CS4340-CZZ - 24-Bit 96 kHz Stereo DAC | Cirrus Logic
부품 번호: CS4340-CZZ ✗ 단종CS4340-CZZ 개요
A stereo DAC is an interface component that reconstructs analog voltage signals from digital audio samples. Within the signal-chain hierarchy, the CS4340-CZZ belongs to the DAC family, a member of converter ICs and semiconductor devices used to bridge digital signal-processing systems and analog output stages. Its architecture combines digital interpolation, a fourth-order delta-sigma DAC, digital de-emphasis, and switched-capacitor analog filtering.
Key features include 24-bit resolution, a maximum sample rate of 96 kHz, two audio channels, and an SPI-compatible digital interface. The 101 dB signal-to-noise ratio supports low-noise stereo playback, while the integrated de-emphasis and analog filtering reduce the external signal-conditioning burden. The device operates from 2.7 V to 3.6 V and also supports a 5 V analog supply according to the manufacturer datasheet.
The fourth-order delta-sigma architecture emphasizes high resolution and audio-band signal integrity. Digital interpolation reconstructs intermediate samples before conversion, and the switched-capacitor output filter removes high-frequency imaging energy. Because this is an audio DAC rather than a power semiconductor, safe-operating-area data is not applicable. The primary design constraints are interface timing, analog supply quality, output routing, and correct bypass-capacitor placement.
Typical applications include CD and DVD audio systems, digital audio receivers, multimedia PCs, set-top boxes, portable docking equipment, and general-purpose stereo sound modules. In each application, the CS4340-CZZ can translate incoming PCM audio data into balanced or unbalanced analog signals suitable for a headphone amplifier, line-level amplifier, or power amplifier.
For PCB implementation, keep digital and analog return paths separated, place the required bypass capacitors close to their supply pins, and route the analog outputs away from high-current switching nodes. The TSSOP-16 package supports compact surface-mount layouts, but exposed thermal performance is less critical here than regulator and interface-signal integrity. Confirm all voltage, timing, and filtering values against the manufacturer datasheet before release.
This product page organizes the key electrical characteristics, package information, sourcing path, engineering trade-offs, and application guidance for the CS4340-CZZ. It also identifies same-footprint family options for engineers who need higher sample rates or greater word resolution while retaining the 16-pin TSSOP implementation.
드롭인 대체품: CS4340-CZZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CS4340-CZZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Maximum Sampling Rate, Analog Output Filtering, Converter Type, Digital Audio Interface.
CS4341-CZZ
✅ 드롭인가격 문의
데이터시트 보기 →CS4344-CZZ
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →CS4345-CZZ
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →CS4346-CZZ
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →CS4341-CZ
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
CS4340-CZZ 최대 정격 & 전기적 특성
| Product Type | Stereo audio digital-to-analog converter |
| 분해능 | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of Audio Channels | 2 channels |
| Signal-to-Noise Ratio | 101 dB |
| Digital Interface | SPI |
| Architecture | Fourth-order delta-sigma DAC |
| Digital Interpolation | Integrated |
| Digital De-emphasis | Integrated |
| Analog Output Filtering | Integrated switched-capacitor filter |
| Core Supply Voltage Range | 2.7 V to 3.6 V |
| Analog Supply Voltage | 5 V |
| 동작 온도 범위 | -10 °C to +70 °C |
| 패키지 | 16-pin TSSOP, 4.4 mm body width |
| 실장 유형 | Surface mount |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| 수명 주기 상태 | Obsolete |
CS4340-CZZ 16-pin tssop, 4.4 mm body width 핀 구성 가이드
CS4340-CZZ(16-pin tssop, 4.4 mm body width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CS4340-CZZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CS4340-CZZ 적합 용도: 6 애플리케이션s: CD and DVD Audio Players, Digital Audio Receivers, Multimedia PC Sound Cards, Set-Top Boxes and Streaming Media, Portable Audio Docking Systems, General-Purpose Stereo Audio Modules.
CD and DVD Audio Players
The Cirrus Logic CS4340-CZZ fits digital audio players that decode PCM streams into two analog channels. Its 24-bit resolution, 96 kHz maximum sample rate, and integrated digital de-emphasis align with the signal requirements of conventional CD and DVD audio playback. The device accepts serial audio through its SPI interface and reconstructs left and right outputs with a fourth-order delta-sigma converter and switched-capacitor filtering. This integration reduces the number of separate reconstruction and filter blocks. The 16-pin TSSOP package also fits compact consumer-player boards, provided that clock timing, bypass placement, and analog grounding follow the manufacturer application circuit.
추천
Digital Audio Receivers
The CS4340-CZZ can provide the final stereo conversion stage in a digital audio receiver or home-theater audio module. Its 101 dB signal-to-noise ratio is useful when preserving quiet passages before the output is amplified, while the 24-bit format and 96 kHz ceiling cover conventional consumer-audio streams. Digital de-emphasis and switched-capacitor analog filtering are integrated into the converter, reducing external discrete circuitry. A receiver implementation should keep the SPI clock and data routes away from the analog outputs and should provide local decoupling for both the 2.7 V to 3.6 V core supply and the 5 V analog supply.
