DSPIC33EP128MU502-I/SP - 70MIPS 16-bit USB DSC | Microchip
부품 번호: DSPIC33EP128MU502-I/SP ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.12 | $5.12 |
| 10 | $4.62 | $46.20 |
| 100 | $4.15 | $415.00 |
| 500 | $3.75 | $1,875.00 |
| 1,000 | $3.38 | $3,380.00 |
DSPIC33EP128MU502-I/SP 개요
A digital signal controller combines the computational capability of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, DSCs occupy the space between general-purpose MCUs and dedicated DSPs, making them the device of choice for control loops that need both fast math (MAC instructions, DSP engine) and flexible digital and analog peripherals.
Key features of this part include the dsPIC33E 16-bit core running at up to 70 MIPS, 128 KB of self-programmable Flash, 16 KB of on-chip RAM, and full-speed USB 2.0 On-The-Go (OTG) capability, which distinguishes the MU sub-family from the GP and MC variants. A 12-bit ADC with multiple sample-and-hold circuits supports simultaneous sampling for high-precision control applications.
Architecturally, the dsPIC33EP core pairs two 40-bit wide accumulators and a hardware DSP engine (17x17 MAC, dual operand fetch) with deterministic interrupt latency, allowing filter and control algorithms to execute in fixed cycle counts. In-Circuit Serial Programming (ICSP) and in-circuit debugging are supported through the MPLAB SNAP or PICkit programmers using just two device I/O pins.
Typical applications include USB-connected industrial instruments, digital power supplies and PFC converters, brushless DC motor control, and general embedded systems that benefit from DSP-class math in a DIP package that is easy to prototype and socket.
Design consideration: the dsPIC33EP core requires a VDDCORE/VCAP stabilization capacitor on pin 11; do not omit it, and sequence 3.3V supply within the 3.0V to 3.6V operating range.
This page synthesizes distributor inventory data, drop-in alternatives, pricing tiers, and practical design notes beyond what the manufacturer datasheet provides.
드롭인 대체품: DSPIC33EP128MU502-I/SP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EP128MU502-I/SP (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Mounting Type, ADC Resolution, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EP128MU502-E/SP
✅ 드롭인✓ 재고 있음
$4.55 / 개
데이터시트 보기 →DSPIC33EP128MU502-H/SP
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →DSPIC33EP128GP502-I/SP
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP128MC502-I/SP
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.55 / 개
데이터시트 보기 →DSPIC33EP128MU502-I/SP 최대 정격 & 전기적 특성
| Core | dsPIC33E 16-bit DSC |
| CPU Speed | 70 MIPS |
| Program Memory (Flash) | 128 KB |
| RAM | 16 KB |
| 공급 전압 | 3.0 V to 3.6 V |
| 동작 온도 | -40C to +85C (I grade) |
| 패키지 | 28-pin SPDIP (SP) |
| ADC Resolution | 12-bit |
| USB | USB 2.0 OTG, full speed |
| Programming Interface | ICSP (2-wire), in-circuit debug |
| 실장 유형 | Through Hole |
| Packaging | Tube |
DSPIC33EP128MU502-I/SP 핀 구성
| 핀 1 | MCLR — Master clear reset / ICSP programming voltage input |
| 핀 2 | AN0/RB0/PGED1 — Analog input 0 / Port B / primary debug data |
| 핀 3 | AN1/RB1/PGEC1 — Analog input 1 / Port B / primary debug clock |
| 핀 4 | AN2/RB2 — Analog input 2 / Port B |
| 핀 5 | AN3/RB3 — Analog input 3 / Port B |
| 핀 6 | AN4/RB4 — Analog input 4 / Port B |
| 핀 7 | VDD — Positive supply, 3.0 V to 3.6 V |
| 핀 8 | VSS — Ground reference |
| 핀 9 | OSC1/CLKI/RA2 — Oscillator crystal input / external clock input |
| 핀 10 | OSC2/CLKO/RA3 — Oscillator crystal output / clock output |
| 핀 11 | VCAP/VDDCORE — Internal core regulator stabilization capacitor (connect low-ESR capacitor to VSS) |
| 핀 12 | RA4/RP4 — Port A / remappable peripheral pin |
| 핀 13 | RA5/RP5 — Port A / remappable peripheral pin |
| 핀 14 | VSS — Ground reference |
