CY8C22213-24PI - 8-Bit 24MHz 2KB Flash MCU | Infineon
부품 번호: CY8C22213-24PI ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0.0619 | $0.06 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
CY8C22213-24PI 개요
A PSoC 1 mixed-signal array is a programmable system-on-chip architecture that integrates a microcontroller core with configurable analog and digital peripheral blocks. In the broader hierarchy, the CY8C22213-24PI belongs to the MCU -> embedded microcontroller -> mixed-signal controller family, combining sequential control with programmable sensor, timing, and interface functions.
The verified product listing identifies the device as an M8C PSoC 1 CY8C22xxx microcontroller with 8-bit processing, a 24 MHz maximum clock, 2 KB Flash organized as 2K x 8, and a 20-DIP package. The -24PI suffix and distributor records identify the commercial ordering configuration used for procurement, while the exact electrical limits and peripheral details require the manufacturer datasheet for design release.
Typical uses include compact industrial control, sensor conditioning, keypad interfaces, simple actuator controllers, and embedded products where a small flash footprint and 20-pin DIP package simplify prototyping or legacy board maintenance. The device's through-hole format is particularly useful when a controller must be inserted or replaced without a fine-pitch surface-mount assembly.
Designers should verify supply voltage, I/O limits, clock configuration, reset behavior, and available peripheral resources against the official datasheet before substitution. The 2 KB Flash capacity also makes firmware sizing and boot behavior important constraints; application code must fit within the available program memory after accounting for required startup and configuration routines.
This page combines verified distributor metadata, package and memory information, application context, and sourcing guidance. It does not infer unreported electrical limits or claim a drop-in replacement unless the manufacturer or distributor data explicitly establishes package and pin compatibility.
드롭인 대체품: CY8C22213-24PI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CY8C22213-24PI (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Mounting Type, Package, Product Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
CY8C22213-24PXI
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C22213-24PI 최대 정격 & 전기적 특성
| Product Type | 8-bit mixed-signal microcontroller |
| Architecture | M8C |
| Product Family | PSoC 1 CY8C22xxx |
| 최대 클록 주파수 | 24 MHz |
| Flash Memory | 2 KB (2K x 8) |
| Word Width | 8 bit |
| 패키지 | 20-DIP (0.300 inch, 7.62 mm) |
| 실장 유형 | Through-hole DIP |
| Core / Processor | M8C 8-bit core |
| Program Memory Type | Flash |
| Memory Organization | 2K x 8 Flash |
| Manufacturer | Infineon Technologies |
CY8C22213-24PI 20-dip (0.300 inch, 7.62 mm) 핀 구성 가이드
CY8C22213-24PI(20-dip (0.300 inch, 7.62 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CY8C22213-24PI.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CY8C22213-24PI 적합 용도: 6 애플리케이션s: Legacy Embedded Control, Compact Sensor Interface, Simple Keypad and Panel Controller, Small Industrial Control Module, Actuator and Relay Interface, Programmable Mixed-Signal Controller.
Legacy Embedded Control
The CY8C22213-24PI is a candidate for maintaining legacy embedded-control boards because the verified data identifies an 8-bit M8C core, 24 MHz maximum clock, 2 KB Flash, and a 20-DIP package. Its through-hole format can simplify replacement on older through-hole products. Before fitting it to a live board, confirm pinout, supply voltage, clock components, reset behavior, and firmware compatibility from the manufacturer datasheet. The 2 KB Flash limit may constrain repairs that add functions or diagnostics.
추천
Compact Sensor Interface
The PSoC 1 mixed-signal architecture makes the CY8C22213-24PI a possible fit for compact sensor-interface boards where the verified 8-bit M8C processor and 24 MHz clock provide basic control capability. Firmware can coordinate sensor reads, threshold decisions, and digital outputs, subject to the actual peripheral map and analog specifications in the datasheet. The 20-DIP package supports prototype wiring and through-hole assembly. Flash memory is only 2 KB, so data buffering and code organization must be planned carefully.
