C8051F580-IM - 50MHz 128KB 8-Bit MCU | Silicon Labs
부품 번호: C8051F580-IM ✓ 활성C8051F580-IM 개요
An 8051 microcontroller is a CISC-based embedded-processing component that integrates a processor core, program memory, data memory, digital peripherals, and serial communication interfaces on one semiconductor device. The C8051F58x family combines the established 8051 instruction set with high-speed 50 MHz execution, making it suitable for control systems that require deterministic embedded processing, mixed-signal interfacing, and communication beyond basic GPIO operation.
The C8051F580-IM provides 128 KB of flash for firmware and 8 KB of RAM for working data. Its communication resources include CAN 2.0, LIN 2.1, SPI, two UARTs, and I2C, as identified in the manufacturer and distributor documentation. A 12-bit ADC is also indicated for analog measurement tasks. This combination supports designs that must coordinate sensors, actuators, vehicle networks, and operator interfaces without relying on a collection of separate interface devices.
The C8051F58x device family is available in QFP and QFN packages, with the C8051F580, C8051F581, C8051F584, and C8051F585 devices offered in 48-pin configurations. The -IM orderable variant uses a 48-QFN footprint and supports operation from -40 °C to +125 °C. Its operating-voltage range permits use with 1.8 V, 2.5 V, 3.3 V, and 5 V system rails, although component selection still requires the applicable rail and interface limits to be checked in the final design.
Typical applications include CAN and LIN network nodes, industrial controllers, automotive body and comfort modules, motor-control subsystems, sensor-hub designs, and compact consumer equipment. The combination of 50 MHz processing, 128 KB flash, and multiple serial interfaces is particularly useful when a design needs protocol handling and application firmware in one controller.
PCB design should preserve the exposed-pad land pattern, thermal path, and decoupling requirements of the 48-QFN package. Firmware development must also account for the selected clock, reset method, programming interface, and peripheral resource mapping. Pin assignments and unused-pin treatment should be taken directly from the Silicon Labs pin-description tables before schematic and layout release.
This page consolidates device specifications, family alternatives, package information, interface coverage, and practical implementation guidance. It is intended to support component selection, PCB compatibility review, firmware planning, and sourcing decisions for the C8051F580-IM.
드롭인 대체품: C8051F580-IM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: C8051F580-IM (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package.
C8051F581-IM
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
C8051F584-IM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →C8051F585-IM
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
C8051F580-IM 최대 정격 & 전기적 특성
| Product Type | 8-bit CISC microcontroller |
| Microcontroller Family | C8051F58x |
| 최대 클록 주파수 | 50 MHz |
| Flash Memory | 128 KB |
| RAM | 8 KB |
| Operating Voltage Range | 1.8 V to 5.25 V |
| Supported Supply Levels | 2.5 V, 3.3 V, and 5 V |
| ADC Resolution | 12 bit |
| ADC Channel Count | 40 |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| Serial Interfaces | SPI, 2 UART, and I2C |
| 패키지 | 48-QFN, 7 x 7 mm |
| 핀 수 | 48 pins |
| 실장 유형 | Surface mount |
| 동작 온도 범위 | -40 °C to +125 °C |
| RoHS 상태 | Compliant |
| Lead-Free Status | Lead-free |
C8051F580-IM 48-qfn, 7 x 7 mm 핀 구성 가이드
C8051F580-IM(48-qfn, 7 x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: C8051F580-IM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
C8051F580-IM 적합 용도: 6 애플리케이션s: Industrial CAN and LIN Control Node, Automotive Body and Comfort Module, Sensor Hub and Data Acquisition, Motor and Actuator Control, Communication Gateway and Protocol Bridge, Compact Consumer and HMI Controller.
Industrial CAN and LIN Control Node
The C8051F580-IM fits an industrial network node that must process local control logic while communicating over both CAN 2.0 and LIN 2.1. Its 50 MHz C8051 core provides timing headroom for protocol handling, while 128 KB of flash accommodates application firmware, configuration data, and update logic. The 8 KB RAM supports active communication buffers and time-critical state management. Operating from 1.8 V to 5.25 V also allows integration with 3.3 V and 5 V industrial electronics. Place CAN and LIN protection close to the connector, route the interface signals according to the data sheet, and isolate high-energy transients from the MCU and decoupling network.
추천
Automotive Body and Comfort Module
The C8051F580-IM is suitable for body and comfort electronics that coordinate switches, sensors, lamps, and actuators across a CAN or LIN network. Its 128 KB flash provides room for application code in a compact 48-QFN 7 x 7 mm package, while the -40 °C to +125 °C operating range supports temperature-constrained environments. CAN 2.0, LIN 2.1, two UARTs, SPI, and I2C allow peripheral expansion without duplicating communication hardware. For production designs, validate brownout behavior, sleep transitions, watchdog settings, and automotive qualification requirements for the complete assembly, rather than treating the microcontroller temperature rating as the only automotive qualification criterion.
