CD4543BF - BCD Seven-Segment LCD/LED Driver | Harris
부품 번호: CD4543BF ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.1579 | $1.16 |
| 10 | $1.1579 | $11.58 |
| 100 | $1.1579 | $115.79 |
| 500 | $1.1579 | $578.95 |
| 1,000 | $1.1579 | $1,157.90 |
CD4543BF 개요
A BCD-to-seven-segment decoder is a display-driver subcategory that translates binary-coded decimal information into the seven drive lines used by a numeric display. In the broader electronics hierarchy, the CD4543BF belongs to interface ICs, display drivers, CMOS logic, and digital semiconductors. It sits between a controller or counter and a physical display, allowing a system to present digits without using a microcontroller to generate every segment waveform.
The verified manufacturer information identifies CD4543B as functionally similar to the CD4056B when pin 7 is connected to VSS. The family also provides latch, decoder, blanking, and display-driver functions, but detailed timing, voltage, current, and temperature limits were not included in the supplied search extracts. The 16-lead package and CDIP form factor make the CD4543BF suitable for through-hole industrial, educational, instrumentation, and legacy-control designs where a conventional ceramic dual-in-line package is preferred over a surface-mount package.
Typical uses include seven-segment LCD modules, multiplexed LED displays, digital counters, panel meters, timers, and embedded industrial panels. When driving LCD segments, the display's drive polarity and common-plane arrangement must match the device specifications. When driving LEDs, segment current, duty cycle, and the number of simultaneously lit digits must be checked against the display and supply limits. A decoder is not a regulated power supply or a high-current constant-current LED driver.
The principal design consideration is interface timing. The latch allows the input BCD value to be held while segment outputs are decoded, but the display system must still generate valid strobe and multiplexing signals. Confirm pin assignments, supply voltage range, output drive capability, propagation timing, and electrical limits from the manufacturer datasheet before replacing an existing CD4056B or designing new PCB artwork.
This page synthesizes the verified manufacturer classification, distributor availability, package information, family relationship, and application context for CD4543BF. It deliberately distinguishes documented information from parameters that require confirmation from the full datasheet, helping engineers avoid treating a distributor category label as a complete electrical specification.
드롭인 대체품: CD4543BF — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청CD4543BF 최대 정격 & 전기적 특성
| Product Type | BCD-to-seven-segment latch/decoder/driver |
| Primary Display Application | Liquid-crystal displays |
| Additional Display Capability | LED, incandescent, gas-discharge, and fluorescent displays |
| Logic Family | CMOS |
| 패키지 | 16-CERDIP |
| Number of Leads | 16 leads |
| Input Coding | Binary-coded decimal (BCD) |
| Decoded Outputs | Seven segment outputs a-g and decimal point a |
| Latch Function | Present |
| CD4056B Relationship | Functionally similar when pin 7 is connected to VSS |
| 장착 스타일 | Through-hole ceramic dual-in-line |
| Display Drive Type | LCD and LED display driver |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
CD4543BF 16-cerdip 핀 구성 가이드
CD4543BF(16-cerdip 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4543BF.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4543BF 적합 용도: 6 애플리케이션s: Seven-Segment LCD Counter, Multiplexed LED Display, Digital Timer Panel, Industrial Panel Meter, Educational Logic-Control Trainer, Legacy Instrumentation Display.
Seven-Segment LCD Counter
The CD4543BF suits a counter front panel where a BCD digit must be decoded for a liquid-crystal seven-segment display. Connect the counter's four BCD lines and latch-control signal to the decoder, then route the seven segment outputs and decimal point to the display module. Its CMOS interface and latch function help hold a digit while the display system handles multiplexing. Confirm the LCD common-plane arrangement, supply voltage, and timing from the manufacturer datasheet before finalizing polarity and strobe timing.