추천
Simple Keypad and Panel Controller
The CY8C22213-24PI can serve as a small keypad or front-panel controller when the application only needs basic sequencing, debounce logic, status indication, and actuator commands. The verified 24 MHz M8C core provides clock headroom for straightforward control tasks, while the 20-DIP package simplifies point-to-point construction. GPIO availability, electrical limits, and debounce performance must be verified because those values are not present in the supplied search data. Firmware overhead must also fit within the 2 KB Flash budget.
추천
Small Industrial Control Module
The CY8C22213-24PI is relevant to small industrial-control modules where a microcontroller, digital I/O, and programmable mixed-signal behavior are needed without a high-performance processor. Its 8-bit architecture and 2 KB Flash are appropriate only for modest control logic; applications requiring extensive logging, networking, or large protocol stacks should use a larger-memory MCU. The 20-DIP package may assist maintenance of older equipment, but industrial temperature, EMC, and lifecycle requirements must be confirmed before deployment.
추천
Actuator and Relay Interface
The CY8C22213-24PI can be evaluated for basic actuator, relay, or indicator control when its verified 8-bit processing and 24 MHz clock are sufficient. Firmware can implement state machines, timing, interlocks, and diagnostic outputs, while the through-hole package simplifies wiring in a small controller. The exact I/O current limits, supply voltage, isolation requirements, and drive topology are not supplied and must be taken from the datasheet. Add appropriate transistor, resistor, flyback, and protection components rather than driving loads directly without verification.
추천
Programmable Mixed-Signal Controller
The PSoC 1 CY8C22xxx family designation positions the CY8C22213-24PI for programmable mixed-signal control tasks, provided the device's verified datasheet confirms the required analog and digital blocks. The verified 2 KB Flash and 24 MHz maximum clock support a small embedded control program, but they do not by themselves establish the available ADC, DAC, timer, or comparator resources. Engineers should map the application requirements to the exact peripheral configuration and pin assignments. This device is best treated as a compact mixed-signal controller rather than a general-purpose high-memory MCU.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY8C22213-24PI — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CY8C22213-24PXI |
|---|---|---|
| Package | 20-DIP (0.300", 7.62mm) | 20-DIP format identified in comparison search |
| Brand | Infineon Technologies | Cypress Semiconductor family part; current manufacturer naming requires verification |
주요 차별점
- Mixed-signal PSoC architecture in a 20-DIP package (vs ATMEGA328-AU)
- 24 MHz maximum clock with 8-bit processing (vs ATMEGA8A-AUR)
- 2 KB Flash organized as 2K x 8 (vs STM32F030C6T6TR)
설계 노트
Use the verified 20-DIP format only as a starting point for mechanical planning. Before placing the part, obtain the manufacturer package drawing and confirm pin 1 orientation, notch or dimple location, row spacing, and every signal assignment. Do not copy a pinout from a different CY8C22xxx member because the same family can expose different peripheral mappings.
The supplied records do not state the allowable supply voltage or pin current limits. Before connecting sensors, relays, LEDs, or external logic, verify those limits in the datasheet and include appropriate series resistors, level translation, and protection. Power-supply decoupling must follow the manufacturer application circuit rather than relying only on generic MCU practice.
The 2 KB Flash capacity is a major firmware constraint. Estimate startup, interrupt, driver, protocol, and application code before committing to this MCU; keep a margin for configuration tables and future maintenance. A functionally similar replacement should not be treated as interchangeable merely because its product description uses similar terms, as the verified comparison search explicitly notes possible parameter and circuit-structure differences.
For a mixed-signal implementation, separate sensitive analog routing from switching or high-current digital paths and keep external support components close to their associated pins. The supplied data does not identify the analog block resources, so no specific pin-level routing prescription can be made. Validate the final layout against the manufacturer's reference circuit and measured noise requirements on prototype hardware.
규정 준수 정보
The supplied distributor records do not state RoHS, REACH, lead-free, halogen-free, conflict-mineral, or automotive qualification status. Confirm current declarations from Infineon for the exact ordering code.
