DP15H1200TO101982 - 1200V 15A IGBT Module | Danfoss
부품 번호: DP15H1200TO101982 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DP15H1200TO101982 개요
An IGBT (Insulated Gate Bipolar Transistor) module is a power semiconductor device that combines the simple gate drive of a MOSFET with the high-current, low-conduction-loss capability of a bipolar transistor. Within the power electronics hierarchy, the IGBT module sits above discrete IGBTs and below complete power assemblies, forming the switching core of voltage-source inverters, motor drives, and power supplies. Modules integrate one or more IGBT dies with freewheeling diodes on a common isolated substrate, enabling compact, thermally efficient designs.
The DP15H1200TO101982 addresses the rigorous thermal and efficiency demands of modern industrial power conversion. Its 1200V collector-emitter voltage class supports direct operation from 400V to 690V AC line systems with appropriate headroom, while the 15A continuous current rating suits low-to-mid power inverters and auxiliary drives. Danfoss module construction emphasizes low thermal resistance and reliable solder or pressure-contact interconnects for long service life in industrial environments.
According to distributor documentation, the device integrates advanced silicon technology with a robust mechanical package, optimizing high-density power electronics designs. Typical applications include industrial motor drives, renewable energy inverters, welding power supplies, and servo amplifiers, where the 1200V rating and 15A current class provide a balance of ruggedness and efficiency.
When designing with this module, verify the exact package outline, terminal arrangement, and gate resistor recommendations from the manufacturer datasheet before committing to a PCB or busbar layout, as Danfoss module mechanical variants differ across the DP-series family. Thermal interface material selection and heatsink flatness directly affect junction temperature margins.
This page synthesizes distributor availability data, datasheet references, and sourcing guidance for the DP15H1200TO101982 that is not consolidated on the manufacturer's site, helping engineers evaluate drop-in feasibility and procurement options in one place.
드롭인 대체품: DP15H1200TO101982 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청DP15H1200TO101982 최대 정격 & 전기적 특성
| Device Type | IGBT Module |
| Collector-Emitter Voltage (VCE) | 1200 V |
| Continuous Collector Current | 15 A |
| Manufacturer | Danfoss |
DP15H1200TO101982 standard 핀 구성 가이드
DP15H1200TO101982(standard 패키지)의 핀 구성입니다. 이 전력 소자는 게이트, 드레인, 소스 단자를 갖추고 있습니다. 비편향 패키지의 경우 정확한 핀 1 방향과 풋프린트 세부 정보는 제조사 데이터시트를 참조하십시오. 일반적인 응용 분야로는 전원 공급 장치 설계, 모터 구동, 부하 스위칭이 있습니다.
다음에 대한 상세 핀아웃 데이터 없음: DP15H1200TO101982.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DP15H1200TO101982 적합 용도: 6 애플리케이션s: Industrial Motor Drives, Solar / Renewable Energy Inverters, Welding Power Supplies, Servo Amplifiers and Motion Control, UPS and Power Supply Front Ends, Induction Heating and Industrial Heating.
Industrial Motor Drives
The DP15H1200TO101982 fits low-to-mid power industrial motor drive inverter stages where its 1200V class supports rectified 400V AC three-phase input with surge margin, and its 15A continuous rating covers fractional to small integral-horsepower motors. In a voltage-source inverter bridge, the module switches at carrier frequencies of a few kilohertz, and its Danfoss industrial construction provides the thermal robustness expected in continuous-duty drive applications. Conduction and switching losses must be summed from the datasheet VCE(sat) and switching energy curves at the chosen carrier frequency to size the heatsink correctly. Distributor documentation identifies industrial power conversion as the module's primary design target, and the isolated baseplate construction simplifies mounting on standard drive heatsinks while maintaining required creepage and clearance distances for 1200V-class operation.
추천
Solar / Renewable Energy Inverters
In solar string inverters and small renewable conversion stages, the DP15H1200TO101982 offers a 1200V blocking rating that comfortably covers 400V-class and higher DC bus architectures with transient margin. The 15A current class suits residential and light-commercial inverter output stages or boost stages. IGBT technology brings high ruggedness against grid and DC-link transients compared with lower-voltage silicon alternatives, and Danfoss module packaging supports the long operational lifetimes demanded by 20-plus-year photovoltaic warranties. Designers should trade carrier frequency against switching loss using datasheet energy curves, since IGBT switching losses rise with frequency and directly affect inverter efficiency. Confirm the module internal configuration matches the intended half-bridge or boost topology before layout, and verify isolation voltage ratings against system insulation coordination requirements.