| 핀 15 | RB5/RP6/SOSCI — Port B / remappable pin / secondary oscillator input |
| 핀 16 | RB6/RP7/SOSCO — Port B / remappable pin / secondary oscillator output |
| 핀 17 | RB7/RP8 — Port B / remappable peripheral pin |
| 핀 18 | RB8/RP9 — Port B / remappable peripheral pin |
| 핀 19 | RB9/RP10 — Port B / remappable peripheral pin |
| 핀 20 | RB10/RP11 — Port B / remappable peripheral pin |
| 핀 21 | RB11/RP12 — Port B / remappable peripheral pin |
| 핀 22 | RB12/RP13/PGD2 — Port B / remappable pin / secondary debug data |
| 핀 23 | RB13/RP14/PGC2 — Port B / remappable pin / secondary debug clock |
| 핀 24 | VDD — Positive supply, 3.0 V to 3.6 V |
| 핀 25 | RB14/RP15/PGD1 — Port B / remappable pin / primary ICSP data |
| 핀 26 | RB15/RP16/PGC1 — Port B / remappable pin / primary ICSP clock |
| 핀 27 | AVSS — Analog ground reference |
| 핀 28 | AVDD — Analog positive supply |
일반적인 애플리케이션
DSPIC33EP128MU502-I/SP 적합 용도: 6 애플리케이션s: USB-Connected Industrial Instruments, Digital Power Supplies and PFC Converters, Brushless DC Motor Control, Embedded Audio and Signal Processing, Sensor Data Loggers and IoT Edge Nodes, Prototyping and Educational Systems.
USB-Connected Industrial Instruments
The DSPIC33EP128MU502-I/SP fits USB-connected instruments because it is one of the few DSCs combining full-speed USB 2.0 OTG with a 70 MIPS DSP engine in a through-hole package. Placed as the main controller, its USB OTG peripheral handles device/host roles for data logging and firmware field updates, while the hardware MAC accelerator executes FFT filtering on 12-bit ADC samples. The 128 KB Flash supports protocol stacks plus application code with headroom. Trade-off: the 3.0V to 3.6V supply requires a 3.3V regulator ahead of the part, and the VDDCORE capacitor is mandatory for stable core regulation.
추천
Digital Power Supplies and PFC Converters
Digital power and PFC designs benefit from the MU502's deterministic 70 MIPS core and dual 40-bit accumulators, which execute voltage/current control loops at fixed cycle counts. The 12-bit ADC with multiple sample-and-hold circuits can sample input and output rails in the same cycle, critical for feed-forward compensation. PWM peripherals generate the switching waveforms while the DSP engine runs the compensator. Because switching converters inject noise, keep analog grounds separate per the datasheet AVSS/AVDD guidance. The 128 KB Flash accommodates compensation tables, soft-start ramps, and fault-logging code without external memory.
추천
Brushless DC Motor Control
The MU502 supports BLDC control with its fast core, 12-bit ADC, and PWM generation, executing trapezoidal or FOC commutation loops in software at 70 MIPS. Sensorless back-EMF detection uses the ADC with hardware sample triggers synchronized to PWM events. The hardware 17x17 MAC accelerates Clarke/Park transforms. Note the trade-off: the dedicated motor-control sub-family (DSPIC33EP128MC502) provides complementary PWM outputs and fault inputs, so for high-current drives prefer the MC variant; the MU502 is best where motor control is combined with USB reporting or host connectivity in one chip.
추천
Embedded Audio and Signal Processing
The DSP engine - 17x17 hardware multiplier, dual 40-bit accumulators, and modulo addressing - makes the MU502 effective for embedded audio filtering, AGC, and spectral analysis. The 12-bit ADC digitizes microphone or line-level signals after external anti-alias filtering, while processed output streams over USB OTG to a host or over SPI/I2C to a codec. Running filters at 70 MIPS leaves substantial cycle margin at typical 48 kHz sample rates. Budget RAM carefully: 16 KB limits buffer depths, so design filter block sizes around available X and Y data memory before committing to long convolution kernels.
