CY8C5466AXI-064 - 67MHz Cortex-M3 PSoC 5 | Infineon
부품 번호: CY8C5466AXI-064 ✓ 활성CY8C5466AXI-064 개요
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU with configurable analog and digital peripheral blocks. The CY8C54 device family extends the PSoC concept with Arm Cortex-M3 processing, deterministic peripheral resources, and programmable signal-chain functions. This architecture reduces the number of separate components required in sensing, control, and communication-oriented embedded products.
The principal device characteristics include a 67 MHz operating frequency, 64 KB of flash program memory, 16 KB of SRAM, 60 general-purpose I/O pins, and support for 1.8 V, 3.3 V, and 5 V operating voltages. The integrated internal oscillator reduces dependence on an external timing component, while the large pin count provides parallel interface options and extensive peripheral connectivity.
Its programmable architecture allows designers to assign digital functions such as timers, serial interfaces, and logic blocks while also using analog resources for signal conditioning. This configurability is useful when a product must combine control logic with sensor input, waveform generation, data acquisition, or communication functions while maintaining a compact bill of materials.
Typical PSoC 5 applications include industrial sensor controllers, building and automation equipment, consumer interfaces, communications equipment, and compact embedded control systems. The Arm Cortex-M3 processor handles conventional control tasks, while the PSoC peripherals can accelerate input/output operations and reduce reliance on discrete analog and logic ICs.
Designers should verify the pin configuration, power rails, clock requirements, and programmable peripheral assignments in the manufacturer datasheet and PSoC Creator project settings. The 100-pin TQFP footprint is suitable for multilayer boards, but careful grounding, decoupling, and routing of sensitive analog signals remain important for predictable performance.
This page organizes the core MCU specifications, package characteristics, application guidance, comparison considerations, and replacement limits into one engineering reference. It also distinguishes confirmed device attributes from parameters that still require verification against the exact ordering code and manufacturer documentation.
드롭인 대체품: CY8C5466AXI-064 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CY8C5466AXI-064 (동일 폼 팩터 및 풋프린트) — 차이점: Product Type.
CY8C5467AXI-011
✅ 드롭인가격 문의
데이터시트 보기 →CY8C5566AXI-061
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C5666AXI-LP004
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C5868AXI-LP032
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CY8C5466AXI-064 최대 정격 & 전기적 특성
| Product Type | Programmable System-on-Chip (PSoC 5) Microcontroller |
| Processor Core | Arm Cortex-M3, 32-bit |
| Maximum CPU Frequency | 67 MHz |
| Program Memory | 64 KB flash (64K x 8) |
| Static RAM | 16 KB (16K x 8) |
| Number of I/O Pins | 60 |
| 패키지 | 100-pin TQFP, 14 mm x 14 mm |
| Package Family | TQFP surface-mount package family |
| 실장 유형 | Surface mount |
| Operating Voltage Options | 1.8 V, 3.3 V, and 5 V |
| Oscillator Type | Internal oscillator |
| Programmable Architecture | Configurable digital and analog peripheral blocks |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Packaging | Tray |
CY8C5466AXI-064 tqfp surface-mount package family 핀 구성 가이드
CY8C5466AXI-064(tqfp surface-mount package family 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CY8C5466AXI-064.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CY8C5466AXI-064 적합 용도: 6 애플리케이션s: Industrial Sensor Controllers, Building Automation Equipment, Consumer Interface Controllers, Communication Equipment, Data Acquisition Modules, LED and Lighting Control.
Industrial Sensor Controllers
The CY8C5466AXI-064 fits industrial sensor controllers that must acquire, condition, and process several signals locally. Its 67 MHz Arm Cortex-M3 core supports responsive control logic, while 64 KB of flash accommodates application firmware and 16 KB of SRAM provides working memory for acquisition and conditioning tasks. The 60 available I/O pins allow sensors, indicators, and communications peripherals to share one controller. According to the Infineon product documentation, configurable digital and analog blocks can reduce the number of separate interface ICs. The trade-off is that the 100-pin TQFP requires careful routing and adequate board area, and the exact operating-temperature grade must be confirmed before deployment in an industrial enclosure.
추천
Building Automation Equipment
The CY8C5466AXI-064 is appropriate for building automation modules that coordinate digital inputs, sensor conditioning, and communication interfaces. Its 60 I/O pins provide substantial parallel connectivity for occupancy controls, alarm inputs, relay-status inputs, and local bus connections. The 67 MHz Cortex-M3 processor can run protocol handling alongside application logic, and the 64 KB flash capacity supports firmware updates and multiple communication tasks. According to the Infineon product documentation, the PSoC architecture combines programmable digital and analog resources rather than limiting the design to fixed general-purpose I/O. Verify the 1.8 V, 3.3 V, and 5 V rail combinations against the module power architecture and confirm the required temperature range for environmental conditions.
