB 8-Bit MCU | Silicon Labs
부품 번호: C8051F505-IM ✓ 활성C8051F505-IM 개요
A mixed-signal microcontroller combines a digital processor core, analog conversion circuitry, memory, and communications peripherals in one device. In the product hierarchy, the C8051F505-IM belongs to the C8051F50x family of 8-bit 8051-compatible MCUs and operates as a semiconductor within embedded control and power-management systems. Integrating analog measurement with digital control reduces component count and simplifies layouts where sensor conditioning, acquisition, and control must share one platform.
The device provides 50 MHz processing, corresponding to 50 MIPS within the C8051F50x family, and includes 32 KB of flash for firmware and 4.25 KB of RAM for working data. A 12-bit ADC supports precision-oriented measurements, while SPI, UART, and I2C interfaces enable connection to sensors, memories, transceivers, and host controllers. The 1.8 V to 5.25 V operating range accommodates both low-voltage and conventional 5 V equipment.
The C8051F50x architecture is designed for embedded applications requiring deterministic control with modest memory requirements. Its 8-bit instruction set and 50 MHz clock provide a practical balance between processing throughput, power consumption, and implementation complexity. Flash-resident firmware supports field-programmable logic, and the mixed-signal integration allows acquisition and control functions to operate without a separate analog processor.
Typical uses include industrial sensor controllers, automotive body and accessory modules, building equipment, communications interfaces, motor-control peripherals, and compact consumer products. The 48-QFN package is particularly useful when board area is constrained but full through-hole access is not required. Its combination of analog conversion, digital memory, and serial interfaces supports standalone measurement and control products.
PCB implementation should account for the exposed thermal pad, adequate high-frequency decoupling at the supply pins, and controlled routing around sensitive analog inputs. The QFN package also requires compatible land geometry and a suitable reflow profile. Firmware development should follow the C8051F50x toolchain and device configuration requirements described in the manufacturer documentation.
This product overview combines the verified C8051F505-IM specifications with family-level compatibility information, practical package guidance, and side-by-side replacement analysis. It helps engineers confirm electrical fit, memory requirements, peripheral compatibility, and PCB reuse before selecting the MCU for a new embedded design.
드롭인 대체품: C8051F505-IM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F505-IM (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC Resolution, Core Architecture, Product Type, RAM Size.
C8051F500-IM
✅ 드롭인가격 문의
데이터시트 보기 →C8051F501-IM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F504-IM
✅ 드롭인가격 문의
데이터시트 보기 →C8051F581-IM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F583-IM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
C8051F505-IM 최대 정격 & 전기적 특성
| Product Type | 8-bit mixed-signal microcontroller |
| Processor Family | C8051F50x 8051-compatible MCU |
| 최대 클록 주파수 | 50 MHz |
| Maximum Processing Rate | 50 MIPS |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| RAM Size | 4.25K x 8 bits |
| Supply Voltage Range | 1.8 V to 5.25 V |
| ADC Resolution | 12 bits |
| Serial Interfaces | SPI, UART, and I2C |
| 패키지 | 48-QFN (7 x 7 mm) |
| Exposed Pad | 1 thermal pad |
| 실장 유형 | Surface mount |
| Product Series | C8051F50x |
| Core Architecture | 8-bit 8051 |
| RoHS 상태 | Compliant |
| Automotive Qualification | Not stated for the -IM suffix |
C8051F505-IM 48-qfn (7 x 7 mm) 핀 구성 가이드
C8051F505-IM(48-qfn (7 x 7 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F505-IM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F505-IM 적합 용도: 6 애플리케이션s: Industrial Sensor Controller, Automotive Body Control Module, Building Equipment Interface, Communications Gateway, Motor and Peripheral Control, Compact Consumer Controller.
Industrial Sensor Controller
The C8051F505-IM fits compact industrial sensor controllers because its 12-bit ADC can acquire process measurements while the 50 MHz 8-bit core handles filtering, calibration, and control logic. Its 32 KB flash provides room for application firmware and 4.25 KB RAM supports working buffers and communication tasks. The 1.8 V to 5.25 V supply range allows use in both low-voltage sensor nodes and 5 V industrial equipment. Place the device in the 48-QFN footprint, connect the analog inputs through the recommended conditioning network, and reserve clean grounding around the exposed pad.
추천
Automotive Body Control Module
The C8051F505-IM can support compact body and accessory control functions where an 8-bit MCU must combine serial communications with analog monitoring. Its 50 MHz clock provides useful throughput for debouncing, state-machine logic, and communication handling, while the 12-bit ADC supports battery or resistive-sensor measurements. The 48-QFN package conserves board area in space-constrained modules. Because the -IM suffix does not itself establish automotive qualification, an automotive-rated ordering variant should be selected when AEC-Q100 qualification is required.
