CS42L52-CNZ - 24-bit Low-Power Stereo CODEC | Cirrus Logic
부품 번호: CS42L52-CNZ ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $7.42 | $7.42 |
| 10 | $6.65 | $66.50 |
| 100 | $5.88 | $588.00 |
| 500 | $5.21 | $2,605.00 |
| 1,000 | $4.62 | $4,620.00 |
CS42L52-CNZ 개요
What is an audio CODEC? An audio CODEC (coder-decoder) is a mixed-signal IC that converts analog audio signals to digital (ADC path) and digital audio streams back to analog (DAC path), providing the bridge between microphones/speakers and a digital signal processor or application processor. Low-power CODECs sit in the broader power-management IC family and target portable, battery-powered audio applications where quiescent current, dynamic range, and integration directly impact playback time and listening quality.
The CS42L52 integrates a flexible stereo analog input architecture with a 4:1 input mux, two headphone amplifiers capable of 44 mW per channel into 32 ohm loads, and a high-efficiency Class D speaker amplifier. Power consumption is 13 mW at 1.8 V in playback mode. The serial audio interface accepts standard I2S, left-justified, and right-justified formats. An on-chip PLL derives the internal audio clocks from a range of reference frequencies, simplifying system clocking.
Typical applications include portable media players, smartphones, tablets, USB audio headsets, portable gaming devices, voice recorders, and Bluetooth/wireless audio docking stations. The CS42L52 suits any battery-powered stereo audio product where board area and power consumption are tightly constrained but high dynamic range and headphone or speaker drive capability cannot be compromised.
When designing with this part, route analog inputs and outputs symmetrically, place decoupling capacitors close to each supply pin, and connect the exposed pad to a low-impedance ground plane for thermal dissipation and noise rejection. Per the CS42L52 datasheet, careful ground partitioning between analog and digital domains is required to achieve the rated 98 dB dynamic range.
This page synthesizes Cirrus Logic datasheet specifications, real distributor pricing, verified drop-in alternatives, and practical application guidance not present on standalone component distributor pages.
드롭인 대체품: CS42L52-CNZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CS42L52-CNZ (동일 폼 팩터 및 풋프린트) — 차이점: Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
CS42L51-CNZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CS4207-DNZ
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CS42L52-CNZR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AK4621EF
✅ 드롭인✓ 재고 있음
$4.25 / 개
데이터시트 보기 →CS42L52-CWNR
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CS42L52-CNZ 최대 정격 & 전기적 특성
| Product Type | Low-power Stereo Audio CODEC |
| 분해능 | 24-bit |
| 채널 수 | Stereo (2-ch ADC, 2-ch DAC) |
| Dynamic Range (A-weighted) | 98 dB |
| THD+N | -88 dB |
| Headphone Output Power | 44 mW per channel into 32 ohm |
| Class D Speaker Output Power | 1 W per channel |
| 공급 전압 | 1.8 V to 3.3 V (single supply) |
| Playback Power Consumption | 13 mW at 1.8 V |
| Analog Input Architecture | Flexible stereo, 4:1 input mux |
| Sample Rate Range | 8 kHz to 96 kHz |
| Serial Audio Interface | I2S, Left-Justified, Right-Justified |
| 패키지 | 40-QFN-EP (6x6 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +85C |
CS42L52-CNZ 40-qfn-ep (6x6 mm) 핀 구성 가이드
CS42L52-CNZ(40-qfn-ep (6x6 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CS42L52-CNZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CS42L52-CNZ 적합 용도: 6 애플리케이션s: Portable Media Players, USB Audio Headsets, Tablet Computers, Portable Gaming Devices, Bluetooth/Wireless Audio Docks, Voice Recorders and Dictation Devices.
Portable Media Players
The CS42L52-CNZ is purpose-built for portable media players (PMPs) where 98 dB dynamic range and 1 W per channel Class D speaker output matter on battery power. The 13 mW playback consumption at 1.8 V extends battery life versus discrete audio chains, and the 6x6 mm QFN-EP package fits inside slim PMP form factors. The headphone amp drives 32 ohm earphones directly without external buffer. The 4:1 analog input mux allows line-in, microphone, and FM-radio sources to share a single ADC path. For PMP designs, the chip pairs naturally with a host application processor over I2S and can coexist with a CP2102N USB bridge for file transfer.
추천
USB Audio Headsets
USB audio headsets benefit from the CS42L52-CNZ integration of stereo ADC, stereo DAC, headphone amplifier, and microphone preamp on a single chip. The I2S interface links to a USB audio bridge such as CP2102N-A02-GQFN28, while the 44 mW per channel headphone output drives 32 ohm earphones comfortably. Per the Cirrus Logic datasheet, the 8 kHz to 96 kHz sample rate range supports full-bandwidth 48 kHz USB audio. The 1.8 V single-supply operation simplifies power tree design and extends talk time on Li-ion batteries.
