DSPIC33EP512MC506T-E/PT - 60 MIPS 16-bit DSC | Microchip
부품 번호: DSPIC33EP512MC506T-E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $6.85 | $6.85 |
| 10 | $6.16 | $61.60 |
| 100 | $5.48 | $548.00 |
| 500 | $4.93 | $2,465.00 |
| 1,000 | $4.44 | $4,440.00 |
DSPIC33EP512MC506T-E/PT 개요
A digital signal controller combines the computational power of a microcontroller with the numeric throughput of a digital signal processor in a single core. In the system hierarchy, the dsPIC33EP family sits above general-purpose PIC16/PIC18 MCUs and alongside dedicated DSP chips, making it a power-management and control workhorse for embedded systems that need both control-loop code and DSP math on one die.
Key features include the 16-bit dsPIC33E pipeline core running at up to 70 MHz (60 MIPS), integrated motor-control PWM (MCPWM), quadrature encoder interface (QEI), CAN 2.0B for automotive and industrial networking, three on-chip operational amplifiers and four comparators for current-sense loops, and a PTG (programmable sequence generator) for offloading simple triggering tasks from software. The 12-bit ADC and DSP multiply-accumulate instructions support fast control loops.
Architecturally, the device uses an enhanced Harvard bus with DMA to feed peripherals such as the ADC, UARTs, SPI and I2C without CPU intervention. Flash retention and ECC-backed memory options in the 33EP generation improve reliability for automotive designs, while the extended-temperature E grade supports -40C to +125C environments.
Typical applications include precision brushless DC and PMSM motor control for industrial drives, automotive actuator control, digital power conversion (PFC, inverters), and sensor fusion nodes that require CAN connectivity.
Design consideration: budget for a clean 3.3V rail with local decoupling on every VDD/VSS pair, and verify which PWM/ADC functions are multiplexed onto RPn remappable pins early in the layout.
This page synthesizes distributor data, drop-in family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: DSPIC33EP512MC506T-E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: DSPIC33EP512MC506T-E/PT (동일 폼 팩터 및 풋프린트) — 차이점: Performance, Package, Connectivity, Core, Core Architecture.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
DSPIC33EP512MC506T-I/PT
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$5.55 / 개
데이터시트 보기 →DSPIC33EP512MC506T-H/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP512MC506-H/PT
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →DSPIC33EP512MC506-E/PT
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
DSPIC33EP512GP806T-E/PT
✅ 드롭인✓ 재고 있음
$8.62 / 개
데이터시트 보기 →DSPIC33EP512MC506T-E/PT 최대 정격 & 전기적 특성
| Core | 16-bit dsPIC33E DSC |
| Performance | 60 MIPS (70 MHz clock) |
| Program Memory | 512KB (170K x 24) Flash |
| RAM | 48KB |
| 공급 전압 | 3.0 V to 3.6 V (nominal 3.3 V) |
| 패키지 | 64-TQFP (10x10 mm) |
| 핀 수 | 64 |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +125C (E grade) |
| Qualification | AEC-Q100 qualified |
| CAN | CAN 2.0B controller |
| Motor Control | MCPWM, QEI (quadrature encoder interface) |
| Analog Peripherals | 3 OpAmps, 4 Comparators, 12-bit ADC |
| DMA Channels | 4 |
| Timers | 5 |
| External Interrupts | 4 |
| Connectivity | CAN, UART, SPI, I2C |
| Automotive Applications | Yes (AEC-Q100, automotive grade per distributor data) |
DSPIC33EP512MC506T-E/PT 64-tqfp (10x10 mm) 핀 구성 가이드
DSPIC33EP512MC506T-E/PT(64-tqfp (10x10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: DSPIC33EP512MC506T-E/PT.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
DSPIC33EP512MC506T-E/PT 적합 용도: 6 애플리케이션s: BLDC/PMSM Motor Drives, Automotive Actuator Control, Digital Power Conversion, Industrial Automation and Sensing Nodes, Embedded Motor Control Development Boards, Battery-Powered High-Performance Portable Equipment.
BLDC/PMSM Motor Drives
The DSPIC33EP512MC506T-E/PT is purpose-built for precision motor control: its MCPWM module generates complementary PWM pairs with dead-time control, the QEI decodes encoder feedback, and three on-chip op-amps amplify shunt currents ahead of the 12-bit ADC. At 60 MIPS with DSP MAC instructions, it executes field-oriented control loops at 10-20 kHz update rates. Place it as the main control IC between the encoder/current-sense front end and the gate-driver stage; unlike a generic MCU, no external encoder decoder or current amplifier is needed, cutting BOM cost and board area in industrial servo and traction drives.
추천
Automotive Actuator Control
AEC-Q100 qualification and the -40C to +125C E-grade temperature range make the DSPIC33EP512MC506T-E/PT suitable for under-hood actuators such as electronic throttle, turbo wastegate, pump, and fan modules. The CAN 2.0B controller connects the module to vehicle networks, while MCPWM drives brushed or BLDC actuator motors and the QEI handles position feedback. With 512KB Flash, multiple calibration tables and OTA updatable parameter sets fit without external memory. Designers should use AEC-qualified passives and review Microchip's automotive app notes for diagnostic and functional-safety patterns required by OEM spec sheets.