추천
Sensor Data Loggers and IoT Edge Nodes
As a data-logger controller, the MU502 pairs its 12-bit ADC with multiple sensor inputs and its USB OTG port for data offload and configuration, avoiding a separate USB bridge chip. The 128 KB Flash stores calibration tables and logging firmware; 16 KB RAM buffers sampled batches before transfer. The industrial -40C to +85C rating suits unconditioned environments. For battery-powered nodes, characterize the core regulator's VDDCORE capacitor leakage and consider the lower-power PIC16LF family for sleep-dominant designs - the dsPIC33EP targets compute-heavy, duty-cycled acquisition rather than nanoamp sleep budgets.
추천
Prototyping and Educational Systems
The 28-pin SPDIP through-hole package makes the MU502 uniquely approachable for prototyping, breadboarding, and university labs - it sockets directly into 0.1-inch perforated boards without adapters. The full-speed USB OTG peripheral lets students build real HID or CDC devices, while the DSP engine teaches fixed-point signal processing on professional-grade hardware. Programming uses MPLAB SNAP or PICkit over two-wire ICSP with just MCLR, PGD, and PGC exposed. The industrial temperature grade means lab prototypes behave identically to production parts, and the -E extended-grade variant can be substituted without any design change when environmental testing is added.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EP128MU502-I/SP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EP128MU502-E/SP | DSPIC33EP128MU502-H/SP | DSPIC33EP128GP502-I/SP | DSPIC33EP128MC502-I/SP |
|---|---|---|---|---|---|
| Package | 28-pin SPDIP (SP) | 28-pin SPDIP (SP) - same | 28-pin SPDIP (SP) - same | 28-pin SPDIP (SP) - same | 28-pin SPDIP (SP) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / MIPS | dsPIC33E, 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash / RAM | 128 KB / 16 KB | 128 KB / 16 KB | 128 KB / 16 KB | 128 KB / 16 KB | 128 KB / 16 KB |
| USB OTG | Yes (full speed) | Yes (full speed) | Yes (full speed) | No | No |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +150C | -40C to +85C | -40C to +85C |
| ADC Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 12-bit |
| Distinguishing Peripheral | USB 2.0 OTG | USB 2.0 OTG (same die) | USB 2.0 OTG (same die) | General-purpose peripherals | Motor-control PWM module |
주요 차별점
- USB 2.0 OTG on-chip (vs DSPIC33EP128GP502-I/SP)
- Extended temperature drop-in options on the identical die (vs DSPIC33EP128MU502-E/SP)
- Through-hole SPDIP package for a 70 MIPS DSC (vs DSPIC33EP128MC502-I/SP (also available in SS/SO))
설계 노트
The dsPIC33EP core includes an internal regulator; the VCAP/VDDCORE pin (pin 11 on SPDIP-28) must be tied to a low-ESR ceramic capacitor to ground. Omitting this capacitor or using a high-ESR part causes core-rail droop and intermittent brownout resets, especially at 70 MIPS where core current demand spikes. Keep the 3.3V main supply within 3.0V to 3.6V under all load transients and add 100 nF decoupling at both VDD pins (7, 24) plus AVDD (28).
Even in a through-hole design, keep the analog domain clean: route ADC input traces away from PWM and USB lines, and connect AVSS (pin 27) to a quiet star ground rather than sharing a long return path with switching loads. For socketed prototypes, note that DIP sockets add inductance that can degrade high-speed remappable pin (RPn) signal integrity; for USB full-speed operation, minimize stub length between the device and the connector.
Two frequent mistakes: (1) assuming the MU502's USB peripheral means a 5V-tolerant VBUS pin handling - the USB VBUS sensing must be implemented within the datasheet absolute maximum ratings, typically via a resistor divider on an ADC-capable pin; (2) mixing up -I, -E, and -H temperature suffixes during BOM entry - all three share the same footprint, so a wrong suffix passes DRC but can fail in the field at extreme temperatures. Verify the suffix on incoming parts and confirm RPn pin mappings in code against the current family datasheet before freezing layout.
규정 준수 정보
Compliance details were not present in the provided web data. Confirm RoHS/REACH status on the official Microchip product page or datasheet before procurement.
