DSPIC33CK128MP203-E/M5 - 100MHz 16-Bit DSC | Microchip
부품 번호: DSPIC33CK128MP203-E/M5 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.06 | $4.06 |
| 10 | $3.72 | $37.20 |
| 100 | $3.35 | $335.00 |
| 500 | $2.95 | $1,475.00 |
| 1,000 | $2.2 | $2,200.00 |
DSPIC33CK128MP203-E/M5 개요
A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power management hierarchy, the dsPIC33CK family sits at the top of Microchip's single-core 16-bit DSC line, targeting closed-loop control systems where fast interrupt response and specialized control peripherals (PWM, ADC, comparators, op-amps) execute loops at switching frequencies of hundreds of kilohertz.
Key features include a modified Harvard architecture executing up to 100 MIPS, dual-partition Flash with ECC and live update for field firmware upgrades without downtime, Memory Built-In Self-Test (MBIST) for functional-safety designs, and Peripheral Trigger Generator (PTG) for hardware-sequenced operation. The integrated analog suite includes 3 operational amplifiers and 3 analog comparators, reducing external component count in power conversion stages.
The 36-pin device pairs its high-resolution PWM and CAN Flexible Data (CAN FD) module with a 12-bit high-speed ADC pipeline suited to peak current-mode control of buck, boost, LLC, and totem-pole PFC converters. The on-chip op-amps can be configured as inverting or non-inverting gain stages feeding the ADC directly, enabling single-shunt or multi-shunt motor phase current sensing with minimal board area.
Typical applications include digital switched-mode power supplies, BLDC and PMSM motor control, automotive power conversion modules, and industrial sensing and control nodes that require a CAN FD interface. The extended temperature grade makes it suitable for under-hood and high-power-density environments.
Design consideration: the 3.0V to 3.6V operating window means the 5V rails common in industrial systems require a local LDO or buck regulator; also budget the exposed pad as the primary ground and thermal path for best high-frequency performance.
This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: DSPIC33CK128MP203-E/M5 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33CK128MP203-E/M5 (동일 폼 팩터 및 풋프린트) — 차이점: Data SRAM, Package, Program Flash, Operating Temperature, PWM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33CK128MP203-I/M5
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.79 / 개
데이터시트 보기 →DSPIC33CK64MP203-E/M5
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33CK256MP203-E/M5
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →DSPIC33CK32MP203-E/M5
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33CK128MP203-E/M5 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33CK DSC core (modified Harvard) |
| Maximum Core Speed | 100 MHz (100 MIPS) |
| Program Flash | 128 KB (128K x 8) with ECC and dual-partition live update |
| Data SRAM | 16 KB with MBIST |
| 공급 전압 | 3.0 V to 3.6 V |
| 동작 온도 | -40C to +150C (E grade) |
| 패키지 | 36-UQFN (5x5 mm) exposed pad |
| 실장 유형 | Surface Mount |
| Qualification | Automotive, AEC-Q100, Functional Safety (FuSa) |
| On-Chip Op-Amps | 3 |
| Analog Comparators | 3 |
| PWM | High-Resolution PWM |
| CAN Interface | CAN Flexible Data (CAN FD) |
| Special Peripherals | Peripheral Trigger Generator (PTG) |
| Product Series | dsPIC33CK 28/36/48/64/80-Pin 16-bit DSC |
| RoHS 상태 | Compliant |
| Typical Unit Price | USD 2.20 to 4.06 (as of 2026-09-22, distributor range) |
DSPIC33CK128MP203-E/M5 36-uqfn (5x5 mm) exposed pad 핀 구성 가이드
DSPIC33CK128MP203-E/M5(36-uqfn (5x5 mm) exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33CK128MP203-E/M5.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33CK128MP203-E/M5 적합 용도: 6 애플리케이션s: Digital Switched-Mode Power Supplies, BLDC / PMSM Motor Control, Automotive Power Conversion Modules, Industrial Sensing and Control Nodes, Advanced Power-Metering and Precision Measurement, High-Density Embedded Control with Live Update.
Digital Switched-Mode Power Supplies
The DSPIC33CK128MP203-E/M5 fits digital SMPS control because its 100 MHz (100 MIPS) core closes current-mode loops at the switching frequency while the high-resolution PWM delivers fine duty-cycle resolution for buck, boost, LLC, and totem-pole PFC topologies. The 3 on-chip comparators implement cycle-by-cycle overcurrent trips in hardware with no software latency, and the 3 op-amps can amplify shunt-resistor signals ahead of the ADC, removing external analog gain stages. In a typical converter, the DSC reads input/output voltages and inductor current each switching cycle, computes the control law, and updates the PWM comparators; dual-partition Flash with ECC allows field firmware updates of control coefficients without production downtime.
추천
BLDC / PMSM Motor Control
For brushless DC and permanent-magnet synchronous motor drives, the DSPIC33CK128MP203-E/M5 provides field-oriented control execution at 100 MIPS while its 3 op-amps and 3 comparators form the phase-current sensing and protection front end, supporting single-shunt and multi-shunt configurations with minimal external components. The high-resolution PWM generates complementary outputs with programmable dead time for the three-phase inverter, and the ADC synchronizes sampling to PWM centers to avoid switching noise. The PTG peripheral can sequence ADC triggers autonomously, offloading the CPU. In automotive traction-auxiliary and industrial pump/fan drives, the AEC-Q100 qualification and -40C to +150C rating of this E-grade part cover harsh thermal environments.
