CS8420-DSZ Stereo Audio SRC, 2-Channel, 28-SOIC | Cirrus Logic
부품 번호: CS8420-DSZ ✓ 활성CS8420-DSZ 개요
A digital audio sample-rate converter, or SRC, is an interface IC that resamples digital audio data when the source and destination systems operate at different sampling rates. This function is required when clock domains, broadcast standards, computer interfaces, and consumer-audio products do not share a common rate. In the product hierarchy, the CS8420 is a stereo digital-audio SRC, an audio interface IC, an interface integrated circuit, and a semiconductor used within professional and consumer audio signal chains.
The CS8420-DSZ provides separate AES3-type and serial digital-audio inputs, together with corresponding AES3-type and serial digital-audio outputs. AES3-type connections support professional digital-audio equipment, while serial-audio interfaces allow connection to converters, receivers, transmitters, and digital-audio processing logic. Its two-channel architecture is intended for standard stereo audio rather than multichannel surround systems.
Control is provided through a four-wire microcontroller port. According to the Cirrus Logic CS8420 datasheet, channel status and user information can be assembled into block-sized buffers, simplifying read/modify/write operations. This buffered structure is useful when metadata must be inspected, transferred, or updated during audio processing rather than treated as isolated bytes.
Typical applications include professional digital-audio equipment, stereo DAC front ends, digital mixers, broadcast and studio interfaces, computer-audio converters, and asynchronous source-clock adaptation. The converter can also bridge a serial digital-audio source to an AES3-type destination when the two interfaces use different sampling rates. In each case, system clocking, control firmware, and format compatibility must be coordinated to avoid synchronization errors.
When laying out a design, place input and output interface circuitry near the corresponding pins, provide clean reference and clock connections, and verify that the selected digital-audio format matches the converter configuration. The four-wire control bus should be routed away from high-speed audio signals where practical, with firmware prepared for status changes, buffer access, and unsupported-format conditions.
This page combines the CS8420-DSZ product description, a verified 28-SOIC package classification, application guidance, design considerations, and available same-family alternatives. It is intended to help engineers identify whether the device architecture matches the required digital-audio interfaces before beginning schematic or PCB work.
드롭인 대체품: CS8420-DSZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CS8420-DSZ (동일 폼 팩터 및 풋프린트).
CS8420-CSZ
✅ 드롭인가격 문의
데이터시트 보기 →CS8420-DSZ 최대 정격 & 전기적 특성
| Product Type | Stereo digital audio sample-rate converter |
| Manufacturer | Cirrus Logic |
| Manufacturer Part Number | CS8420-DSZ |
| Audio Channel Count | 2 channels |
| Digital Audio Input | AES3-type and serial digital-audio inputs |
| Digital Audio Output | AES3-type and serial digital-audio outputs |
| Control Interface | 4-wire microcontroller port |
| Channel Status Handling | Block-sized buffers |
| User Data Handling | Block-sized buffers |
| 패키지 | 28-pin SOIC |
| 실장 유형 | Surface mount |
| Product Category | Audio Special Purpose |
CS8420-DSZ 28-pin soic 핀 구성 가이드
CS8420-DSZ(28-pin soic 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CS8420-DSZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CS8420-DSZ 적합 용도: 6 애플리케이션s: Professional Digital Audio Interface, Stereo DAC Front End, Broadcast Studio Equipment, Digital Audio Converter Box, Computer Audio Interface, Digital Audio Rack Equipment.
Professional Digital Audio Interface
The CS8420-DSZ fits a professional stereo interface that must accept or deliver AES3-type digital audio while also supporting a serial digital-audio path. Its two-channel SRC architecture provides sample-rate adaptation without requiring the surrounding equipment to operate at the same nominal rate. The four-wire microcontroller port allows a host controller to configure the converter and manage channel-status and user-data buffers. According to the Cirrus Logic CS8420 datasheet, block-sized metadata buffers simplify read/modify/write operations, which is useful when channel information must remain synchronized with the audio stream.
추천
Stereo DAC Front End
The CS8420-DSZ can serve as the sample-rate conversion stage ahead of a stereo DAC when the incoming digital-audio source uses a rate different from the playback domain. Its serial and AES3-type outputs provide flexibility in connecting the converter to digital receivers, transmitters, or codec stages. The two-channel SRC matches conventional left-right stereo playback, while the microcontroller interface enables firmware-controlled configuration and metadata handling. System designers should verify the exact supported-rate combinations and digital-audio voltage levels in the manufacturer datasheet before finalizing the interface.