추천
Multimedia PC Sound Cards
The CS4340-CZZ is suitable for compact multimedia sound-card and docking designs that require stereo digital-to-analog conversion. Its SPI interface permits connection to a digital-audio controller, and the integrated interpolation, delta-sigma conversion, de-emphasis, and analog filtering create a complete stereo output path. At 24-bit resolution and 96 kHz, the converter covers standard high-resolution audio streams while occupying only a 16-pin TSSOP footprint. The key PC-board concern is isolation from switching regulators and digital processors: place bypass capacitors close to the device, keep analog outputs away from high-current paths, and use a continuous ground plane with controlled return currents.
추천
Set-Top Boxes and Streaming Media
The Cirrus Logic CS4340-CZZ can serve as the stereo output converter in set-top boxes, streaming media terminals, and television audio modules. Its two-channel architecture matches the left and right outputs required by many consumer media designs, and the 96 kHz sample-rate ceiling accommodates standard digital-audio streams. Integrating digital de-emphasis and analog output filtering reduces the external component count on space-constrained boards. Design the 16-pin TSSOP footprint with stable analog supply routing, short output paths, and controlled clock distribution. Verify the precise digital format and timing requirements against the decoder or audio processor used in the selected platform.
추천
Portable Audio Docking Systems
The CS4340-CZZ can support portable-audio docking systems that combine a digital source with line-level and headphone amplification. Its low 24-bit, 96 kHz operating profile covers many compressed and lossless audio streams, while the integrated switched-capacitor filter simplifies the analog output network. The TSSOP-16 package permits a compact surface-mount implementation, and the device supports separate core and analog supply arrangements. In a portable design, verify that the converter's -10 °C to +70 °C operating range covers the product environment. Control ground bounce, avoid routing outputs beside switching-regulator components, and apply the manufacturer's bypass recommendations directly to each supply pin.
추천
General-Purpose Stereo Audio Modules
The CS4340-CZZ is appropriate for modular stereo audio subsystems that receive serial PCM data and provide analog line outputs. Its integrated digital interpolation, fourth-order delta-sigma DAC, de-emphasis, and switched-capacitor filtering create a consistent output stage without a separate reconstruction filter chain. The 101 dB signal-to-noise specification provides a useful baseline for quiet-signal reproduction, and the two-channel output supports conventional stereo routing. Module designers should define clock and reset behavior in the host controller, preserve the recommended SPI signal levels, and isolate analog outputs from digital clocks. A complete footprint review is required before substituting a higher-rate family member.
추천
추천 제품 요약
엔지니어링 참조 데이터: CS4340-CZZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CS4341-CZZ | CS4344-CZZ | CS4345-CZZ | CS4346-CZZ | CS4341-CZ |
|---|---|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Maximum Sampling Rate | 96 kHz | 192 kHz | 192 kHz | 192 kHz | 216 kHz | 192 kHz |
| Resolution | 24 bit | 24 bit | 24 bit | 32 bit | 24 bit | 24 bit |
| Audio Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Digital Interface | SPI | SPI | SPI | SPI | SPI | SPI |
주요 차별점
- Matches a conventional 24-bit, 96 kHz stereo-audio requirement (vs CS4346-CZZ)
- Provides a 101 dB signal-to-noise ratio in a compact stereo DAC (vs CS4344-CZZ)
- Uses the established 16-pin TSSOP family footprint (vs CS4345-CZZ)
- Combines interpolation, delta-sigma conversion, de-emphasis, and analog filtering (vs CS4341-CZZ)
설계 노트
Place the required input, output, and supply bypass capacitors directly beside the corresponding CS4340-CZZ pins. Keep the digital audio clock and SPI data routes away from the left and right analog outputs, and provide a continuous ground plane without splitting analog and digital return currents beneath the converter. The 16-pin TSSOP footprint is compact, so routing errors can couple switching or processor noise directly into the stereo outputs.
Decouple the 2.7 V to 3.6 V core supply and the 5 V analog supply independently, following the component values and placement specified by the manufacturer datasheet. Keep switching-regulator and inductor current loops outside the analog-output region. A quiet supply reference alone does not guarantee clean audio; return-current displacement and ground impedance under speaker or headphone-amplifier load can also influence the converter's audible noise floor.
Route the SPI serial data and clock as controlled-impedance digital signals, with continuous reference planes and short stubs avoided. Check setup and hold timing at the host audio controller, especially when the stream approaches the 96 kHz maximum supported rate. A marginal clock or data edge can cause data corruption or jitter that cannot be corrected by the analog output filter, so functional verification should include repeated streaming and worst-case bus activity.
Do not treat a shared TSSOP footprint as sufficient proof of an equivalent device. The CS4340-CZZ is obsolete, and same-family alternatives may support higher sample rates or word lengths, changing clock, format, filtering, and host-controller requirements. Before releasing a substitution, compare pin functions, supply sequencing, reset behavior, digital timing, analog output characteristics, and environmental ratings against the Cirrus Logic manufacturer datasheets.
규정 준수 정보
The CS4340-CZZ is a legacy audio DAC, and no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was found. AEC-Q100 is not applicable to this consumer audio converter based on its stated application class.