추천
Digital Power Conversion
In switch-mode power conversion - PFC stages, solar micro-inverters, and DC-DC converters - the DSPIC33EP512MC506T-E/PT closes voltage and current loops with the 12-bit ADC triggered synchronously from MCPWM. Its four comparators implement hardware cycle-by-cycle overcurrent limiting without CPU latency, and PTG offloads PWM pattern sequencing. DSP instructions run notch and PI compensators at 60 MIPS with headroom for nonlinear control. Compared to a fixed-function digital power controller, this DSC supports multiple topologies in firmware, so one PCB design can serve several product SKUs across the 3.3V industrial power line.
추천
Industrial Automation and Sensing Nodes
Factory nodes benefit from the device's combination of CAN, dual UART/SPI/I2C, and DSP filtering. Vibration or acoustic sensors can be sampled by the 12-bit ADC with DMA double-buffering (four DMA channels move data without CPU stalls), FFT-filtered using MAC instructions, and reported over CAN or RS-485 via UART. The extended -40C to +125C range survives panels and motor-adjacent enclosures, while 512KB Flash hosts protocol stacks plus a bootloader. Compared with a general-purpose MCU plus external DSP, this single-chip approach reduces component count, latency, and firmware complexity in predictive-maintenance sensor hardware.
추천
Embedded Motor Control Development Boards
The 64-pin TQFP package with 0.5 mm pitch is hand-solderable and probe-friendly, making the DSPIC33EP512MC506T-E/PT a strong choice for development and low-volume platforms. It runs Microchip's standard dsPIC33E toolchain (MPLAB X, ICD 3/REAL ICE, PICkit), with TMS/TCK/TDI/TDO JTAG pins multiplexed for debugging. The remappable RPn pin architecture lets one PCB support alternate pin assignments, easing layout iterations. Universities and startups commonly base motor-control teaching kits and pilot builds on this exact family because reference designs, libraries, and motor-control app notes from Microchip map directly onto its peripheral set.
추천
Battery-Powered High-Performance Portable Equipment
Portable professional equipment - power tools, diagnostic instruments, drones - combines battery operation with demanding control and DSP workloads. The DSPIC33EP512MC506T-E/PT runs from a single 3.0-3.6V rail, matching one lithium cell via a small LDO, and its peripheral architecture allows aggressive clock scaling for power management. The MCPWM/QEI combination handles brushless motor control in tools and UAV gimbals, while CAN or UART links to telemetry. With 48KB RAM and DMA, sensor streaming runs concurrently with control loops. Against a two-chip MCU+DSP solution, this DSC cuts quiescent overhead and simplifies single-supply battery system design.
추천
추천 제품 요약
엔지니어링 참조 데이터: DSPIC33EP512MC506T-E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | DSPIC33EP512MC506T-I/PT | DSPIC33EP512MC506T-H/PT | DSPIC33EP512GP806T-E/PT |
|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Performance | 16-bit, 60 MIPS (70 MHz) | 16-bit, 60 MIPS | 16-bit, 60 MIPS (60 MHz clock) | 16-bit, 60 MIPS |
| Flash / RAM | 512KB / 48KB | 512KB / 48KB | 512KB / 48KB (49,152 words each) | 512KB / 48KB |
| Temperature Range | -40C to +125C (E, AEC-Q100) | -40C to +85C (I) | -40C to +150C (H) | -40C to +125C (E) |
| Motor-Control Peripherals (MCPWM/QEI/OpAmps) | Yes / Yes / 3 op-amps, 4 comparators | Yes / Yes / 3 op-amps, 4 comparators | Yes / Yes / same analog set | No MCPWM/QEI/op-amps (GP peripheral set) |
| CAN | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B |
| Qualification | AEC-Q100 | Industrial grade | High-temp grade | AEC-Q100 (E grade) |
주요 차별점
- AEC-Q100 extended temperature qualification (vs DSPIC33EP512MC506T-I/PT)
- Integrated motor-control analog on one die (vs DSPIC33EP512GP806T-E/PT)
- Highest ambient ceiling in the 512MC506 family (vs DSPIC33EP512MC506T-E/PT)
설계 노트
Decouple every VDD/VSS pair in the 64-TQFP with a 0.1uF ceramic capacitor placed within 2 mm of the pin, plus one bulk 10uF capacitor near the supply entry. Connect AVDD to the 3.3V rail through an RC or ferrite filter and tie AVSS to a quiet analog ground island - the 12-bit ADC and on-chip op-amps inherit noise from the digital domain otherwise. Route JTAG (TMS/TCK/TDI/TDO) traces with a header footprint even if unused, since field debugging on populated boards otherwise requires disassembly.
Use the RPn remappable pin architecture deliberately: assign PWM outputs away from crystal and analog traces, and check for function conflicts between peripheral mapping and CN pull-up defaults before finalizing the schematic. For MCPWM complementary outputs driving gate drivers, keep the two traces of each pair matched in length where dead-time integrity matters, and route the QEI encoder inputs differentially-shielded from PWM switching noise to avoid miscounted quadrature edges in noisy motor-drive environments.
Three common mistakes: (1) Confusing temperature grades - the -E suffix is mandatory for AEC-Q100/extended environments; ordering -I parts saves cost but voids the +85C to +125C rating. (2) Assuming 70 MIPS - the datasheet headline is 70 MHz clock / 60 MIPS; PLL configuration errors yield silent 30 MIPS operation. (3) Ignoring RAM segmentation - the 48KB RAM is split into X/Y and near/far regions in the dsPIC33E compiler; DMA buffers must land in DMA-capable regions. Review the Microchip family reference manual section on memory maps before allocating large arrays.
규정 준수 정보
AEC-Q100 qualification and automotive applicability explicitly stated in Microchip USA and Hotenda distributor listings. RoHS/REACH/lead-free status not stated in provided web data - verify on Microchip's official product page.