추천
Multiplexed LED Display
CD4543BF can participate in a multiplexed LED numeric display because the CD4543B family supports LED applications in addition to LCDs. The BCD digit is decoded into segment outputs and selected according to the display's digit-drive scheme. LED brightness depends on segment current, duty cycle, resistor or current-driver design, and the number of illuminated segments; those values are not supplied in the verified extracts and must be checked before implementation.
추천
Digital Timer Panel
A timer or clock can use CD4543BF to translate a BCD time digit into a visible seven-segment indication. The latch function helps separate input-data changes from the display's update sequence, which is useful when several digits are scanned. Design the interface so BCD input remains valid during the specified latch interval and so display drive polarity matches the LCD or LED module. Verify timing and output limits against the complete CD4543B datasheet.
추천
Industrial Panel Meter
The CD4543BF is suitable for a compact industrial panel meter when the measurement system presents a BCD value and the display uses seven segments. The 16-CERDIP through-hole package is useful for board-level or legacy panel assemblies, while the decoder reduces the number of output lines required from the measurement controller. Check operating temperature, supply voltage, and display-drive current against the actual enclosure and sensor electronics before production.
추천
Educational Logic-Control Trainer
CD4543BF can simplify a digital-logic trainer by displaying a BCD digit without requiring a microcontroller to drive every segment line. It is useful in counters, sequencing demonstrations, and latch experiments because the decoded output makes the relationship between BCD input and visible segments easy to inspect. The through-hole 16-CERDIP package is convenient for prototyping, although the exact pinout and supply limits should be taken from the datasheet.
추천
Legacy Instrumentation Display
CD4543BF fits legacy instrumentation that retains a conventional 16-lead ceramic dual-in-line footprint and needs BCD-to-seven-segment decoding. The decoder can sit between a counter or control latch and a numeric display, preserving a straightforward through-hole construction. For an existing design, compare pin 7 treatment, display polarity, supply voltage, and timing with the original device. For a new design, verify lifecycle availability and long-term sourcing before committing the footprint.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4543BF — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 16-CERDIP |
| Brand | Harris Corporation |
| Device Type | BCD-to-seven-segment latch/decoder/driver |
| Primary Display Application | Liquid-crystal displays |
| Additional Display Support | LED, incandescent, gas-discharge, and fluorescent displays |
| Logic Family | CMOS |
| BCD Input | Supported |
| Latch Function | Supported |
| CD4056B Compatibility | Functionally similar when pin 7 is connected to VSS |
| Verified Price | $1.1579 starting price as of 2026-10-23 |
주요 차별점
- Broad display-technology support (vs CD4056B)
- Through-hole ceramic package (vs CD4543BPWR)
- Legacy family continuity (vs CD4543BMT)
설계 노트
Use the manufacturer package drawing rather than a generic 16-pin symbol when laying out the CD4543BF PCB footprint. The CD4543BF is identified as a 16-CERDIP part, so lead spacing, ceramic-package body dimensions, and through-hole drill geometry must match that package. Confirm pin 1 orientation and the exact pin functions from the CD4543B datasheet before routing BCD inputs and display outputs.
Treat the BCD input and latch-control traces as a defined digital interface. Keep display segment traces away from sensitive analog or switching nodes, provide a stable local return path, and avoid routing segment lines through areas with high crosstalk. Because the supplied data does not include propagation-delay or latch-strobe limits, calculate interface timing from the full manufacturer datasheet rather than assuming timing from the CD4056B.
Determine the display load and supply current from the selected LCD or LED module before choosing the supply rail. The CD4543BF is a logic/display decoder, not a regulated LED constant-current driver. For LED segments, use appropriate current limiting and verify peak and average current under the maximum digit pattern; for LCD segments, verify common-plane polarity and the device's permitted drive configuration.
규정 준수 정보
The supplied search results do not provide verified RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statements. AEC-Q100 is marked not_applicable because the supplied data identifies an industrial/display-driver function and does not identify an automotive-qualified variant.