추천
Building Equipment Interface
The C8051F505-IM is appropriate for building-equipment interfaces that monitor inputs and coordinate communications through a compact embedded controller. The 32 KB flash can hold protocol handlers and configuration data, while the 4.25 KB RAM is sufficient for short message buffers and control state. SPI, UART, and I2C interfaces allow connection to sensors, local transceivers, and service ports. Its 1.8 V to 5.25 V range simplifies design across mixed-voltage equipment, although external level translation may still be required between incompatible interfaces.
추천
Communications Gateway
The C8051F505-IM can serve as a small protocol-conversion or gateway controller when the design needs deterministic serial handling without a higher-complexity processor. The 50 MHz clock allows the firmware to service UART, SPI, and I2C activity concurrently, and the 32 KB flash supports stack configuration and protocol tables. Its 48-QFN package is useful where routing density is high. For continuous high-rate traffic, evaluate interrupt latency, DMA availability, buffer requirements, and the maximum supported baud rate against the device documentation.
추천
Motor and Peripheral Control
The C8051F505-IM can coordinate motors, valves, relays, and other peripherals when a compact 8-bit control engine is sufficient. Its 50 MHz clock supports responsive state-machine execution, while the integrated 12-bit ADC can monitor position, current, or resistive feedback. The 1.8 V to 5.25 V supply range permits operation across multiple embedded platforms. Drive loads through properly designed power stages rather than the MCU pins directly, and account for switching transients, ground bounce, thermal conditions, and protective components around inductive outputs.
추천
Compact Consumer Controller
The C8051F505-IM is useful in compact consumer products that require local sensing, serial connectivity, and embedded control in a small board area. Its 32 KB flash and 4.25 KB RAM provide a practical memory balance for appliance controls, access modules, and configuration-oriented products. The 48-QFN 7 x 7 mm package supports dense layouts, while the 1.8 V minimum supply voltage enables operation in modern low-voltage systems. Validate standby consumption, analog accuracy, wake behavior, and production programming requirements for the intended product configuration.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F505-IM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F500-IM | C8051F501-IM | C8051F504-IM | C8051F581-IM | C8051F583-IM |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Product Family | C8051F50x | C8051F50x | C8051F50x | C8051F50x | C8051F58x | C8051F58x |
| Processor Width | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Maximum Clock Frequency | 50 MHz | 50 MHz class | 50 MHz class | 50 MHz class | 50 MHz class | 50 MHz class |
주요 차별점
- Provides a documented 32 KB flash and 4.25 KB RAM configuration for firmware and working data (vs C8051F500-IM)
- Combines a 50 MHz 8-bit core with an integrated 12-bit ADC (vs C8051F581-IM)
- Uses a compact 48-QFN 7 x 7 mm package for space-constrained boards (vs C8051F501-IM)
- Supports a broad 1.8 V to 5.25 V operating range (vs C8051F504-IM)
설계 노트
Implement the 48-QFN footprint directly from the manufacturer package drawing and connect the exposed pad to the intended ground plane. Keep the thermal-via pattern inside the package land area, maintain solder-mask and paste symmetry, and verify that the assembly profile supports the 7 x 7 mm body. The exposed pad should be included in the electrical, thermal, and assembly checks rather than treated as an optional pad.
Place supply bypass capacitors immediately adjacent to the relevant VDD and ground connections, with short and symmetrical return paths. Route analog inputs away from switching nodes, high-current motor paths, and digital clock lines; keep the analog ground reference within the device's recommended layout. Although the device uses a mixed-signal 12-bit ADC, front-end filtering, source-impedance control, and quiet reference routing remain necessary for predictable measurements.
Do not treat every member of the C8051F50x or C8051F58x family as automatically interchangeable. Before substituting a candidate, compare the complete pin-description table, power pins, analog channels, reset behavior, oscillator connections, flash capacity, RAM, peripheral assignments, and boot or configuration options. A shared 48-QFN outline is only the mechanical starting point; firmware and board functionality also depend on device-specific behavior.
Budget the 1.8 V to 5.25 V operating range against startup, transients, and the voltage required by attached peripherals. Use a regulator with suitable transient response for the digital load, and avoid injecting analog and switching currents into the same narrow return path. The MCU's exact operating current under each clock, peripheral, and ADC configuration should be taken from the device datasheet before sizing the power path.
규정 준수 정보
The exact product listing identifies RoHS compliance. The -IM suffix is an industrial-temperature ordering option and does not by itself indicate AEC-Q100 automotive qualification; -AM variants receive additional automotive testing and qualification.