DSPIC33EP256MC204-I/TL - 16-bit DSC 256KB 70MIPS | Microchip
부품 번호: DSPIC33EP256MC204-I/TL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.62 | $5.62 |
| 10 | $5.08 | $50.80 |
| 100 | $4.55 | $455.00 |
| 500 | $4.12 | $2,060.00 |
| 1,000 | $3.78 | $3,780.00 |
DSPIC33EP256MC204-I/TL 개요
A digital signal controller combines the computational elements of a microcontroller - flash memory, SRAM, GPIO, and serial peripherals - with the numeric horsepower of a DSP, including a 24-bit instruction word, DSP multiply-accumulate instructions, and a barrel shifter. In the power-management hierarchy, the dsPIC33EP256MC204 sits above basic MCUs and below standalone DSPs, making it the standard choice for real-time embedded control systems such as motor drives and digital power conversion.
Key features include the 70 MIPS dsPIC33E core running at 60 MHz, 256 KB of self-programmable FLASH with ECC support, and an integrated peripheral set purpose-built for motor control: MCPWM (motor control PWM), QEI (quadrature encoder interface), on-chip op amps, and comparators. Communication coverage spans I2C, SPI, UART/USART, IrDA, and LINbus, and in-circuit serial programming (ICSP) is supported via multiple PGECx/PGEDx pin pairs.
Technically, the device executes a fixed-point instruction set with hardware DSP instructions and a barrel shifter, and includes boundary-scan capability for board-level test. The 44-VTLA 6x6 mm QFN-style package keeps parasitic inductance low for fast PWM switching and offers a compact footprint for space-constrained drives.
Typical applications include BLDC and PMSM motor control, digital power supplies (PFC, LLC), sensorless FOC drives, and industrial automation nodes requiring encoder feedback via QEI.
Design consideration: the /I temperature grade covers -40C to +85C; for ambient extremes beyond this range, select the /E (-40C to +125C) variant, and connect all VDD/VSS pairs as required by the datasheet.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: DSPIC33EP256MC204-I/TL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EP256MC204-I/TL (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Supply Voltage, Operating Temperature, Communication Interfaces.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EP256MC204-E/TL
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP128MC204-I/TL
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.4 / 개
데이터시트 보기 →DSPIC33EP64MC204-I/TL
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$3.07 / 개
데이터시트 보기 →DSPIC33EP256MC204T-I/TL
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →DSPIC33EP256MC204-I/TL 최대 정격 & 전기적 특성
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum MIPS | 70 MIPS |
| CPU Speed | 60 MHz |
| Program Memory | 256 KB (85.5K x 24) FLASH |
| RAM | 32 KB (16K x 16) |
| 패키지 | 44-VTLA (6x6 mm) |
| 동작 온도 | -40C to +85C (I grade) |
| Motor Control Peripherals | MCPWM, QEI |
| Analog Peripherals | Op amps, comparators |
| Communication Interfaces | I2C, SPI, UART/USART, IrDA, LINbus, QEI |
| DSP Features | Fixed-point DSP instructions, barrel shifter |
| Debug/Test | Boundary scan, ICSP (multiple PGECx/PGEDx pairs) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
DSPIC33EP256MC204-I/TL 44-vtla (6x6 mm) 핀 구성 가이드
DSPIC33EP256MC204-I/TL(44-vtla (6x6 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33EP256MC204-I/TL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33EP256MC204-I/TL 적합 용도: 6 애플리케이션s: BLDC / PMSM Motor Control, Digital Power Conversion, Sensorless FOC Drives, Industrial Automation Nodes, Embedded Control with Field Upgrade, Robotics and Motion Control.
BLDC / PMSM Motor Control
The dsPIC33EP256MC204-I/TL fits Brushless DC and permanent-magnet synchronous motor control because its MCPWM peripheral generates complementary, dead-time-inserted PWM outputs while the QEI interface decodes quadrature encoder feedback in hardware, offloading the control loop. The 70 MIPS DSP core executes field-oriented control (FOC) inner current loops at 10-20 kHz with substantial cycle margin, and the on-chip op amps condition shunt-current sense signals without external amplifiers. Place the DSC between the gate-driver front end and the communication bus, using the 256 KB FLASH to hold sensorless observers (SMO, MRAS) alongside the control firmware. Because PWM edges switch in nanoseconds, keep the MCPWM output traces short and away from analog sense lines to preserve ADC accuracy.
추천
Digital Power Conversion
In digital power supplies - PFC stages, LLC resonant converters, and bidirectional DC-DC chargers - the dsPIC33EP256MC204-I/TL provides high-resolution MCPWM outputs with complementary drive and fast analog comparators for cycle-by-cycle overcurrent protection. The 70 MIPS core runs voltage- and current-loop compensation at switching frequencies of 100 kHz to several hundred kHz, and the 256 KB FLASH accommodates soft-start, fault management, and PMBus-style communication stacks in one device. Its integrated op amps eliminate discrete error amplifiers, reducing BOM count. Layout consideration: route the comparator and ADC sense lines as a differential pair close to the power stage and use a star ground to prevent switching transients from triggering false overcurrent trips.
추천
Sensorless FOC Drives
For sensorless field-oriented-control drives where encoders or resolvers are removed for cost or reliability, the dsPIC33EP256MC204-I/TL supplies the DSP arithmetic (fixed-point MAC instructions, barrel shifter) needed for sliding-mode and MRAS observers that estimate rotor position in real time. The 32 KB RAM holds observer state variables plus current/voltage history buffers at 40+ kHz sampling, while integrated comparators implement hardware speed-up overcurrent limiting independent of software. The 256 KB FLASH leaves ample room for both the observer algorithms and application-layer logic such as CANopen profiles. Execute the estimation loop in the MCPWM interrupt with a deterministic cycle budget; the 70 MIPS core typically completes a two-phase current FOC iteration in under 20% of a 10 kHz period.