추천
Sensor Hub and Data Acquisition
The C8051F580-IM can consolidate an analog sensor interface, local filtering, and communications in a compact sensor hub. Its 12-bit ADC with 40 channels provides an appropriate starting point for precision-oriented measurement designs, while the 50 MHz processing speed allows control and filtering to run alongside CAN, LIN, SPI, UART, or I2C traffic. The 1.8 V minimum operating voltage supports low-voltage sensor nodes, and the 128 KB flash leaves space for calibration tables and application logic. Keep analog and digital returns separated, reference the analog ground appropriately, and verify ADC acquisition requirements against the electrical characteristics for the selected clock and supply configuration.
추천
Motor and Actuator Control
The C8051F580-IM fits compact actuator controllers where real-time sequencing, communications, and protection logic must coexist. Its 50 MHz C8051 core is suitable for PWM-oriented control, state-machine sequencing, and diagnostics, while CAN 2.0 and LIN 2.1 support command exchange with higher-level vehicle or industrial controllers. The 8 KB RAM provides workspace for timing and control state, and 128 KB flash holds application code and parameter tables. Use the exposed-pad land pattern for thermal dissipation, place input filtering close to signal-entry pins, and validate startup, stall, and fault behavior independently of the MCU's nominal clock specification.
추천
Communication Gateway and Protocol Bridge
The C8051F580-IM is appropriate for a compact protocol bridge because it combines CAN, LIN, SPI, two UARTs, and I2C with a 50 MHz processing core. A gateway can translate between a vehicle or industrial CAN network and a LIN subnetwork while also exposing local configuration through SPI or I2C. The 128 KB flash capacity supports protocol stacks and bridge logic, while the 48-QFN 7 x 7 mm package reduces board area in space-constrained equipment. Validate bus timing, termination, isolation, fault recovery, and firmware scheduling under worst-case message loads before deployment.
추천
Compact Consumer and HMI Controller
The C8051F580-IM can serve as the central controller in a compact user-interface or appliance design that combines local display control, keypad input, communications, and analog measurements. The 50 MHz core provides responsive control, 128 KB flash accommodates display and interface firmware, and the 48-QFN footprint supports dense layouts. SPI and I2C are useful for displays and sensors, while the UART resources can support external modules or service interfaces. The 1.8 V to 5.25 V operating range provides flexibility across mixed-voltage designs. Confirm the pin multiplex requirements, oscillator start-up behavior, and low-power requirements in the final schematic and firmware configuration.
추천
추천 제품 요약
엔지니어링 참조 데이터: C8051F580-IM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | C8051F581-IM | C8051F584-IM | C8051F585-IM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | QFN-48 (7x7 mm) | QFN-48 (7x7 mm) | QFN-48 (7x7 mm) | QFN-48 (7x7 mm) |
| Processor Architecture | 8-bit C8051 CISC | 8-bit C8051 CISC | 8-bit C8051 CISC | 8-bit C8051 CISC |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
주요 차별점
- Combines 128 KB flash with multiple vehicle-network interfaces (vs C8051F500-IM)
- Supports both CAN and LIN in the same controller (vs C8051F581-IM)
- Broad operating envelope for embedded control (vs C8051F584-IM)
설계 노트
Implement the 48-QFN land pattern and exposed-pad connection exactly as shown in the Silicon Labs package drawing. Place supply bypass capacitors close to their designated package pins, provide a low-impedance ground reference, and route sensitive communication or analog signals away from switching nodes. Because the exposed pad is an electrical and thermal connection, its via pattern should satisfy both copper-area and assembly requirements rather than being treated only as a heat sink.
The C8051F580-IM supports a 1.8 V to 5.25 V operating range, but the selected supply must also satisfy the clock, ADC, I/O, and communication-interface limits for the chosen configuration. The Silicon Labs data sheet notes that Port I/O and RST can interface with 5 V logic when VIO is set to 5 V. Verify the actual VIO connection, level-shifting requirements, and reset behavior rather than assuming every peripheral pin tolerates 5 V.
Do not confuse the -IM 48-QFN version with the -IQ 48-TQFP version. Although both are C8051F580 devices with a 50 MHz clock and 128 KB flash, their land patterns are not interchangeable. Before releasing a substitution or cross-reference, compare every pin, the exposed-pad requirement, clock pins, programming signals, reset behavior, and peripheral multiplexing. Firmware should also be tested for startup, watchdog, sleep, and communication recovery behavior.
규정 준수 정보
The Silicon Labs data sheet states that the applicable package options are lead-free and RoHS compliant. AEC-Q100 qualification, REACH status, halogen-free status, and conflict-minerals status are not established by the cited documentation.