추천
Tablet Computers
Tablet computers require stereo audio playback with both headphone and loudspeaker drive, and the CS42L52-CNZ covers both paths with integrated amplifiers. The 1 W per channel Class D output drives tablet loudspeakers efficiently, and the 44 mW headphone amp drives earphones without external buffer. The 40-QFN-EP (6x6) footprint fits in the dense tablet PCB, and the I2S interface connects to the application processor audio port. Per the Cirrus Logic datasheet, the 98 dB dynamic range supports Hi-Fi music playback.
추천
Portable Gaming Devices
Portable gaming consoles need low-latency, low-power stereo audio with headphone output for late-night play, and the CS42L52-CNZ delivers both from a 1.8 V supply. The integrated Class D amplifier drives small game-console speakers at 1 W per channel, and the headphone amp supports gaming headsets. Per the Cirrus Logic datasheet, the I2S serial interface supports standard audio sample rates used by portable gaming platforms. The 6x6 mm QFN-EP package fits within compact handheld enclosures.
추천
Bluetooth/Wireless Audio Docks
Bluetooth and wireless audio docks need a high-quality stereo DAC with both line-driver and headphone outputs, and the CS42L52-CNZ provides this on a single chip. The 98 dB dynamic range preserves audio quality through the DAC-to-speaker chain, and the 1 W per channel Class D output drives dock speakers. The I2S interface accepts digital audio from a Bluetooth SoC, and the 4:1 analog input mux supports auxiliary line-in sources. The 6x6 mm QFN-EP package is well-suited for compact dock enclosures.
추천
Voice Recorders and Dictation Devices
Voice recorders and dictation devices benefit from the CS42L52-CNZ integrated stereo ADC with 4:1 analog input mux, allowing microphone, line-in, and reference inputs to share one chip. The 98 dB dynamic range (A-weighted) preserves voice clarity for transcription and playback. Per the Cirrus Logic datasheet, the 13 mW playback consumption extends battery life for portable recorders. The I2S interface streams to a host MCU or DSP for audio encoding, and the 6x6 mm QFN-EP package fits handheld enclosures.
추천
추천 제품 요약
엔지니어링 참조 데이터: CS42L52-CNZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CS42L51-CNZ | CS4207-DNZ | CS42L52-CNZR | AK4621EF | CS42L52-CWNR |
|---|---|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | AKM (Asahi Kasei Microsystems) | Cirrus Logic |
| Package | 40-QFN-EP (6x6 mm) | 40-QFN-EP (6x6 mm) - same | 40-QFN-EP - same | 40-QFN-EP (6x6 mm) - same | 40-QFN-EP - same | 40-QFN-EP (6x6 mm) - same |
| Resolution | 24-bit | 24-bit | 24-bit | 24-bit | 24-bit | 24-bit |
주요 차별점
- Integrated headphone amp and Class D speaker amp on one die (vs CS42L51-CNZ)
- Single 1.8 V to 3.3 V supply operation simplifies power tree (vs AK4621EF (AKM))
- 98 dB dynamic range exceeds typical portable audio CODECs (vs CS4207-DNZ)
설계 노트
Solder the CS42L52-CNZ exposed thermal pad to a low-impedance ground plane with multiple thermal vias for heat spreading. The exposed pad is the primary thermal dissipation path for the Class D amplifier - without proper soldering, junction temperature may rise during sustained Class D playback. Use a 0.1 uF decoupling capacitor close to each analog supply pin and a 10 uF bulk capacitor on the main supply rail. Keep analog input and output traces short and symmetric to minimize distortion.
Per the Cirrus Logic datasheet, partition the PCB ground plane into analog and digital domains to achieve the rated 98 dB dynamic range. Place the CS42L52-CNZ at the boundary between the analog and digital sections with the exposed pad bridging both grounds at a single point. Route the I2S data, bit clock, and word clock traces together with matched lengths to avoid timing skew. Keep the microphone bias trace short and routed away from switching power and Class D output traces to prevent noise coupling into the microphone ADC path.
The CS42L52-CNZ operates from a single 1.8 V to 3.3 V supply; for portable battery applications, derive this rail from a low-ripple LDO rather than directly from a switching DC-DC converter to avoid audible noise injection into the audio path. The Class D amplifier can draw up to 1 W per channel from the supply during peak playback - verify the upstream regulator or battery can source this peak current without voltage droop. Add bulk capacitance at the IC supply pin to handle Class D inrush.
규정 준수 정보
RoHS compliant per Cirrus Logic product page; not AEC-Q100 qualified - consumer/industrial audio only; halogen-free status not explicitly confirmed in verified data.