추천
Automotive Power Conversion Modules
The E-grade DSPIC33CK128MP203 is explicitly positioned by Microchip for automotive applications, carrying AEC-Q100 qualification and Functional Safety (FuSa) support with operation to +150C. This suits 48V/12V DC-DC converters, battery-management auxiliary supplies, and solenoid controllers located near the engine or power electronics where ambient temperatures exceed standard industrial ratings. The integrated CAN FD module connects the controller to in-vehicle networks at data rates beyond classic CAN, while MBIST and ECC on the memory subsystems support safety analyses. Dual-partition live update enables field reprogramming of installed ECUs, reducing recall exposure during software maintenance cycles.
추천
Industrial Sensing and Control Nodes
In industrial automation, the DSPIC33CK128MP203-E/M5 serves as a smart sensor node or local controller that acquires analog signals through its op-amp/ADC front end, executes DSP filtering (FIR/IIR) at up to 100 MIPS, and reports over CAN FD to PLC or SCADA systems. The Peripheral Trigger Generator automates measurement timing without CPU intervention, reducing jitter in periodic sampling. The extended -40C to +150C operating range tolerates enclosures mounted near motors, drives, or heating equipment where conventional 85C-rated MCUs derate. Its deterministic interrupt architecture provides the predictable response times required for limit monitoring and safety shutdown logic.
추천
Advanced Power-Metering and Precision Measurement
The DSC's DSP multiply-accumulate instructions and 100 MHz pipeline enable real-time RMS calculation, harmonic analysis, and power-factor computation on sampled voltage and current channels. The on-chip 3 op-amps condition shunt or CT signals into the ADC range, and synchronized PWM-triggered sampling guarantees the equal sample spacing that accuracy in RMS and energy integration depends on. The 128 KB Flash holds both the measurement engine and communication stacks (CAN FD, UART), and the 16 KB SRAM with MBIST buffers waveform snapshots for event capture in smart meters, submetering, and industrial energy-monitoring equipment operating over wide temperature ranges.
추천
High-Density Embedded Control with Live Update
Systems requiring in-field firmware upgrade without downtime benefit from the dual-partition Flash with ECC and live update: the controller continues executing from the active partition while the new image is written to the inactive one, then a validated switchover occurs. This architecture, combined with CAN FD for image delivery and MBIST for runtime memory verification, targets automotive ECUs, networked power supplies, and remotely deployed industrial controllers. The 36-pin UQFN 5x5 mm footprint conserves board area in dense assemblies, and the Peripheral Trigger Generator sustains background I/O sequencing during the update window so control loops remain uninterrupted throughout the process.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33CK128MP203-E/M5 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33CK128MP203-I/M5 | DSPIC33CK64MP203-E/M5 | DSPIC33CK256MP203-E/M5 |
|---|---|---|---|---|
| Package | 36-UQFN (5x5 mm) exposed pad | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 128 KB (ECC, dual partition) | 128 KB | 64 KB | 256 KB |
| Data SRAM | 16 KB | 16 KB | 8 KB | 32 KB |
| Core Speed | 100 MHz (100 MIPS) | 100 MHz | 100 MHz | 100 MHz |
| Operating Temperature | -40C to +150C (E grade) | -40C to +125C (I grade) | -40C to +150C | -40C to +150C |
| Analog Peripherals | 3 op-amps, 3 comparators | 3 op-amps, 3 comparators | 3 op-amps, 3 comparators | 3 op-amps, 3 comparators |
| Automotive Qualification | AEC-Q100, FuSa | Industrial grade | AEC-Q100 | AEC-Q100 |
주요 차별점
- Extended temperature range to +150C (vs DSPIC33CK128MP203-I/M5)
- Balanced 128 KB Flash capacity (vs DSPIC33CK64MP203-E/M5)
- Cost-optimized memory point (vs DSPIC33CK256MP203-E/M5)
설계 노트
The exposed pad of the 36-UQFN 5x5 mm package is the principal ground return. Connect it to the ground plane with a 3x3 or larger via array under the footprint; this minimizes ground bounce for the ADC/op-amp analog front end and conducts heat for operation up to +150C. Keep the analog ground region under the op-amp/comparator pins quiet by separating high-current power-stage ground returns from the DSC local ground and joining them at a single point.
The device operates only from 3.0V to 3.6V. In 5V or 24V industrial systems, generate the 3.3V rail locally with an LDO or small buck, and ensure it can source the peak core current at 100 MIPS plus I/O loads. Decouple VDD with 0.1uF ceramic capacitors at each supply pin plus one 4.7uF to 10uF bulk capacitor; place the smallest capacitors closest to the pins to support the fast core clock edges.
When using the on-chip op-amps to sense motor or converter currents, route shunt signals differentially and keep the traces away from PWM gate-drive lines. Synchronize ADC sampling to the PWM period via the Peripheral Trigger Generator so sampling occurs away from switching edges - this typically improves effective current-signal accuracy substantially and avoids the need for heavy software filtering.
Do not substitute the -E (150C) part into cost calculations assuming -I (125C) pricing - extended-temperature automotive parts carry a price premium and different stock allocation. Also confirm that dual-partition live-update bootloaders reserve the correct partition size for the 128 KB Flash, since a bootloader sized for the 64 KB family variant will mis-map partitions and brick the update path.
규정 준수 정보
Classified as Automotive, AEC-Q100, dsPIC 33CK series with Functional Safety (FuSa) support per distributor product listings. RoHS and lead-free status per standard Microchip current production.