추천
Broadcast Studio Equipment
A broadcast or studio signal chain often receives digital audio from equipment operating in a different clock domain from the processing system. The CS8420-DSZ addresses this need with a dedicated stereo sample-rate converter, AES3-type connections for professional interfaces, and serial digital-audio I/O for embedded equipment. Its block-based channel-status and user-data handling is particularly useful when non-audio metadata must be passed through or edited without disrupting the sample stream. Firmware should define behavior for unsupported rates, status flags, and buffer overflow conditions.
추천
Digital Audio Converter Box
The CS8420-DSZ is well suited to a standalone digital-audio converter box that bridges professional AES3-type equipment and consumer or computer-oriented serial audio. The converter can provide rate adaptation at the center of the enclosure while the four-wire control port connects to a small microcontroller responsible for startup, rate selection, and status reporting. This arrangement reduces the need to synchronize separate source and destination clock domains. Board design should isolate high-speed digital lines, provide stable references, and include controlled-impedance routing according to the applicable digital-audio interface requirements.
추천
Computer Audio Interface
The CS8420-DSZ can support a computer-audio interface that must reconcile asynchronous digital-audio sources before presenting stereo audio to downstream conversion circuitry. AES3-type inputs are useful when accepting professional digital sources, while serial outputs can feed local codecs or DACs. The dedicated SRC allows the host system to maintain local processing clocks without requiring every connected device to share one rate. Control firmware should coordinate rate changes and expose status information, while the hardware implementation must minimize crosstalk between the serial-audio traces and the four-wire control bus.
추천
Digital Audio Rack Equipment
The CS8420-DSZ is appropriate for rack-mounted digital-audio processing equipment that accepts several external clock and rate environments. Its stereo AES3-type and serial interfaces allow the same SRC function to support multiple interconnection styles, while block-based metadata handling supports repeatable configuration and monitoring workflows. In a rack design, the converter should be placed near the input and output connectors to shorten high-speed traces and maintain predictable return paths. Firmware should implement deterministic startup and fault reporting so that downstream equipment can detect unsupported rates or invalid channel-status conditions.
추천
추천 제품 요약
엔지니어링 참조 데이터: CS8420-DSZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CS8420-CSZ |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 28-SOIC | 28-SOIC class; exact dimensions require manufacturer confirmation |
| Product Type | Stereo digital audio sample-rate converter | CS8420-family stereo digital audio sample-rate converter |
| Channel Count | 2 channels | 2 channels |
| AES3-Type Input | Supported | Supported |
| Serial Digital Audio Input | Supported | Supported |
| AES3-Type Output | Supported | Supported |
| Serial Digital Audio Output | Supported | Supported |
| Control Interface | 4-wire microcontroller port | 4-wire microcontroller port |
| Metadata Buffering | Block-sized channel-status and user-data buffers | Block-sized channel-status and user-data buffers |
주요 차별점
- Supports both AES3-type and serial digital-audio paths in each direction (vs Generic digital-audio interface ICs)
- Block-oriented metadata access (vs CS8416-DNZ)
- Dedicated four-wire microcontroller control (vs Non-programmable audio transceivers)
- Stereo architecture matched to conventional audio paths (vs Multichannel audio codecs)
설계 노트
Route the AES3-type and serial digital-audio nets as continuous, controlled-impedance paths and keep them away from analog inputs and switching-node traces. Provide a continuous reference plane beneath the digital interfaces, use short return connections to the device ground pins, and place any termination or impedance-matching components at the signal source or receiver according to the manufacturer application guidance.
Digital-audio clock, data, and frame signals must be treated as a synchronous interface. Check source-to-destination clock relationships, supported sampling rates, and format polarity before enabling the converter. Keep the four-wire control traces physically separated from high-speed audio nets where practical, and validate timing margins with the actual external source and output loading rather than relying on nominal logic-level assumptions.
Do not assume that two converters with similar descriptions are interchangeable. Confirm the exact ordering suffix, 28-SOIC body dimensions, lead pitch, pin numbering, exposed-pad requirements, supply rails, and control protocol against the manufacturer drawings. For block-based metadata operations, also define firmware behavior for unsupported rates, status-byte errors, and buffer boundaries before bringing up the system.
Treat the four-wire microcontroller interface as a configuration and metadata path rather than a substitute for the high-speed audio connections. Firmware should sequence initialization, detect whether the source and destination rates are supported, and report errors through a defined status mechanism. Avoid performing unnecessary writes during normal audio transfer because they can interfere with block-based channel-status or user-data handling.
규정 준수 정보
The available directory record displays a RoHS verification-request state rather than a definitive compliance declaration. Formal environmental and material declarations should be requested from the manufacturer.