추천
Industrial Automation Nodes
In factory automation nodes - conveyors, pumps, fans, and actuator controllers - the dsPIC33EP256MC204-I/TL combines motor control with the connectivity industrial networks require: UART supports Modbus RTU, SPI and I2C attach local I/O expanders and sensors, and LINbus covers cost-sensitive distributed nodes. The QEI peripheral reads rotary encoder position from machinery axes in hardware with zero CPU overhead, enabling precise motion coordination. The -40C to +85C /I temperature rating covers unconditioned control cabinets, and the 44-pin 6x6 mm VTLA fits into compact DIN-rail modules. For noisy industrial environments, series-resist and TVS-protect the UART/QEI lines entering the device, and use twisted-pair cabling for encoder signals to preserve QEI edge integrity.
추천
Embedded Control with Field Upgrade
Applications requiring in-field firmware updates - remote pumps, agricultural equipment, HVAC drives - benefit from the self-programmable 256 KB FLASH of the dsPIC33EP256MC204-I/TL. The device can write its own program memory, enabling bootloader architectures that receive new firmware over UART or LINbus while preserving a protected boot sector. The 256 KB capacity stores both an application image and a backup image for fail-safe rollback, which smaller 64/128 KB variants cannot always accommodate. Multiple PGECx/PGEDx ICSP pairs allow production programming fixtures to connect on any convenient pair, simplifying test-point placement per Microchip programming guidance. Reserve a GPIO-safe boot-entry mechanism and validate the CRC of downloaded images before jumping to the application vector.
추천
Robotics and Motion Control
Robot joints and multi-axis motion stages use the dsPIC33EP256MC204-I/TL as a per-axis servo controller: QEI tracks the joint encoder, MCPWM drives the H-bridge or three-phase inverter, and the DSP core closes position/velocity/current cascaded loops at kilohertz rates. The 70 MIPS performance supports trajectory interpolation lookahead locally while a master controller streams setpoints over UART or SPI. The -40C to +85C rating suits unregulated robot-base temperatures, and the 6x6 mm VTLA mounts directly on joint motor driver boards where space is scarce. Synchronize multiple axes by daisy-chaining a SYNC signal into the MCPWM module so all PWM ramps update on the same PWM cycle edge, eliminating inter-axis skew.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EP256MC204-I/TL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EP256MC204-E/TL | DSPIC33EP128MC204-I/TL | DSPIC33EP64MC204-I/TL |
|---|---|---|---|---|
| Package | 44-VTLA (6x6 mm) | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same | 44-VTLA (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Performance | 70 MIPS @ 60 MHz, 16-bit dsPIC33E | 70 MIPS @ 60 MHz - same | 70 MIPS @ 60 MHz - same | 70 MIPS @ 60 MHz - same |
| Program FLASH | 256 KB (85.5K x 24) | 256 KB | 128 KB | 64 KB |
| RAM | 32 KB (16K x 16) | 32 KB | 32 KB | 32 KB |
| Operating Temperature | -40C to +85C | -40C to +125C (extended) | -40C to +85C | -40C to +85C |
| Motor Control Peripherals | MCPWM, QEI, op amps, comparators | MCPWM, QEI, op amps, comparators - same | MCPWM, QEI, op amps, comparators - same | MCPWM, QEI, op amps, comparators - same |
| Firmware Compatibility | Reference (dsPIC33EP family, DS70000657J) | Identical - binary compatible | Compatible if code <= 128 KB | Compatible if code <= 64 KB |
주요 차별점
- Extended temperature option in the same footprint (vs DSPIC33EP256MC204-E/TL)
- Maximum program memory in the MC204 family tier (vs DSPIC33EP128MC204-I/TL)
- Cost-optimized memory tier for simple drives (vs DSPIC33EP64MC204-I/TL)
설계 노트
Connect and decouple every VDD/VSS pair on the 44-VTLA package. Place a 0.1 uF ceramic capacitor within 2 mm of each supply pin pair plus one 4.7-10 uF bulk capacitor near the device. Per Microchip support documentation, all VSS and VDD pins must be connected - floating a supply pair causes erratic behavior and intermittent resets. Because the VTLA is a QFN-style package, the center thermal pad should be soldered to a grounded array of vias for both mechanical reliability and heat spreading.
ICSP programming requires matched PGECx/PGEDx pairs: if PGEC2 drives ICSPCLK, PGED2 must drive ICSPDAT - mixing pairs from different indexes will fail programming. Route at least one complete pair plus MCLR to a production header. Additionally, keep MCLR pulled up with a 10 kOhm resistor and add a 0.1 uF cap or diode arrangement to prevent spurious resets during motor-drive switching transients, since PWM gate-drive coupling can glitch an unfiltered MCLR line.
In motor-control layouts, separate the power stage ground return (gate drivers, shunt resistors) from the DSC analog ground, joining them at a single star point. Route ADC/op-amp sense traces as short differential pairs away from MCPWM output traces; the fast PWM edges (nanosecond-scale) couple capacitively into high-impedance analog lines and corrupt current-sense readings. Estimated: a 3 mm parallel run between a PWM trace and a 10 kOhm-impedance sense node can couple tens of millivolts of switching noise - enough to shift 12-bit ADC readings by multiple LSBs.
규정 준수 정보
RoHS compliant and lead-free per distributor listings (DigiKey). REACH, halogen-free, and conflict-minerals declarations not stated in verified data - confirm on Microchip compliance pages.