추천
Welding Power Supplies
Welding inverters impose repetitive high-current pulses and wide load transients, an environment the DP15H1200TO101982's rugged Danfoss industrial construction is built to survive. Its 1200V rating covers the rectified three-phase input stages common in industrial welders, while the 15A class suits lower-power arc and TIG inverter output stages or auxiliary converter sections. Thermal cycling endurance of the module interconnects is a key selection factor in welding duty cycles, favoring modules with proven bond-wire and solder fatigue margins such as this Danfoss series. Designers should derate the 15A continuous rating per the datasheet's duty-cycle curves for pulsed welding loads, and ensure the heatsink maintains junction temperatures within the specified operating range under peak current conditions. Verify terminal current-carrying capacity for busbar or lug connections in the datasheet outline drawing.
추천
Servo Amplifiers and Motion Control
Servo amplifiers benefit from the DP15H1200TO101982's combination of 1200V blocking voltage for 400V AC servo bus systems and 15A capability for small servo motor axes. In regenerative and rapid-reversal motion profiles, the module's IGBT characteristics and freewheeling diode path (configuration per datasheet) handle the bidirectional current flow inherent in four-quadrant operation. Danfoss industrial module construction provides the vibration and thermal cycling tolerance expected in factory automation environments. The key design consideration is switching loss at the 4 to 16 kHz PWM frequencies typical of servo current loops, so datasheet switching energy data should be used to optimize gate resistor selection and carrier frequency. The isolated baseplate eases thermal design within compact servo drive housings with forced-air cooling.
추천
UPS and Power Supply Front Ends
Uninterruptible power supplies and industrial switch-mode power supply front ends operate from rectified three-phase or single-phase mains, where the DP15H1200TO101982's 1200V class provides adequate blocking margin and its 15A rating serves low-to-mid power converter stages such as PFC boost or battery converter bridges. Reliability is the dominant requirement in UPS applications, and the module's isolated industrial packaging with proven interconnect technology supports the high availability targets of backup power systems. Switching frequency selection in the 8 to 20 kHz range balances audible noise against switching loss using the datasheet energy curves. Ensure the DC-link voltage, including battery equalization and floating bus conditions, remains below the 1200V rating with the recommended derating margin specified in the manufacturer documentation.
추천
Induction Heating and Industrial Heating
Induction heating inverters demand robust switching devices capable of handling resonant currents and high dv/dt events; the DP15H1200TO101982's 1200V rating and Danfoss industrial construction make it applicable to low-power induction heating converter stages and auxiliary heating power supplies. The IGBT's rugged short-circuit withstand characteristics, as specified in the manufacturer datasheet, provide fault tolerance during load shorts and workpiece anomalies common in heating processes. Designers must characterize the resonant tank to keep peak device currents within the 15A class rating under worst-case coupling conditions, and use soft-switching topologies where possible to reduce switching loss. Thermal design should account for the cyclic load nature of heating applications, using the datasheet thermal impedance curves for transient junction temperature estimation during repeated heat-on/heat-off cycles.
추천
추천 제품 요약
엔지니어링 참조 데이터: DP15H1200TO101982 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Collector-Emitter Voltage | 1200 V |
| Continuous Current | 15 A |
| Device Type | IGBT Module |
| Brand | Danfoss |
| Verified Drop-in Alternative | None found in web data as of 2026-10-11 |
주요 차별점
- Danfoss industrial-grade module construction (vs Unverified generic 1200V/15A modules)
- 1200V class with 15A current in a compact module (vs Discrete IGBT solutions)
- Limited third-party substitution risk protection (vs Multi-source standard packages)
설계 노트
Junction temperature management dominates reliability in 1200V IGBT modules. Estimated: total loss = conduction loss (VCE(sat) x average current x duty) plus switching loss (Eon+Eoff) x switching frequency. Since the DP15H1200TO101982 VCE(sat) and switching energy values must be taken from the manufacturer datasheet, perform this calculation before heatsink selection and apply the datasheet Rth(j-c) together with thermal interface material and heatsink Rth to verify junction temperature stays within the rated operating range with margin. Keep case-to-heatsink flatness within interface material manufacturer limits and follow the datasheet mounting torque specification.
Although the module terminals connect via lugs or busbars rather than PCB traces, the gate drive PCB layout directly affects switching performance. Keep the gate-emitter loop inductance minimal by routing the driver output and return as a tightly coupled pair, and place the gate resistor physically close to the module gate terminal. Separate the power commutation loop (DC-link to module) from sense and control grounds, using a single star ground reference. Use Kelvin-emitter connections if the module provides auxiliary emitter terminals per the datasheet pinout drawing.
Three common pitfalls with Danfoss module substitutions: first, the letter O versus digit 0 in order codes (DP15H1200TO101982 vs DP15H1200T0101982) causes frequent mis-ordering - confirm the marking against the datasheet. Second, do not assume mechanical compatibility across DP-series variants; outline drawings differ between family members and busbar drilling must match the specific module. Third, DC-link bus voltage transients must be clamped well below 1200V with appropriate snubbing, since avalanche capability is not a design tool for IGBT modules.
규정 준수 정보
Compliance declarations were not stated in the verified distributor listings; obtain formal RoHS/REACH certificates from Danfoss or the selling distributor.