추천
Consumer Interface Controllers
The CY8C5466AXI-064 can serve as the central controller in a consumer interface product that combines buttons, indicators, a display peripheral, and communications logic. Its 60 I/O pins reduce the need for separate logic devices, while configurable digital blocks can support timing, debouncing, and interface functions. The 64 KB of flash is suitable for embedded control firmware, and the 16 KB of SRAM allows communication buffers and local state to operate without an external memory device. According to the Infineon product documentation, the internal oscillator supports clock generation for connected peripherals. Designers should still validate display timing, touch or sensing requirements, power sequencing, and electromagnetic compatibility for the finished enclosure and human-interface assembly.
추천
Communication Equipment
The CY8C5466AXI-064 is suitable for compact communication equipment requiring protocol processing alongside configurable logic and signal handling. Its 67 MHz Arm Cortex-M3 core can service interrupts and communication tasks, while the 60 I/O pins provide connections for serial interfaces, control signals, status indicators, and external transceivers. According to the Infineon product documentation, 64 KB of flash and 16 KB of RAM allow substantial firmware and data buffering to be integrated without an external microcontroller. The programmable peripheral blocks can implement fixed or configurable digital functions, reducing discrete logic. Verify each transceiver's signal timing against the selected PSoC configuration, apply series termination where required, and maintain separate analog and digital return paths to reduce coupling.
추천
Data Acquisition Modules
The CY8C5466AXI-064 can form the core of a compact data-acquisition module when an application requires simultaneous digital control, signal conditioning, and local processing. Its configurable analog resources can support conditioning tasks, while the 67 MHz Cortex-M3 processor handles sampling coordination, filtering, and data preparation. The 60 I/O pins allow digital status channels and external converter interfaces to coexist with analog measurements. According to the Infineon product documentation, the device integrates MCU, memory, analog, and digital functions in one programmable architecture. For a production design, verify converter accuracy, sampling requirements, input impedance, reference stability, and the permitted operating temperature directly from the manufacturer documentation for the selected external components.
추천
LED and Lighting Control
The CY8C5466AXI-064 fits multichannel LED and lighting controllers that require precise timing, local logic, and multiple outputs. Its 60 I/O pins can support LED status channels, control signals, switch inputs, and communications links, while the 67 MHz processor manages dimming algorithms, effects, and system supervision. According to the Infineon product documentation, programmable digital blocks offer flexible timing and signal-generation options within the PSoC 5 architecture. The 64 KB flash capacity is useful for storing lighting scenes and firmware, while 16 KB of RAM supports real-time control state. Validate LED driver topology, dimming frequency, current limits, thermal behavior, and ground-current paths before applying the MCU outputs to a lighting board.
추천
추천 제품 요약
엔지니어링 참조 데이터: CY8C5466AXI-064 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CY8C5467AXI-011 | CY8C5566AXI-061 | CY8C5666AXI-LP004 | CY8C5868AXI-LP032 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Series | CY8C54 PSoC 5 | CY8C54 PSoC 5 | CY8C55 PSoC 5 | CY8C56 PSoC 5 | CY8C58 PSoC 5 |
주요 차별점
- Documented 67 MHz performance target within the CY8C54 family (vs CY8C5467AXI-011)
- Defined 64 KB flash and 16 KB RAM configuration (vs CY8C5566AXI-061)
- Broad 60-I/O interface in a 100-pin TQFP (vs CY8C5666AXI-LP004)
설계 노트
Confirm every supply rail and its permitted sequence in the manufacturer datasheet before laying out the board. The device is associated with 1.8 V, 3.3 V, and 5 V operating options, but those values do not by themselves define every core, analog, or I/O rail. Place the recommended bypass capacitors adjacent to their associated supply pins, provide adequate current margin for 67 MHz operation and configured peripherals, and isolate sensitive analog supply paths from switching and high-current digital returns.
The 100-pin TQFP footprint has fine-pitch leads on all four sides and should be placed on a multilayer board with a continuous ground plane. Keep the MCU footprint free of accidental thermal-pad or exposed-pad assumptions unless the exact package drawing confirms one. Follow the manufacturer land-pattern dimensions rather than creating a footprint from the generic 14 mm body dimension, and provide unobstructed routing access to all peripheral pins.
Separate analog and digital return currents even though the device integrates both functions. Route sensitive analog inputs away from clock, switching-node, and high-current output paths; use a quiet ground reference for analog blocks and place analog input conditioning components close to their associated pins. Confirm which pins are routable in the selected PSoC Creator configuration because assigning a peripheral may restrict alternate functions on the same pad.
Do not treat the -064 suffix as a complete description of the device. Verify the 67 MHz speed grade, memory configuration, package, temperature range, and peripheral set against the exact ordering information. When evaluating the listed alternatives, compare both package pins and firmware configuration; a shared TQFP footprint does not ensure that analog routing, interrupt assignments, clock dividers, or peripheral resources are identical.
규정 준수 정보
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was included in the product records. The AEC-Q100 field is not applicable because this is a general-purpose microcontroller rather than an automotive-qualified ordering code.